Kawasaki Sportsbike Riders Club - Australia - Online Forum

OUCH!!
1 hell of a work care claim coming me thinks!

I found mine on fleabay from the states, here's a couple I found for ya:
Disk: http://cgi.ebay.com/ebaymotors/ZX9R-Service-and-Repair-disc-cd-Part-numbers-zx-9_W0QQitemZ160211155814QQcmdZViewItem?hash=item160211155814
Haynes Manual: http://cgi.ebay.com/ebaymotors/96-03-Kawasaki-Ninja-ZX7-ZX7R-ZX9 ...

SHIT HAPPENS!!

Signed

Suggest keeping an eye out here:
http://www.graysonline.com.au/
They sell a truck load of pc's dirt cheap daily(I've brought 2)
Most will be sold from there & pumped back through Fleabay.

Read this at another bike site in the UK, hope like hell it's false!!!
http://www.zx-9r.net/phpBB2/viewtopic.php?t=8769" target="_blank" target="_blank

Are you sure you need a cam??
You running a standard can or after market?

Prior to E model they had a nut either side of the mount, but replaced the lower nut as it tended to break. As Dave#3 said just add a washer stack on top of the shim will give the same result, good starting point is 10mm up on the rear.

Only thing I may add to assist is remove the resevoir rubber from master cylinder cap & just use that while bleeding, it's easier than screwing cap off all the time & you can see when rubber guts sucked in as to when you need top up. I used heaps of rags around master area to stop splash & before ...

Checkout some of my mods to an E2(2000) & lemme know what links you need mate:
http://www.ksrc-au.com/phpBB2/viewtopic.php?t=15558

From what I've read most places you need to go up 10mm on the rear to get the 9's to perform better in cornering, both turn in & run out. Only down side can be tank slappers tho, so you may need to start at 10mm, test & see if you need to come down a few mm. This link may help:
http://upload4 ...

Been looking at the Pilot Power CT2's, heard great raps on them, dual compound tryes. Basically means they have a hard centre for less wear & stickier/softer sides for max cornering grip. Bloody pricey tho, saving $600 for a set now!!
http://two-wheels.michelin.com/2w/front/affich.jsp?codeRubrique ...

This may help?
http://www.repairmanualclub.com/

In a word.......LUNATIC!!!!!