Kawasaki Sportsbike Riders Club - Australia - Online Forum

Thanks Gos. I stripper her down again last night and had a good look at the clutch hub and it may be that it is the problem so to eliminate that I have ordered a new one, $170, but better than having to strip again, hopefully.
That will be all components that contact each other will have been ...

Been chatting on the turbo forum and Tack has suggested that there may be some imperfection in the slots of the starter clutch housing that holds the rollers, so will be stripping the clutch out again this weekend and checking that. Hopefully we will have some success as the thing will hardly engage ...

G'day Gos.
The clutch has slipped slightly with the original oil and worse after the rebuild with semi-syn oil. In other words it has always slipped but is now real bad.
After I rebuilt the engine I filled with Penrite 15W50 Semi syn. Originally I used to run Penzoil 50. The clutch did slip ...

Gents, its been some time and I am on the bludge.
The Turbo I started around 12 months ago has been fully rebuilt and does not look too bad.
I am usually on the turo.com forum but have a problem that some of you may be able to help with.
During the rebuild I replaced the starter clutch with a new ...

Hi guys,
I've been browsing this great site for a while now and am in the process of rebuilding a 1985 turbo. I would like to have the forks rechromed but have noticed the non-return valve in the bottom of the fork and don't know if it should come out, and if so, how. Maybe the electroplating can be ...