$10 Carburetor Synchronisation
Mon Sep 12, 2005 8:28 pm
Some guy had an idea to use pipe and oil to synchronise his twin, so I thought why can't that be used for 4-stroke.
So I bought 4mm hose, garden tap (not needed actually), and a broom handle to make it a bit nice. Put some oil in it.
The theory is for different suction, oil will move -- while when balanced oil will stay put.
So first I balanced carb 1 & 2 (first screw, shown on pic)
Then carb 3 and 4 (3rd screw)
And finally carb 2 & 3 (2nd screw).
And all good and smooth!! Thanks for that I saved $150 bucks (and consequently $200 every 4 months)
So I bought 4mm hose, garden tap (not needed actually), and a broom handle to make it a bit nice. Put some oil in it.
The theory is for different suction, oil will move -- while when balanced oil will stay put.
So first I balanced carb 1 & 2 (first screw, shown on pic)
Then carb 3 and 4 (3rd screw)
And finally carb 2 & 3 (2nd screw).
And all good and smooth!! Thanks for that I saved $150 bucks (and consequently $200 every 4 months)
- Attachments
-
- Synchronizing carb 1 and 2
- IMG_5919.jpg (54 KiB) Viewed 3224 times
-
- Don't worry about the bubble in oil. They'll be gone in a week time
- IMG_5920.jpg (54.45 KiB) Viewed 3222 times
Mon Sep 12, 2005 8:37 pm
Smart! 
More pics pls.
More pics pls.
Mon Sep 12, 2005 8:49 pm
4 mill tubing, eh?!
good one!
good one!
Tue Sep 13, 2005 9:41 am
RG wrote:More pics pls.
yes please - afraid I can't really see what you've done.
Can you show a pic o fthe hoses/broom/oil on their own - and then attached to the bike?
thanking you muchly mr javaman
ty
PS of course you still need a temp fuel source yes?
Tue Sep 13, 2005 4:30 pm
Tue Sep 13, 2005 9:22 pm
I have a set of vacuum guages and feeler guages
if anyone wants some help with their carb sync and valve clearances, I respond
especially well to bribes involving home cooking and/or alcohol
(I'm also organising a spanner day in a few weeks from now if anyone is interested)
if anyone wants some help with their carb sync and valve clearances, I respond
especially well to bribes involving home cooking and/or alcohol
(I'm also organising a spanner day in a few weeks from now if anyone is interested)
Wed Sep 14, 2005 10:35 am
Androo wrote:I have a set of vacuum guages and feeler guages
if anyone wants some help with their carb sync and valve clearances, I respond
especially well to bribes involving home cooking and/or alcohol
(I'm also organising a spanner day in a few weeks from now if anyone is interested)
do the vacuum guages work well or are the mecury ones better
Wed Sep 14, 2005 10:49 am
mrmina wrote:do the vacuum guages work well or are the mecury ones better
well, "vacuum guages" really refers to the general category of devices that
measure vacuum, so mercury falls into that
the one I've got is a "carbtune II" and uses light metal rods - its more then
accurate enough to do carb sync
(I've also got a free method of doing carb sync .. got within +- 2mgHg using it)
Wed Sep 14, 2005 1:24 pm
ok.
cos when i was looking around i'd seen actual guages that look like a speedo/tacho. I though thats what u meant.
the carbtune is good. I've investigated it but too pricey.
cos when i was looking around i'd seen actual guages that look like a speedo/tacho. I though thats what u meant.
the carbtune is good. I've investigated it but too pricey.
Wed Sep 14, 2005 8:11 pm
mrmina wrote:ok.
cos when i was looking around i'd seen actual guages that look like a speedo/tacho. I though thats what u meant.
the carbtune is good. I've investigated it but too pricey.
ahh yes, those things
well you're welcome to use the carbtune if you want (I prefer not to lend tools
out, but I can bring it over for u)
Wed Sep 14, 2005 11:37 pm
The guage ones are expensive because they have to be calibrated. No point using them if they all read differently to the same amount of vacuum. Friend of mine has a mercury balancer. Instead of using U shaped tubes it pulls mercury from a common tank. Works the same as the guages, you can do all 4 carbs at the same time and you have nothing to calibrate. Saves having to swap hoses like you do with the U shaped glass ones. Don't think you can get them anymore because of the mercury.