Got Screwed

For general Technical and Performance Discussions

Got Screwed

Postby not_sane » Mon Sep 12, 2005 8:35 am

not just talking about paying to much for my bike,

Got home from my holiday early to have sunday off before work and go for a ride and I picked up a one inch screw, well i found it yesterday anyway. right in the middle of the tyre in the tread gap.

I had to pump it up twice over 2 15km trips. had to pull up a bit hard and the back wheel was rolling round like jelly on a blow up mattress. interesting tho.

just curious if its worth getting a new tyre. the tyre has only done around 1000kms. should i patch it? take it to the shop and get them to patch it up with some nice hot rubber or get a new tyre? have a small lack of funding atm due to car rego and bike insurance.

being sunday, no one is open :evil: wasn't happy.
Was sane.. And I aint going back
not_sane
Newbie
 
Posts: 9
Joined: Thu Aug 25, 2005 7:55 am
Location: Brisbane Bayside

Postby redzedx7r » Mon Sep 12, 2005 8:54 am

:? you can get it plugged as long as it didn't damage the side wall, but you will have to rember its just a rubber plug and some glue so go easy on it (ok for commuting but do go scratchin or track days on it :( )
life half lived is no life at all

[url]http://tinypic.com/k85zd.jpeg[/url].


01 ZX9R (Red ofcourse!)
redzedx7r
KSRC Member
KSRC Member
 
Posts: 484
Joined: Sun Aug 01, 2004 11:17 am
Location: wish i was in Brisvegas
Bike: ZX9R
State: Queensland

Postby not_sane » Mon Sep 12, 2005 9:07 am

how about a plug and a patch on the inside?

where abouts in brisbane are you?

did you just get the burgandy zx7. hell of a nice bike!
Was sane.. And I aint going back
not_sane
Newbie
 
Posts: 9
Joined: Thu Aug 25, 2005 7:55 am
Location: Brisbane Bayside

Re: Got Screwed

Postby Jonno » Mon Sep 12, 2005 9:17 am

not_sane wrote:I had to pump it up twice over 2 15km trips. had to pull up a bit hard and the back wheel was rolling round like jelly on a blow up mattress. interesting tho. .


I know your pain, 2 holes in a week, I would say if the tyre was slipping/rolling around the rim you would have injured the side wall and likely the whole structure of it.
Get a new tyre for sure, if you are in a tight spot a plug will do for a short while but go careful really careful, anyway for someone to remove the tyre, plug n patch from the inside and refit,balance, and install on your bike is time consuming and will cost you a bit in the end.
A new rear tyre should be easily be bought for $240 anyway. Ask anyone they will tell you where in Brisbane. :wink:
User avatar
Jonno
Mobile Chicane
 
Posts: 5613
Joined: Thu Dec 30, 2004 4:10 pm
Location: Brisbane
Bike: Other Kawi
State: Queensland

Postby not_sane » Mon Sep 12, 2005 9:54 am

it wasn't on the rim. just flat. to around the level that the tread was nearly flat on the ground. nothing more then that.

I'd pull the tyre off. gotta learn sometime and i've got some friends with a tyre remover. hopefully i can get out of this soon. i want to go for a ride now... work sucks too....
Was sane.. And I aint going back
not_sane
Newbie
 
Posts: 9
Joined: Thu Aug 25, 2005 7:55 am
Location: Brisbane Bayside

Postby booze » Mon Sep 12, 2005 10:19 am

hehehe same thing happened to me mate
http://www.ksrc-au.com/phpBB2/viewtopic ... ight=screw
i got it plugged and there were no dramas what so ever. just make sure u get the better qual plug, not cheap versions :)
booze
KSRC Member
KSRC Member
 
Posts: 110
Joined: Wed Sep 08, 2004 2:48 pm
Location: Mandurah, WA

Postby RG » Mon Sep 12, 2005 11:41 am

not_sane, which tyre? rear? front tyre?

I was told that it is illegal to ride with a patched front tyre, simply becoz it's not safe.

Which part of BNE are u at?
"...The credit belongs to the man who is actually in the arena." - Theodore Roosevelt
RG
KSRC Contributor
KSRC Contributor
 
Posts: 1454
Joined: Tue Nov 30, 2004 11:28 pm
Location: WA
Bike: It's not worth Mentioning
State: Western Australia

Postby red_dave » Mon Sep 12, 2005 11:44 am

I had 2 in the same tyre at the same time... :shock:

I gave it to a mate at ProHonda and he fixed it... Then he went to ride it home and found the second one... :lol:
Image
User avatar
red_dave
Team Kuda
Team Kuda
 
Posts: 7973
Joined: Thu Oct 07, 2004 12:47 pm
Location: Dodgy BrisVegas
Bike: ZX6R
State: Queensland

Postby MadKaw » Mon Sep 12, 2005 11:45 am

You can have it patched using a plug from the inside of the tyre.
They take the tyre of the rim and glue a plug and base in from the inside.
I did this to my 7 and it was fine for the rest of the tyres life, including a couple of track days... :roll:

No one will tell you its ok though, too many liability issues...
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
MadKaw
Administrator
Administrator
 
Posts: 9670
Joined: Tue Apr 20, 2004 4:33 pm
Location: Windsor or the Creek..
Bike: ZX10R
State: New South Wales

Postby not_sane » Mon Sep 12, 2005 12:08 pm

rear tyre,

thanks madkaw,
that sounds pretty good. will be goin as soon as i can get home from work

i'm in manly, bayside.
Was sane.. And I aint going back
not_sane
Newbie
 
Posts: 9
Joined: Thu Aug 25, 2005 7:55 am
Location: Brisbane Bayside

Postby HemiDuty » Mon Sep 12, 2005 12:26 pm

I had a plug in the front of the Zephyr and it never had any problems, including fast (well as fast as I can go anyway) road riding.
Drmsby Middleton
DC Racing

Extreme Motorsports
M2R
Castrol
ColourSmart Chroming
Hi Side Leathers
Teknic
Sidi
DID Racing Chain
Goodridge
User avatar
HemiDuty
KSRC Contributor
KSRC Contributor
 
Posts: 1963
Joined: Mon Mar 28, 2005 6:27 pm
Location: Brisbania
Bike: Don't have one
State: Queensland

Postby not_sane » Tue Sep 13, 2005 2:51 pm

dropped it off this morning for them to have a look but most likely plug. pick it up this afternoon.
Was sane.. And I aint going back
not_sane
Newbie
 
Posts: 9
Joined: Thu Aug 25, 2005 7:55 am
Location: Brisbane Bayside


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 7 guests