ZX6R, ZX10R, ZX14R, Ninja 1000 etc
Sat Apr 05, 2014 5:12 pm
How u all going ? My 08 zx10 forks with ssk ktech piston kit and sprung for my weight with 33mm of sag rebound 7 out from full hard.compression 12 out from full hard .I put a cable tie around the fork tube and its pushing down to about 25mm from the bottom of the fork tube .road riding.Question is are my springs to soft? this was achieved not even braking overly hard .The forks can be compressed easily just bye pushing down hard on the bars feels a bit soft to me. cheers and thanks for everyones time.
Sat Apr 05, 2014 5:24 pm
Soft isn't bad on the road.
I'm 95kg and still running the stock fork springs but revalve forks.
Only time I bottomed out propper was downhill over corrugations into 20km/h corners.
Mon Apr 07, 2014 12:53 pm
All good my wife helped me measure my sag and didn't measure it right

one of the boys came over and i had way 2 much sag know i have the correct amount and bike feels 100% better
Tue Apr 08, 2014 11:44 am
sillywilly wrote:All good my wife helped me measure my sag and didn't measure it right

one of the boys came over and i had way 2 much sag know i have the correct amount and... ...feels 100% better

There's something seedy and funny about this post
Tue Apr 08, 2014 2:48 pm
Ha ha u are right Tim this post does sound seedy
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.