Another Rebuild Project - GSXR-1000 K8 **COMPLETED PICS** !!

Hi all,

Well the 2013 Triumph 675 did not last very long, it was an exceptional bike to ride and had the potential to be very fast on the track (which I experienced myself at Philip Island over 2 days testing and tweaking the suspension) but now I have decided to rebuild a Suzuki GSXR 1000. I have done a GSXR750 once before, but this time I thought I would give the big one a go and do a 1000.

Of course I have spent a few good nights totally stripping this beast down and cleaning, replacing parts, sorting the electrics out (as some previous owner just had no idea how to set a bike up correctly) and we are up to this stage at the moment. It's looking very good, nice and straight and is humming along beautifully.

This one has a full akrapovic twin exhaust (which I really like the look and sound of), and all of the track mods I would normally do, disconnecting the secondary air injection, removing the exup motor, GB racing engine casing protectors, Woodcraft frame sliders, still coming are the shorty levers, rearsets, Cox radiator guard, braided front lines, BMC street filter. It has only done 10,000 k's and sounds great. Just fully serviced today.. just waiting for more parts to arrive..

Here is is to date... more progress pics will be coming..

Macca

Attachments

PIC_0116.jpg (53.72 KiB) Viewed 10463 times

PIC_0117.jpg (57.96 KiB) Viewed 10463 times

PIC_0119.jpg (58.41 KiB) Viewed 10463 times

PIC_0120.jpg (26.6 KiB) Viewed 10463 times

Last edited by Maccarocks on Tue Apr 01, 2014 5:54 pm, edited 2 times in total.

Love that exhaust.

Yes Baddie.. I also love the exhaust, and it sounds excellent too, not too loud and really balances up the look of the bike

I have progressed fairly quickly on this rebuild.. with almost all of my parts arriving in the same week !! So I will be busy for the rest of this week and the weekend getting everything totally finished... but I am back to the island on Monday and Tuesday for some testing (on the ZX10, then racing the following weekend, so my focus will have to swing onto the ZX10 for a week or so until round 1 is complete

But I should have a heap of new pics to post after this weekend.. stand by for more..

Macca

Hey all,

I have been working pretty much flat out on the Gixxer over the past week or so, and it's running and sounding really sweet.. It was one of those weeks that all the spare parts I ordered just seemed to arrive in a couple of days.. It was great !! Got the race glass all fitted and the wiring sorted.. so here are a few more pics before the paint..

Macca

Attachments

PIC_0140.jpg (169.52 KiB) Viewed 10359 times

PIC_0144.jpg (137.35 KiB) Viewed 10359 times

PIC_0146.jpg (55.48 KiB) Viewed 10359 times

Yet again ,another great bike in the waiting !!Awesome Macca !! great to see this !

More movement on the Gixxer..

I have had the whole front end out, forks completely apart & serviced... Like new but with a few track mods.. Fitted back with 8mm slid through the top triple clamp.

New brake pads, complete caliper clean / lube & fluid flush (RBF 600)

Gearing is also done, -1 front (steel) & +1 rear (alloy)

Waiting for the race glass to come back from the painters...

Rear shock to come out and service as well, plus 4mm spacer to go in... Then fit it all together with the glass and test ride !!! so only a couple of weeks to go before the test run, hopefully on the 7th of April at the island..

After that I will have to focus on set up and practice at Broadford on the ZX10 for round 2 of the Vic Interclub series...

More updates and pics coming..

Macca

All track mods have been completed, glass painted, all back together and ready to test next week at PI..

Another excellent project that was very easy to work on.. Finished up better then I thought..

Macca

Attachments

PIC_0156.jpg (105.54 KiB) Viewed 10220 times

PIC_0157.jpg (115.68 KiB) Viewed 10220 times

PIC_0159.jpg (93.41 KiB) Viewed 10220 times

PIC_0163.jpg (118.74 KiB) Viewed 10220 times

PIC_0165.jpg (112.46 KiB) Viewed 10220 times

PIC_0167.jpg (88.45 KiB) Viewed 10220 times

How come you are able to get all this done in less time than it has taken my clutch cable to get here.

In all seriousness it is a very nice looking bike and I bet it will sound amazing

How come you are able to get all this done in less time than it has taken my clutch cable to get here.

He never works.........

Hi bjn_42.. yes it does sound fantastic with the twin system... very deep, not too loud..

and Johnny Mac.. I have very good time management skills !!

Cant wait to take it for a test ride probably next week at PI...

Now back to work for me LOL

Macca

And yet again another great build Macca....

Great looking bike you got there Macca.

Looks good Macca, another immaculately presented bike.
Love your work.