ZX14 lowering pegs

I have a new zx14 and would like to lower the pegs for a bit more leg room. Anyone know of some options

I have a new zx14 and would like to lower the pegs for a bit more leg room. Anyone know of some options

These are good, (Vortex rearsets)
Adjustment Range – Back:0-20mm & Down:20mm, Up:10mm – 10mm increments, 12 positions.



You may need to change the brake line that goes between the rear slave cylinder & the ABS pump to a flexible one if you want total adjustment.
See item # 43060B


If you hunt around they can be had for a little over $300 US




Fred

Another option would be to raise the seat

The seat is not an option as I already did the controls a reach

I have a new zx14 and would like to lower the pegs for a bit more leg room. Anyone know of some options

Why don't you try talking to SNAFU, he lowered the rear pegs (very tidy job indeed), maybe he might have some thought's on fronts.

Knight Design will come up if you search Ebay in the US.
Not cheap but very high quality finish.
They drop a full inch but you will need to loose the stock exhaust covers or be running aftermarket.

double bubble.

Last edited by 1400R on Tue Aug 20, 2013 8:57 pm, edited 2 times in total.

How about off the shelf loweriñg kits for pillion pegs, as someone said SNAFU fabricated his but my metal working skills are somewhat lacking....

http://www.motorcyclelarry.com/index.ph ... cts_id=158

These will do the job.

Just for clarity it is the front rider pegs I want to lower

Sorry MKY. Your threads getting jacked a bit.
The Knight Design ones I mentioned are good.
the rear link was for kawasinley..
http://www.knightdesignllc.com/index_fi ... otpegs.htm

I just fitted a pair of Knight Design 1" 3/8 lowered pegs with the Quadtrax tread and they have made a massive difference for comfort.
I'm 6'5 so I need all the legroom I can get - these pegs are awesome - build quality is exceptional and totally worth the $$$.
Just need to trim a little thread off the footbrake adjusting rod so I can bring down lower