Wed Oct 03, 2012 5:25 am
Jonno wrote:Hey, if your fouling a plug often ya gotta ask why. I would suggest to stretch it to 32 or 35:1, the big CR loves 40. If ya jeting ain't right ya will have shite
Jonno I'm running 50:1 which is standard for the WR.
Timmy got fully booked weekends, can you do a weekday?
Wed Oct 03, 2012 6:48 am
WR200?????
Wed Oct 03, 2012 7:35 am
Husqvarna WR250 2006
As per manual:
LUBRICATION
Engine...............3% (1:32) of oil-gasoline mix
during running in; NOT LESS than
2% (1:50) when running in is over
Wed Oct 03, 2012 8:34 am
Sounds like its got too much oil if the plug is gunking up after 2 rides.
I would recommend taking some emry paper & rag to clean up the plug.
My RMX 250 had issues similar, I reduced the ratio and eliminated the problem.
Wed Oct 03, 2012 9:23 am
Its not just fouling the plugs, its killing them as well, as in totally dead no spark.
The plugs are now a dark tan colour after 1/2 day of riding, (plug chop at end of riding) & black n sooty after 2 days basically.
Wed Oct 03, 2012 9:30 am
Oh I was thinking Yamaha....
Wed Oct 03, 2012 9:36 am
Buy cheapo plugs with the big electrode.
Last longer.
More revs rob!!!
Wed Oct 03, 2012 10:08 am
Got it wattie!
Wed Oct 03, 2012 11:09 am
Doesn't sound to me like oil fouling, sounds like too rich mixture.
If you go to less oil, 50:1 as opposed to 32:1, you will probably have to go down a size on the main jet, and drop the needle a notch, as the bike will be running too rich.
Sounds counter intuitive I know, but think of it like this, the engine will suck in x amount of mixture, the less oil there is in that mixture, the more fuel there will be, more fuel = rich mixture.
Do a plug chop at wot, see what colour the plug is and change the main jet to suit, once you have the main jet sorted do a plug chop at half throttle and alter the needle position to correct the mixture.
Your plugs should last heaps longer, and not foul again if you do this correctly.
Forgot to ask, does the carby have a power jet?
Wed Oct 03, 2012 1:42 pm
If you're not riding it full noise Rob, it may be the pilot jet oiling the plug.?
They tend to put fat pilots in standard.
Dropping down a couple of sizes may help.
My old KX used to foul plugs, so I changed pilot jet, made a difference but didn't totally fix my problem but plugs lasted a bit longer, so I adjusted the float level thinking it was getting too much fuel and that fixed it.
Wed Oct 03, 2012 2:56 pm
Thanks guys, don't want to get into the status of jetting in this thread, I have done the float level (well glen has) I have done the pilot jet ranging 3 sizes to & that made a big change, basically I am still trying a few things looking for the best performance........ worst problem is with a new head kit, I was almost starting from scratch
Wed Oct 03, 2012 3:42 pm
robracer wrote:Jonno wrote:Hey, if your fouling a plug often ya gotta ask why. I would suggest to stretch it to 32 or 35:1, the big CR loves 40. If ya jeting ain't right ya will have shite
Jonno I'm running 50:1 which is standard for the WR.
Timmy got fully booked weekends, can you do a weekday?
Nah not really I'm working arvo shift atm but I do have Thursdays off.... Don't get home till 1.30am so early starts will be hard

hopefully the weekends free up lol.
Have you heard from disco? Been meaning to call him as he has been quiet lately.
Cheers mate
Wed Oct 03, 2012 3:48 pm
He has no time to ride at the moment
Wed Oct 03, 2012 6:42 pm

boo!!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.