For general Technical and Performance Discussions
Sun May 06, 2012 3:44 pm
Has anyone had any experience using one of these kits or similar brands?I'm interested in trying a few different reels to find the ideal one for the street.(I'm looking to increase rather than reduce the twist.Pensioner pack

)
http://www.motionpro.com/motorcycle/articles/view/217/revolver_variable_rate__vr__throttle_kits/
Sun May 06, 2012 4:04 pm
I have a rifleman setup,cheap and works well.
Sun May 06, 2012 4:20 pm
Increase twist as in, less acceleration per turn?
Sun May 06, 2012 4:20 pm
Rifleman doesn't increase the twist
I am curious though, why on earth would you want it longer??
Sun May 06, 2012 5:28 pm
I've got that one, reasonably happy with it, I've got the 2nd quickest throw on it and I would like the quickest but I can't use it.
When it's put in,due to the cables they supply that you need to use,it actually doesn't allow the throttle to return completely and it sits there revving at 2000rpm.
Sun May 06, 2012 5:30 pm
Blurr wrote:Rifleman doesn't increase the twist
I am curious though, why on earth would you want it longer??
I think he said something about old. Shouldn't you be looking at this too Blurr........ :-b
Sun May 06, 2012 7:10 pm
mate those kits only reduce the amount of throttle travel - not increase it.
The slowest throttle rate you will get, is with the OEM throttle. Stick with that
Sun May 06, 2012 7:57 pm
Jonnymac wrote:Blurr wrote:Rifleman doesn't increase the twist
I am curious though, why on earth would you want it longer??
I think he said something about old. Shouldn't you be looking at this too Blurr........ :-b
Fark off.
I take it you are coming to PI Or ECto show me around then you young pup.
Sun May 06, 2012 8:07 pm
Blurr wrote:Rifleman doesn't increase the twist
I am curious though, why on earth would you want it longer??
You are write,i just thought wrong

i have never seen anyone that wants more twist
Sun May 06, 2012 8:13 pm
MAXUMIS wrote:Blurr wrote:Rifleman doesn't increase the twist
I am curious though, why on earth would you want it longer??
You are write,i just thought wrong

i have never seen anyone that wants more twist

Yeah mate me either, I had to read it a couple of times for it to sink in as well
Sun May 06, 2012 8:16 pm
GP is on ,on ONE then ten
Sun May 06, 2012 10:51 pm
I want mine replaced with a light switch if I can..
Sun May 06, 2012 11:06 pm

@ the light switch.
Seems i'm Robinson Crusoe.As Gos said looks like they all shorten the twist.I misread it as either way.Was just a thought as due to losing my car i'm commuting on a 1000 and thought the idea of a gentler throttle may be useful.
Sun May 06, 2012 11:15 pm
Just ride a gear higher

)
Much cheaper
Sun May 06, 2012 11:21 pm
Check the diameter of oem, and compare to the revolver pulleys, the slowest pulley is probably smaller than oem I'd be guessing. You get a decent housing and cables in the kit, but doesn't sound like you need it. Can also interfere with bikes with large integrated switchblocks and mcyl arrangements depending on the model.
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.