removing the starter motor on a gpz900r

For general Technical and Performance Discussions

removing the starter motor on a gpz900r

Postby dangerman » Mon Jul 04, 2011 8:06 pm

Hi can you guys help with hints to removing the starter motor on a gpz900r. I' ve looked in service manuals but there it has not been particularly helpful. Any ideas please. dangerman.
dangerman
Newbie
 
Posts: 1
Joined: Sun Mar 28, 2010 7:42 pm
Bike: GPz900
State: New South Wales

Re: removing the starter motor on a gpz900r

Postby h.b.bear » Mon Jul 04, 2011 9:38 pm

not sure on your year model,but this little bit might be of some help

http://www.kawasakimotorcycle.org/forum ... ssues.html
h.b.bear
KSRC Contributor
KSRC Contributor
 
Posts: 1175
Joined: Wed Oct 27, 2010 2:21 pm
Location: Tamworth NSW
Bike: ZRX
State: New South Wales

Re: removing the starter motor on a gpz900r

Postby MAXUMIS » Mon Jul 04, 2011 9:57 pm

disconnect the battery first and the rest should be a peice of cake if it fits between the frame +motor hear is a pic of the starter it should be behind the blockImage
life starts at 200 kph!
User avatar
MAXUMIS
KSRC Contributor
KSRC Contributor
 
Posts: 1034
Joined: Fri Jul 09, 2010 7:16 pm
Bike: ZX12R
State: New South Wales

Re: removing the starter motor on a gpz900r

Postby JonW » Tue Jul 05, 2011 9:37 pm

MAXUMIS wrote:disconnect the battery first and the rest should be a peice of cake if it fits between the frame +motor hear is a pic of the starter it should be behind the blockImage


If you want the starter clutch then the motor has to come out and the gear case gets split.
Compact yes, easy to work on, not so much.
JonW
Warming up
Warming up
 
Posts: 47
Joined: Tue Oct 05, 2010 9:45 pm
Bike: GPz900
State: New South Wales


Return to General Tech & Performance Talk

Who is online

Users browsing this forum: No registered users and 13 guests