Discuss riding techniques, styles and tips here.
Sun May 22, 2011 9:49 pm
When I firstrode Chris's bike the first thing that struck me that was beyond 12000 there's not much else so changing about there seemed to work ok, and just smash the throttle stop everywhere.Most fun I've had on a bike ever, except for the Rex
Last edited by
Glen on Sun May 22, 2011 9:56 pm, edited 1 time in total.
Sun May 22, 2011 9:54 pm
Id offer my advice but on friday I realised how shite I ride so no point in saying too much
Sun May 22, 2011 10:02 pm
fireyrob wrote:Id offer my advice but on friday I realised how shite I ride so no point in saying too much

But how good is that suspension now
Sun May 22, 2011 10:17 pm
fireyrob wrote:Id offer my advice but on friday I realised how shite I ride so no point in saying too much

maybe he'll know what not to do
Tue May 24, 2011 1:12 pm
Glen wrote:When I firstrode Chris's bike the first thing that struck me that was beyond 12000 there's not much else so changing about there seemed to work ok, and just smash the throttle stop everywhere.Most fun I've had on a bike ever, except for the Rex

Nice save Glen!:)
Tue May 24, 2011 10:18 pm
ducati_paul wrote:Get a Dyno run done on your bike, see where it makes peak power and that's when you should be changing gear, going to the redline you'll be past peak power.
I haven't done any TD's but prolly will eventually and intend on coming to a few to have a watch soon but I'm curious.....Is it max power or max torque you want. I haven't dyno'd my 250 (don't see much point as it's only stock) but the manual gives max power at 11Krpm but max torque at 9.5Krpm?
Tue May 24, 2011 10:24 pm
Stick to your torque curve
Tue May 24, 2011 10:33 pm
Trox wrote:..... but I'm curious.....Is it max power or max torque you want. I haven't dyno'd my 250 (don't see much point as it's only stock) but the manual gives max power at 11Krpm but max torque at 9.5Krpm?

.......
what Blurr said - the response you *feel* is the torque curve. The rpm at which the peak torque and rpm occur, is always different, and the rpm for the maximum hp is *always* above that of maximum torque.
You
build a motor for high hp, but
tune it to get the best torque curve......because this gives you the best power
delivery.
Wed May 25, 2011 5:52 am
So looking at that chart I put up you'd want to be changing gear at 6800?
Wed May 25, 2011 10:33 am
ducati_paul wrote:So looking at that chart I put up you'd want to be changing gear at 6800?

Considering it is a FJR1300 dyno chart, yes
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.