The 4th gets a new addition.......

Picked up a new bike today - one I have lusted after for many years........

the one I collected is not quite in this condition - but nearly everything is there, the bodywork needs some TLC, but by and large it should be a pretty easy build. Previously belonged to a member of cR down here, was bought as a 'project' bike, and now it has a new home in the 4th.

These rigs were never as popular as the GPz900R, the motor is basically identical to the 900R but bored and stroked out to 997cc. The frame is a steel 'perimeter' frame, its pretty big across the beam !! ...

This motor continued being used for many years after this model was discontinued. The ZX10 from 87/88 used the same motor, with some changes to the valve train and a lighter crank. This engine was upgraded again for the ZZR1100 with bigger valves and larger crankpins, but retained the 58mm stroke.


Plenty of work to do with this bike, the engine is complete but head is off, clutch basket has a couple of broken spring towers so this will need to be replaced. Lots of boxes of .....stuff.....to sort through. Should be lots of fun....

Attachments

GPZ1000RX.jpg (52.05 KiB) Viewed 4531 times

Last edited by Gosling1 on Sat May 15, 2010 7:16 pm, edited 2 times in total.

Nice one...is it that colour...

Yes mate, same colour as that. The fairing panels need the most work, the rear seat panel sections are all in pretty good nick.

One thing I will change if I can find the right bits, are to replace the stock 16" wheels with some 17" wheels from a GPz900R of around 1987/88 onwards. Much better range of rubber, and better handling as well.

You've probably got a manual for that I suppose...

I think I do have one kicking around somewhere mate ....

Lots of reading to do though, as I was telling Corvus' old man today - I can do a build on an air-cooled Z motor in my sleep......but have never really gotten into this generation of motors. It should be a lot of fun !

I was wondering when it was going to work its way into the 4th

Nice pickup Gos

cheers mate - yes, it was inevitable really

I wonder how many of the Z Rex mafia know that the origins of the motor in their bikes comes from this model ?

Nice buy gos! Doesn't look as nice as the 900 but!!

Good pick up Gos. Pics or it didn't happen though......

very 80's Night Rider Gosoline !

Nice pickup Gos - I quite like the GPZ range and the 1000RX is a nice bike. Looking forward to seeing pics

cheers mate - yes, it was inevitable really

I wonder how many of the Z Rex mafia know that the origins of the motor in their bikes comes from this model ?

Yeah, I was thinking as I was reading your original post, when you mentioned the origins.........GpZ1000RX, ZX10, ZZR......and I am thinking ...and the ZRX...!!! Good to see you redeem yourself.

What all that means though, is it will probably have shitty cams like ALL those models have!!!! Go get Ivan to make some new ones while your doing the build and save yourself the grief later.

Gos Mate
It was a deal, I was a steal, in fact it was the sale of the fucking century!!
But!
It wasn't as good as my FZR600 (thanks 98ninja)

Cool Gos, pics?

Good pick up Gos, looking forward to the rebuild story, in the somewhat not to distant future