GPX250 fender eliminator

Wanting to do a fender eliminator on my gpx. but im not really keen on taking a saw to the stock fender down.

any suggestions on where to get a kit, or what to use to make my own?

go to a wrecker and buy a second hand fender and chop it up as to not destroy the origional

ebay might have a few in america (ex250) or make one from some metal sheet???

I'm with Gazza.
You won't find an aftermarket one (I think) and will need to make your own mods.
So if you don't want to risk screwing up the one you have - grab another.
ty

And if you're going to cut it down, you can get a slightly damaged one for less $, too. That's what we did with my son's FZR250; the original fender was the size of a wheelie bin lid.

go to a wrecker and buy a second hand fender and chop it up as to not destroy the origional

yeah buy another and cut it up

can post a pic of mine if you want to see what it looks like the way i did it
also i would suggest getting the indicators up next to the brake lights so look at ebay america/japan for the lenses or if you want you could get front and rear smokes lenses that way it all matches which i thought about doing

go to a wrecker and buy a second hand fender and chop it up as to not destroy the origional

yeah buy another and cut it up

can post a pic of mine if you want to see what it looks like the way i did it
also i would suggest getting the indicators up next to the brake lights so look at ebay america/japan for the lenses or if you want you could get front and rear smokes lenses that way it all matches which i thought about doing

always thought changing back to the factory indicators next to the brake light was a defect!!

pretty sure it is, something about them being too close together.

Doesntr matter now though, my bike now lies in many pieces at the smash repairer awaiting an assessor to write it off due to an unfortunate highside.

managed to escape with very minor injuries, a bit sore but nothing serious.

Mate - not cool. Hope you're OK. Road or track?

that not cool highsiding not fun whatsoever hope you are ok and bike gets repaired

damn and highsiding on a gpx250 wow

yeah, on the road, rear wheel hit an oil patch half way through a corner and sent me out of control, highsided off the gutter.

Im fine, a few bruises and some light grazes. Thank god for leathers.

Ill be picking up my 'new' ER-5 next satruday, no time like the present to upgrade

haha very true