ZXR750 The Tale of Woe to Go

That looks shit hot Mick!!! [/u]

That looks pretty fricking neat .

b.t.w. r.e. the forks, the reason for the rattle gun is theres a fork inner and outer, and there's a plunger between them. You press down on the fork inner, and the load from the spring holds the plunger in place so they can rattle it out.

you can try turning the allen bolt, but it'll just keep twisting and twisting and twisting until you go nots, you really need the impact shock to jar it out.

I've taken Andii's advice and Lucas's lack of interest I think he has found someone else to play with....

I found a new owner of an old bike repair shop in Epping to do the fork seals. Simply cos I want the front end on to mock up the bike. If he does a the job, he'll get a rap on here. Oh and his mate rides a CRIM, it'll be in the Eletromold entry at the show and shine at the GP.

Oh and Matt it is still gunna be a trackie that rides on the road....

Plas is part owner of the bike so he gets use of it over here... he just has to let me ride his 6 when we go to SA...

cheers

Tape
That swing arm did come up good.
I thought there might have been a few holes that may have popped up when polishing and needed a bit more welding but I was wrong.

mate thanks for the call and good to see it all worked out.


mario

That looks great.!
How did you get the swingarm to come out so well. Last time I saw it, it had bits missing -)

That looks great.!
How did you get the swingarm to come out so well. Last time I saw it, it had bits missing -)

Dave, Mario is happy cos he did the welding job... sorry... the damn fine welding job.

Tim will have a contestent for the most expensive 750 kwaka soon...

cheers

Looks good Mick !

Mate, I'll do ay a straight trade...my 6 for your 3/4 litre

Nah...on second thoughts your bike will be too pretty to ride.

Is that the same bag o bones that was in my garage mate?

Farkin top marks on getting that swingarm sorted and whoever did the polishing 10/10, quick question if ya don't mind me askin whaditcostya

Plas is part owner of the bike so he gets use of it over here... he just has to let me ride his 6 when we go to SA...

cheers

woo hoo...whats mark's is mine hehehe

From a different polisher but same outstanding result.

I like it... ALOT

Attachments

Image025.jpg (60.29 KiB) Viewed 1502 times

mmmm shiny

Flash looking set of forks there mick !

got he forks seals done by

Pro-Bikes Buch St. Epping Vic. 03 9408 0605 Rob is the owner, he just opened up recently from another bloke that was in the same address.

$120 and they are not scratched up

I'll hopefully start the rebuild this weekend football finals on TV permitting...lol

cheers

Looking good Mick, can't wait to see it assembled

Matt