zx 9/12r Motor

And yourself I'd reckon!!!

your not kidding.............

...And yourself I'd reckon!!!

assume the brace position ?? Isn't that *put your head between your legs and kiss your arse goodbye ?*

as Chopper says in his video about auircraft safety........"Don't assume the position.........assume the fuckin' worst !!!........"

what about if you put the motor in a trailer and towed it behind the bike

ur just full of brilliant idea's, rnt u buddy

it has been done. i've seen a picture of a turbo'd, zx12'd, zx9r. It was a crazy looking thing. there must be info about it on the net. this thing had the standard zx9 fairings on it so i've no idea what mods had been done to the frame underneath the fairings. i think it is in the UK.

from memory it is red with an extended swingarm...

have you googled it?

If the zx9 motor fits in the zx7 and the zx12 motor fits in the zx9 does that mean someone could do a zx7/12?

no, dont give people like me ideas bad enuff that i want to do the 9 conversion

Would it be easy to put nitrous on it??? Can you post links if you know of them or let me know if you have tried and succeded in doing this.

My brother has an online shop that sells anything to do with bikes. The website is:

http://www.cyanideracing.com.au/

If the zx9 motor fits in the zx7 and the zx12 motor fits in the zx9 does that mean someone could do a zx7/12?

dead right mate, I am astonished it hasn't already been done.......

and you know, I am sure that in one of the very early Pommie reviews of the ZX7R, the 'techincal' section referred to the 7 motor being a 'developed' version of the ZX6 motor.........with the same external specifications !! (You know what a bunch of anoraks the pommies are.. )

so logically, a 12 motor should be OK to fit into a ZX6 frame, with little or no other modifications.......

can't wait to see the first one appear in 'Streetbike'

If the zx9 motor fits in the zx7 and the zx12 motor fits in the zx9 does that mean someone could do a zx7/12?

dead right mate, I am astonished it hasn't already been done.......

and you know, I am sure that in one of the very early Pommie reviews of the ZX7R, the 'techincal' section referred to the 7 motor being a 'developed' version of the ZX6 motor.........with the same external specifications !! (You know what a bunch of anoraks the pommies are.. )

so logically, a 12 motor should be OK to fit into a ZX6 frame, with little or no other modifications.......

can't wait to see the first one appear in 'Streetbike'

Hrmmm.. Maybe greg would like to combine bikes.

My frame, we'll glue his fairings on, and his motor..

so logically, a 12 motor should be OK to fit into a ZX6 frame, with little or no other modifications.......

logical thinking.

...and i'm "suuuuuuuuuuuuuuuure" the zx6 was develiped from the zx2! so then, why not a zx2/12??? theres no substitue for cubes, therefore what could be better that a 600% capacity increase. obviously it'd need a turbo and nitrous.

zedx, heres some nitrous links:
http://www.tuninglinx.com/html/nitrous- ... ing-2.html
http://www.muzzys.com/ZX10/ZX10DryNitrous/index.html
http://www.mpsracing.com/products/MPS/no01.asp

now wouldnt that be a rocket.

a zx12 engine in a zx2 frame. might have to beef up the rear tyre tho.

who wants to donate a zx2 and a zx12 to some forum testing

12R engine, does the mounting points look simular to a 9R?

The head on it is huge, how does that compare?

I found someone from the US who has a zx9r with a zx12r motor in it + turbo it has just under 260 hp , now that would be alot of fun





http://www.turbo-bike.com/Kawasaki%209-12.html

Here are some photos of a zx9 / zx12 motor + turbo. It looks like he had to cut the frame a bit i don't know if i want to do that.