250A: Oil Types and Filters! HELP!

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

Postby TRD_Supra » Sun Feb 26, 2006 4:31 pm

lol i never really bothered to find out, but to fill the bike with oil, does it go into the right hand side near the rear brake pedal, basically where the clutch cable connects onto ?
TRD_Supra
Newbie
 
Posts: 35
Joined: Thu Feb 16, 2006 2:58 pm

Postby circlework » Sun Feb 26, 2006 4:35 pm

TRD_Supra wrote:lol i never really bothered to find out, but to fill the bike with oil, does it go into the right hand side near the rear brake pedal, basically where the clutch cable connects onto ?


have you got a manual yet. if you do it will show you where everything is.
Check out my web page for some pics
Image
circlework
KSRC Member
KSRC Member
 
Posts: 126
Joined: Tue Feb 21, 2006 6:26 pm
Location: Eltham, Mlebourne

Postby TRD_Supra » Sun Feb 26, 2006 4:47 pm

i do have the manual its fora 250C tho and its a photo copy so its hard to tell WTF is going on, also is the oil gauge under the fearing cause i can't find that at all!!!
TRD_Supra
Newbie
 
Posts: 35
Joined: Thu Feb 16, 2006 2:58 pm

Postby AussieGuy » Sun Feb 26, 2006 9:27 pm

...
Last edited by AussieGuy on Mon Feb 27, 2006 10:04 am, edited 1 time in total.
Image
AussieGuy
Newbie
 
Posts: 36
Joined: Tue Feb 21, 2006 1:34 am
Location: Mexico

Postby AussieGuy » Sun Feb 26, 2006 9:28 pm

AussieGuy wrote:
i just got mine serviced (zx2rA) and he used some Shell sx4 and a H1013 oil filter dunno the brand. cost me $230.00 all up.


Damn... I pay $130 for the same oil and filter at my service shop. The guy at Top Tune even checks all my bikes fluids, brakes and chain.

BTW my first car was a Toyota Supra... Not a bad car.
Image
AussieGuy
Newbie
 
Posts: 36
Joined: Tue Feb 21, 2006 1:34 am
Location: Mexico

Postby TRD_Supra » Mon Feb 27, 2006 8:20 am

supra's are alright ey! mine was purely a speed machine, it was an 84 model (MA61) with a newer 3L Turbo dropped in (7MGTE) with an aftermarket ECU, exhuast, injectors, filter, lots of boost!! it could even beat most 250's !!!
TRD_Supra
Newbie
 
Posts: 35
Joined: Thu Feb 16, 2006 2:58 pm

Postby TRD_Supra » Mon Feb 27, 2006 10:33 am

ok i have another question now!! the bike manual says it needs an oil grade of either... SE, SF or SG, but the oil i bought is a Repsol oil with Honda spec written on it, but its graded as an SJ.. so should i take it back and get an appropriate grade or will the SJ be fine to use ? cause its oil i bought from a bike only shop!
TRD_Supra
Newbie
 
Posts: 35
Joined: Thu Feb 16, 2006 2:58 pm

Previous

Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 11 guests