How to show my noobieness...if that is indeed a word...

General Discussion

Postby Gosling1 » Sun Jan 29, 2006 9:54 pm

wazza1234 wrote:.... One that was in it was 6Ah and the one specified is 8Ah. Not a lot of difference but enough to stop it from starting if its even slightly flat.


absolutely !! thats a 25% reduction in amp-hour capacity right from the word go.....I think once you get the correctly-rated battery fitted, your problems *should* dissappear.........

:D
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Postby Neka79 » Mon Jan 30, 2006 7:28 pm

Gosling1 wrote:If the voltage across the terminals doesnt change at all (or even drops), your regulator is stuffed, buy a new one. You will also need to check the stator output if this is the case, there are a number of possible things that can go wrong here........

Good luck :D

if the voltage DOESNT increase id say theres a good chance the stator isnt charging...if the charge is too high ussually means the voltage reg is fukd....then again the reg could b filtering out too much charge....
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Postby wazza1234 » Mon Jan 30, 2006 9:15 pm

neka79 wrote:if the voltage DOESNT increase id say theres a good chance the stator isnt charging...if the charge is too high ussually means the voltage reg is fukd....then again the reg could b filtering out too much charge....


New battery installed today...what a bloody pain in the arse to fit!!!! it was heaps bigger than the old one (physical size...and amperage). The old one was so small they had to put in a giant rubber spacer so it didnt rock about in the battery compartment. Took that out and fitted like it was always meant to be there....however, the negative terminal was a bitch to get on....lead was only *just* (with some gentle encouragement) long enough. Took it for a strap...no miss!!!!! Hell yeah!!! No loss in ignition when throttle is part on but close to off....bloody excellent!!! I am stoked...now to defeat this cold and let my bruises heal from the push start ordeal :)
User avatar
wazza1234
KSRC Member
KSRC Member
 
Posts: 243
Joined: Sun Dec 11, 2005 3:56 pm
Location: Toowoomba, QLD
Bike: ZZR250
State: Queensland

Postby Neka79 » Mon Jan 30, 2006 9:51 pm

hahaha good news mate ....glad problem is fixed..had u said 2 pages ago (the battery is 25% smaller than the one its meant to have" i reckon we would of laughed at u from the get go....
good to hear its fixed...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Postby Gosling1 » Mon Jan 30, 2006 9:53 pm

:D good work, glad to hear its all running well again........

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Postby bonester » Mon Jan 30, 2006 10:09 pm

Battery in my ZZR is smaller than rated capacity- only by an Amphour or two- works well buit keeps going flat coz I don't ride it anymore.... :oops:
Pity about that. BTW my Virago can sit for months and the battery still works...not so the ZZR, even with the original battery. :x
2 X ZRX1200R 4 X ER6N, GT550, 1988 ZX-10, 4 X GPZ250R, 4 X GPZ900R and GPZ750R :) Yeah I like Kawasakis.
bonester
KSRC Contributor
KSRC Contributor
 
Posts: 2075
Joined: Sun Apr 17, 2005 1:00 pm
Location: Toowoomba/Ipswich Queensland

Previous

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 17 guests