Page 1 of 2
0 to 200 in 11.500
Posted:
Mon Jan 16, 2006 5:03 pmby diesel
went to the drags friday night.
it was good.
best pass of 11.500 at 125mph.
2.01 sec 60 footer.
happy me.
Posted:
Mon Jan 16, 2006 5:09 pmby Gosling1
Good work mate !! That is a very respectable time for a streeter......
Posted:
Mon Jan 16, 2006 6:44 pmby red_dave
Top stuff Vince...
Well done
Posted:
Mon Jan 16, 2006 6:49 pmby Stereo
How do you go to the drags? I wanna do that one day...
Posted:
Mon Jan 16, 2006 7:17 pmby photomike666
Every friday night at calder park, $55 to compete, $20 to watch according to the radio add.
Posted:
Mon Jan 16, 2006 7:45 pmby aardvark
Since when did you get Neka to do your ride reports?
Re: 0 to 200 in 11.500
Posted:
Mon Jan 16, 2006 8:10 pmby Smitty
diesel wrote:went to the drags friday night.
it was good.
best pass of 11.500 at 125mph.
2.01 sec 60 footer.
happy me.
Vin
thats a top60foot time ..that would beat lots
but then?????
you miss a gear or what...???
the 9r should be 11sec dead material
Posted:
Tue Jan 17, 2006 9:58 amby icebreaker
Hanging to go... I wanna run against the 9
Def. won't be dropping it in the trailer though
Posted:
Tue Jan 17, 2006 10:18 amby javaman
$55 seems reasonable.
Is it fun to ride on a straight line ? How fast is it by the end of the track ?
Posted:
Tue Jan 17, 2006 10:26 amby icebreaker
wel he crossed the line doing 125mph... i'm guessing he had to start braking not long after that...
Posted:
Tue Jan 17, 2006 10:45 amby javaman
But 125mph is only 200kph ?... Surely the 9 can do more than that (is the track too short?)
Posted:
Tue Jan 17, 2006 10:48 amby Duane
JAva,
any strip should be about 1/4 of a mile..
Posted:
Tue Jan 17, 2006 11:04 amby icebreaker
Me finks Java not understand what the Drags is..
Drag racing is standing start and crossing the line 1/4 of a mile down the strip. 1/4 of a mile being about 402 meters...
Alot of stock bikes do about 10.5-11.5 in which case 180-240 is on the money i'd say.
Posted:
Tue Jan 17, 2006 4:57 pmby Wattie
eerrrm, my Z1000 did 11.1 last a couple of weeks ago... and 122mph
you must've missed gear
my 60ft is 1.83
Posted:
Tue Jan 17, 2006 5:47 pmby SocialSecurity
madhatter was running 10.7 @ 130ish on his 97 9R, with a 1.7 60 foot time
the machine should definately be capable of a 10 second pass with a better 60 foot time and some fast shifts... and maybe a tune up