Clunking sound when shifting

General Discussion

Re: re: Clunking sound when shifting

Postby mattyv74 » Tue Sep 14, 2004 10:21 pm

Smitty1955 wrote:clunks.......
are caused by three things
1) bad gear selection or selectors
2) inappropriate power INPUT..into the power train and its effects
3) inappropriate power outputs... and its effects
ok
1)..caused by the rider ..
mismatching gear speeds and engine speeds and/or a misadjusted gear selector..either ya foot or the selector!
just make sure..there is no slop and its adjusted properly...to fit ya
foot and its movement (up or down)
and the clutch is adjusted properly...from handlebars down...
2)..can be caused by too high an idle speed (which causes a clunk specially selecting 1st)... to not backing off enuff when changing gears
In other words..too much engine or power input keeps the tension on the drive train...which will give a clunk when you release the tension (by pulling in the clutch)
(3)
caused by a worn input (primary)chain..which is VERY unlikely
or a bad adjusted (too tight or too loose) drive chain or a misaligned rear wheel....or stuffed Damper,Rear Hub Shock (as the yanks call it or Cush drive to us...) or worn swing arm connections (bearings etc)

most likely???
chain misadjusted..too loose I guess...
or misadjusted selector mechanism
with a tad too high carby setting...

btw
every bike i have had...from spewzuki Ts185
to MachIII to GPz750turbo..to the mighty GPx..
all had a bit of a clunk
depends on whether the 'bit' is too much


yeh, or as mentioned earlier in the thread, could just be a typically tuff Kwaka gear box. :roll:
It is far better to dare mighty things, to win glorious triumphs, even if chequered with failure, than to take rank with those who neither enjoy much nor suffer much, as they live in grey twilight that knows no victory nor defeat.
mattyv74
Team Kitty Litter
 
Posts: 658
Joined: Sun May 02, 2004 3:13 pm
Location: Toowoomba
Bike: ZX7R
State: Queensland

re: Clunking sound when shifting

Postby Nanna10r » Tue Sep 14, 2004 10:22 pm

Dear Sinsay Yoda .... You're Slipin Maaayte I give ya the big Build up and you run out some
"tree hugging pinko hippie" engineering talk WTF :shock: :shock:

"TUFF STUFF MAKES BANG NOISES"
woulda sufficed.
Second Attempt was a bit better but maayte whats the story ?????

Must be interference from having your head under Europee'in Cars all weekend messing with the " FORCE " or something.
Cheers Brett.
PS. I Wanna hear the Boobies Falling off the Waterbottle story at PI (My Shout)
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Re: re: Clunking sound when shifting

Postby Nanna10r » Tue Sep 14, 2004 10:35 pm

mattyv74 wrote:
Smitty1955 wrote:clunks.......
are caused by three things SNIP
Yada Yada YODA Yada starwars
btw
every bike i have had...from spewzuki Ts185
to MachIII to GPz750turbo..to the mighty GPx..
all had a bit of a clunk
depends on whether the 'bit' is too much


yeh, or as mentioned earlier in the thread, could just be a typically tuff Kwaka gear box. :roll:


Yoda young Matty even added to the Your Big intro but then
"he had to Carry the Ball over the line himself"
...... has the Student become the master ?????
starwars starwars starwars
I Feel a shift in the FORCE ......
Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

re: Clunking sound when shifting

Postby YAPPA » Tue Sep 14, 2004 10:50 pm

i liked the big spinny bit, gets wacked by the do hickey & the thingymajig wil go clunk type explanation as well, although any 1 of those answers would do. What a forum, ask a simple question, get several different technical & simple answers.Let it run in mate, all those sexy surfaces on those gears r only just gettin 2 know each other, but soon enuff the courting will b over & they'll b ready 4 sum hot & heavy action! :wink:, & welcome 2.
Image
YAPPA
KSRC Regular
KSRC Regular
 
Posts: 928
Joined: Wed Sep 08, 2004 8:30 pm
Location: BRISSY
Bike: ZX6R
State: Queensland

Re: re: Clunking sound when shifting

Postby Smitty » Tue Sep 14, 2004 11:00 pm

"TUFF STUFF MAKES BANG NOISES"
and then stops working...boooom..you walk!

"I Wanna hear the Boobies Falling off the Waterbottle story at PI"
she was blonde too..but I didn't marry her!
mind you, seeing her 20 years later...nearly caused a divorce
and that story, I will tell at PI
hehe


cheers
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: re: Clunking sound when shifting

Postby Smitty » Tue Sep 14, 2004 11:11 pm

mattyv74 wrote:yeh, or as mentioned earlier in the thread, could just be a typically tuff Kwaka gear box.


one problem....
not all are....they do stop working after they go bang!
so you walk!
ever tried pushing a bike jammed in gear, after you blew the box!
*doh*
and having had to rebuild a few 'boxes
yes, they (Kwaka boxes)are good but not perfect
I have never found one that is
so
we take an intelligent approach ..to fixing what we got! :D
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: re: Clunking sound when shifting

Postby Smitty » Tue Sep 14, 2004 11:27 pm

YAPPA wrote:i liked the big spinny bit, gets wacked by the do hickey & the thingymajig wil go clunk type explanation as well,


aaaah..now I see
you blokes like simple answers....
well how about this one....?
the doodad when pushed, connects with the widget
which places force on the arblaster (which is part of the
whole darn thingy) which makes the whosamajiggy thing
go fark..it can't do that, so a CLUNK takes place....

is that spatial enuff????
and may the force be with you........ :lol:
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

re: Clunking sound when shifting

Postby Nanna10r » Tue Sep 14, 2004 11:31 pm

Yoda ... Ian ... Smithy ... Mayyyte. Calm down ... settle ... breath in .... ok that better ... good.
I didnt say Young Matty had replaced the master ..... Heavens FORBID.
That could be Catastrophic, apocalyptic, Unfathomable 'n pretty bloody ordinary as well.
Mate But
BANG DONT MEAN BROKE can do but dont

I mean when i was a Boy I WAS CONVINCED that the Big Bang theory referred to My older Brother, A Pristine GPZ1100B(Red of Course), A Bottle of Panthers Piss, A Brunette, A Blanket and a 6 pack of Frangers ??????.

So it's all good, BANG AINT BAD, Can be but Aint......
Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

re: Clunking sound when shifting

Postby Russell » Wed Sep 15, 2004 8:34 am

Well, I'd noticed my new beastie is awful clunky too - just over 10k kms on it now so I thought it should've been worn in by now, so I tried Marek's suggestion of preloading the lever a bit before I pull in the clutch...
Works a treat - I'm clunk free :D
I might drop the lever a bit more too so I don't have to think about preloading it as much.
2002 ZZR600
User avatar
Russell
Team ZZR
 
Posts: 85
Joined: Tue May 04, 2004 1:16 pm
Location: Hunter Valley, NSW
Bike: ZZR600
State: New South Wales

re: Clunking sound when shifting

Postby corbywan » Wed Sep 15, 2004 8:50 am

Ummm.........
can anyone say
"Kawasaki"???

How many fly buys does this earn me?? :lol:

I have heard alot of concerns with the Kawasaki gear box
but
all seems to be ok,
it's just a Kawasaki gear box.

I treated the gear box on my ZZR250 like crap
she held together nicely,
in fact she is still going (I know the owner!).
Now on my ZX6
I hear it from N-1 changes especially.
I am not too fussed by it.

Kawa GB are great 8)

Say it with me guys - *KAWASAKI*

No worries here mate :wink:
Corbywan
"ZX6R - The laws of physics want their virginity back! "
corbywan
KSRC Member
KSRC Member
 
Posts: 227
Joined: Tue May 04, 2004 5:13 pm
Location: Melbourne, VIC

Re: re: Clunking sound when shifting

Postby Smitty » Wed Sep 15, 2004 8:55 am

corbywan wrote:Say it with me guys - *KAWASAKI*
No worries here mate :wink:


huh...???
Corbeywan..the plate says KHI...not Kwiquasaki.........
hehe
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: re: Clunking sound when shifting

Postby Smitty » Wed Sep 15, 2004 9:05 am

Pontikat wrote:I mean when i was a Boy I WAS CONVINCED that the Big Bang theory referred to My older Brother, A Pristine GPZ1100B(Red of Course), A Bottle of Panthers Piss, A Brunette, A Blanket and a 6 pack of Frangers ??????....... Cheers Brett


Brett...
As the oldest (in my family), I have to tell you
it was a MachIII (never did get excited 'bout the big Gpz's)
several bottles of Abbotts lager (we did drink and ride..back then)
she was a blonde, it was a car rug...
and Durex mate...was the brand........ :lol:


and there is NOTHING wrong with my memory....
when it comes to this....
Last edited by Smitty on Wed Sep 15, 2004 9:13 am, edited 1 time in total.
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: re: Clunking sound when shifting

Postby Smitty » Wed Sep 15, 2004 9:12 am

Pontikat wrote:Yoda ... Ian ... Smithy ... Mayyyte. Calm down ... settle ... breath in .... ok that better ... good. Cheers Brett


Brett
the old master never loses it.....
it is cooooooooooooooooooooooooool.... :)
I can be as upmarket or as dirtbag, as anyone else here
an engineering intellectual or greasejockey
as the case demands
hehe

but
thank you, for your thoughts and concern anyway......
that was nice.


cheers
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

re: Clunking sound when shifting

Postby mattyv74 » Wed Sep 15, 2004 9:45 am

Judging by the number and frequency of some member's post on here, they could quite happily have their own little forum. The end result would still to be the same, as some always feel the need to both have the final word and be correct.
I think some peeps just give up on trying to discuss a point:roll:
Last edited by mattyv74 on Wed Sep 15, 2004 10:06 am, edited 1 time in total.
It is far better to dare mighty things, to win glorious triumphs, even if chequered with failure, than to take rank with those who neither enjoy much nor suffer much, as they live in grey twilight that knows no victory nor defeat.
mattyv74
Team Kitty Litter
 
Posts: 658
Joined: Sun May 02, 2004 3:13 pm
Location: Toowoomba
Bike: ZX7R
State: Queensland

Re: re: Clunking sound when shifting

Postby mattyv74 » Wed Sep 15, 2004 9:56 am

Smitty1955 wrote:I can be as upmarket or as dirtbag, as anyone else here an engineering intellectual

Hmmmm, now let me see. Three thoughts come to mind;
-An old bike and a Brighton address does not equal upmarket.
-Cant recall any red gpx doing monos or burnouts, or even leaning over very far lately
-Yep, come across the same as most intellectuals and engineers I know

Some people have just got it all. :lol:
It is far better to dare mighty things, to win glorious triumphs, even if chequered with failure, than to take rank with those who neither enjoy much nor suffer much, as they live in grey twilight that knows no victory nor defeat.
mattyv74
Team Kitty Litter
 
Posts: 658
Joined: Sun May 02, 2004 3:13 pm
Location: Toowoomba
Bike: ZX7R
State: Queensland

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 63 guests