New Vic Roads Rego requirements....

General Discussion

New Vic Roads Rego requirements....

Postby Smitty » Fri Jul 09, 2004 8:54 am

have a look at this....

http://snipurl.com/7ken

VicRoads have some new regs re placement of reg labels.....
check the link....


cheers
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

re: New Vic Roads Rego requirements....

Postby Bluefly » Fri Jul 09, 2004 10:00 am

I'm not sticking an enormous white rectangle off the side of my black bike. Been pulled over twice and been fined for other things, but not that. It's a wonder they don't want number plates stuck to the side of the petrol tank.... :evil:
Hayden who??
Bluefly
Patient 46
Patient 46
 
Posts: 578
Joined: Tue Apr 27, 2004 9:54 am
Location: Southbank, Brisbane

re: New Vic Roads Rego requirements....

Postby icebreaker » Fri Jul 09, 2004 10:02 am

Mines below my number plate.. if they don't like that they can blow me...
Ducati Monster S2R1000
Kawasaki '77 Z1000A1, '76 z900 (Project) & '78 Z1000A2 (Project)

http://www.unihost.com.au - Affordable, Reliable Webhostng
icebreaker
Administrator
Administrator
 
Posts: 2794
Joined: Wed Apr 07, 2004 7:07 pm
Location: Hobart
Bike: Z1000
State: Tasmania

re: New Vic Roads Rego requirements....

Postby Smitty » Fri Jul 09, 2004 10:09 am

I don't agree with it......what part of the LH body work on the Gpx
do they want me to drill?????
I am not going to do it......
my label holder hangs off the
bottom of the plate holder and thats where it is gunna stay
so
me............??
I will plead ignorance if plod pull me over...
what new regulation ????? :x


but I thought I would let you lot know...
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: re: New Vic Roads Rego requirements....

Postby aardvark » Fri Jul 09, 2004 11:01 am

Smitty1955 wrote:I don't agree with it......what part of the LH body work on the Gpx do they want me to drill?????


My label is on the left hand side of my bike.
Attachments
rego.jpg
rego.jpg (51.28 KiB) Viewed 6248 times
User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Location: Adelaide, S.A.
Bike: Yamaha
State: South Australia

re: New Vic Roads Rego requirements....

Postby Smitty » Fri Jul 09, 2004 11:13 am

screwed to the chain guard????
through the chain guard..???
thru a tab on the swing arm.....????
Jase
not absolutely clear.....

and can I ask why......
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

re: New Vic Roads Rego requirements....

Postby aardvark » Fri Jul 09, 2004 11:21 am

Ian,

I use the screw that came with the bike that holds on the chain guard.

Everyone (well nearly) over here does it this way.
Attachments
rego1.jpg
rego1.jpg (37.55 KiB) Viewed 6241 times
User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Location: Adelaide, S.A.
Bike: Yamaha
State: South Australia

re: New Vic Roads Rego requirements....

Postby Smitty » Fri Jul 09, 2004 11:33 am

righto Jase....
thanks for that...
absolutely clear now.......
even if your label is unreadable...................... :lol:
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

re: New Vic Roads Rego requirements....

Postby Bluefly » Fri Jul 09, 2004 11:47 am

South Australian's obviously have no taste then.....
Hayden who??
Bluefly
Patient 46
Patient 46
 
Posts: 578
Joined: Tue Apr 27, 2004 9:54 am
Location: Southbank, Brisbane

re: New Vic Roads Rego requirements....

Postby aardvark » Fri Jul 09, 2004 11:59 am

Ian, it IS winter.... besides, the label is 3 months old. The new one is sitting on my desk. :lol:

Bobbi, I've often wondered why people go to all the trouble to hack up their rear mu guard, and then dangle a rego label off the bottom of their plate??? At least mine is out of the way and not flapping around in the breeze ruining the appearance of the bike.

Heck, next you guys will have number plates on the front of your bikes aswell!!
User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Location: Adelaide, S.A.
Bike: Yamaha
State: South Australia

re: New Vic Roads Rego requirements....

Postby icebreaker » Fri Jul 09, 2004 12:41 pm

I believe their working on it.... *curses*
Ducati Monster S2R1000
Kawasaki '77 Z1000A1, '76 z900 (Project) & '78 Z1000A2 (Project)

http://www.unihost.com.au - Affordable, Reliable Webhostng
icebreaker
Administrator
Administrator
 
Posts: 2794
Joined: Wed Apr 07, 2004 7:07 pm
Location: Hobart
Bike: Z1000
State: Tasmania

Re: re: New Vic Roads Rego requirements....

Postby Smitty » Fri Jul 09, 2004 1:06 pm

aardvark wrote:Heck, next you guys will have number plates on the front of your bikes aswell!!


and Jase, if we get 'em ........so will you.............. :(
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: re: New Vic Roads Rego requirements....

Postby Smitty » Fri Jul 09, 2004 1:13 pm

aardvark wrote:Bobbi, I've often wondered why people go to all the trouble to hack up their rear mu guard, and then dangle a rego label off the bottom of their plate???


hack off..???
nothing to hack off.....
the GPx750r has one of the nicest rear ends......there is no long guard
or mudflap hanging down.....
so it is a very good spot to put the plate....and the reg label.......
don't know about you blokes...... :roll:
Attachments
DSC00237GPX_toyrun.JPG
DSC00237GPX_toyrun.JPG (125.79 KiB) Viewed 6220 times
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

re: New Vic Roads Rego requirements....

Postby icebreaker » Fri Jul 09, 2004 1:36 pm

It's only because the number plate is bolted on dead center at the bottom.. So you use that bolt for the rego sticker... the ZX6 is the same..
Ducati Monster S2R1000
Kawasaki '77 Z1000A1, '76 z900 (Project) & '78 Z1000A2 (Project)

http://www.unihost.com.au - Affordable, Reliable Webhostng
icebreaker
Administrator
Administrator
 
Posts: 2794
Joined: Wed Apr 07, 2004 7:07 pm
Location: Hobart
Bike: Z1000
State: Tasmania

RE: New Vic Roads Rego requirements....

Postby troyh78 » Fri Jul 09, 2004 1:39 pm

pictures please? the mudguard sounds like a good place to hide it...


Post generated using Mail 2 Forum (Posted to Forum Via Email)
troyh78
Warming up
Warming up
 
Posts: 50
Joined: Fri May 14, 2004 10:47 am
Location: nsw, australia

Next

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 59 guests