CHEAPEST EXAUST

General Discussion

re: CHEAPEST EXAUST

Postby red_dave » Fri Jun 03, 2005 12:03 pm

Yankee's exhaust should fit but the one's off the 03/04 models won't without some modifications...
Image
User avatar
red_dave
Team Kuda
Team Kuda
 
Posts: 7973
Joined: Thu Oct 07, 2004 12:47 pm
Location: Dodgy BrisVegas
Bike: ZX6R
State: Queensland

re: CHEAPEST EXAUST

Postby mile636 » Fri Jun 03, 2005 12:19 pm

I just spoke to exhaust pro's at slacks creek and I might get my existing pipe re-skinned as it would only cost me $90-130. They also quoted me $570 for replacement sports muffler. I think that's expensive...

Can they make the muffler slightly louder if I wanted that?
mile636
Warming up
Warming up
 
Posts: 82
Joined: Thu Jun 02, 2005 11:16 pm
Location: Brisbane

re: CHEAPEST EXAUST

Postby Yankee » Fri Jun 03, 2005 12:24 pm

same exact pipe between the two! :wink: (as far as i can find out!)
i was also thinking, i could swap you mine for yours... plus about $200...
that'd make it easy for you! then your done and i can worry about the scratched pipe....
just cuz the "new slip cover" that the ppl at the exhaust joint do for you won't have the "K" and associated etchings!!!
let me know!!
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

re: CHEAPEST EXAUST

Postby ttc » Fri Jun 03, 2005 12:28 pm

$570 for an aftermarket pipe is about average I'd say..
I know my yoshi is worth about $800 so sounds about right..
If all you're doing is fixing it so the scratch is gone, just get it reskinned :)

And i'd say they could make it louder but prob cost more money :(
Image
User avatar
ttc
Team Black
 
Posts: 2893
Joined: Fri Nov 19, 2004 2:59 pm
Location: Brisbane
Bike: Z1000
State: Queensland

re: CHEAPEST EXAUST

Postby mile636 » Fri Jun 03, 2005 1:27 pm

I know what you mean yankee, and I'll let you know if I decide to the deal with you.

I am new to this forum and I am suprised and happy with everybody's help. So thanks everyone.

Much appreciated

Mile636

PS. When i buy a new bike it will be a z1000 or z750 :)
mile636
Warming up
Warming up
 
Posts: 82
Joined: Thu Jun 02, 2005 11:16 pm
Location: Brisbane

Re: re: CHEAPEST EXAUST

Postby YAPPA » Fri Jun 03, 2005 3:01 pm

[quote="tanyathecheeky"]Yep Yankee's is a poorer cousin (hahah) and only a 600 :P

quote]

Marty's got a poverty pack, Marty's got a poverty pack, Marty's got a poverty pack...........sorry marty, couldn't let that chance go by :lol: :lol: :lol: just jokes bloke :wink:
Image
YAPPA
KSRC Regular
KSRC Regular
 
Posts: 928
Joined: Wed Sep 08, 2004 8:30 pm
Location: BRISSY
Bike: ZX6R
State: Queensland

re: CHEAPEST EXAUST

Postby Neka79 » Sat Jun 04, 2005 12:47 am

if u re-skin the current pipe without the etchings etc, it will look like its been dropped....why would ne1 fix a stock can??
u wouldnt get more for a bike with a aftermarket can, then again it might deter sum1 from buying it...dunno why? ive always been told (and yes i wasa bike salesman) its MUCH easier to sell a stock bike than a modded bike...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

re: CHEAPEST EXAUST

Postby mile636 » Mon Jun 06, 2005 2:43 pm

That makes sence.

I had a look at the reskinned muffler and it doesn't look good at all.
In that case I will either buy another genuine muffler for about $150 - 200 or get an aftermarket one for whatever they cost.

If I was to buy an aftermarket one, how much would the cheapest one be and where from????

Thanks again

Mile636
mile636
Warming up
Warming up
 
Posts: 82
Joined: Thu Jun 02, 2005 11:16 pm
Location: Brisbane

re: CHEAPEST EXAUST

Postby Neka79 » Mon Jun 06, 2005 11:36 pm

staintune is abt $620 ish id reckon..tho if u can get in there (are u in nsw??) u can buy one at the factory for abt $500.....dunno wot else is cheaper...
the factory is in nsw,mittagong..near bowral...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

re: CHEAPEST EXAUST

Postby mile636 » Mon Jun 06, 2005 11:48 pm

I'm in Brisbane...

I thought you can get an aftermarket can for about $400-500...

I might try calling staintune and see if they can post it...

Cheers
mile636
Warming up
Warming up
 
Posts: 82
Joined: Thu Jun 02, 2005 11:16 pm
Location: Brisbane

re: CHEAPEST EXAUST

Postby Yankee » Tue Jun 07, 2005 8:21 am

yeah, i've been looking for deals left-right-and-center, cuz i was also under the impression that i should be able to get a metal pipe for the bike less than $500... but, uh, i haven't found a pipe maker that is willing to let go of a round piece of metal for less than $600!!! and normally those are shyte-house.....
hence, i still have the stock! i troll e-bay a lot.....
one day!
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

re: CHEAPEST EXAUST

Postby Neka79 » Tue Jun 07, 2005 11:56 pm

call Adam at staintune...02 48713188 ..tell him neka said to call and see if he could do u a deal...they are 100% aussie made & owned, have a good warranty, fully s/s, even the internals...
i use to work there, and bought the blade off Adam (was his personal/race bike)...
oh, and tell him he DIDNT win the bet..i lasted 2 yrs before i binned it...lol...i think his bet was 4 weeks...lol
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

re: CHEAPEST EXAUST

Postby Yankee » Wed Jun 08, 2005 7:24 am

uh Neka... we want a 'deal' not for him to say something like: "you know Neka?!.. GET THE HELL AWAT FROM ME AND MY STAFF!!!!"

haha!!!

actually i'll take you up on that offer mate... cheers!
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

re: CHEAPEST EXAUST

Postby the kid » Wed Jun 08, 2005 8:26 am

Im with Neka (strange but true) The stock look is better for purchasers . I looked at bikes to buy 2nd hand and all the signs of mods said to me "its been flogged/raced" May not be true but anything aftermarket was not as appealing as Box Stock . The nine I bought was untouched and I was happier to pay more for it than another that had carbon undertray , nice pipe and a rack . This guy had the stock pipe too ! Just that my head was going to be happier . The buyer always thinks they are going to be ripped so I went with the more Honest bike . You wont get your money back for the aftermarket pipe . Show a buyer the scratched pipe and show em that the fairing is undamaged and never repaired , then let them but an after market pipe . They will be happier that you were honest with them . Just my 2 bobs worth . Good luck .
User avatar
the kid
KSRC Addict
KSRC Addict
 
Posts: 3948
Joined: Thu May 12, 2005 5:10 pm
Location: Bendigo
Bike: Yamaha
State: Victoria

re: CHEAPEST EXAUST

Postby mile636 » Wed Jun 08, 2005 2:58 pm

Hey Neka, I called up Staintune the other day before you posted your msg. They said they don't sell direct to public anymore...

However, If you can call Adam at Staintune and ask him to do a deal for me (and Yankee maybe) than I can call him to arrange that. I'm in Brisbane (so is Yankee) so we would have to arrange postage...
mile636
Warming up
Warming up
 
Posts: 82
Joined: Thu Jun 02, 2005 11:16 pm
Location: Brisbane

PreviousNext

Return to General Discussion

Who is online

Users browsing this forum: No registered users and 12 guests

cron