Switch to full style
General Discussion
Forum rules
Post a reply

rubber grommets

Wed Sep 14, 2005 9:19 pm

Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!! :)

Wed Sep 14, 2005 9:27 pm

try your nearest boat and marine retailer. they should be using them to run wires in alloy boats.

Wed Sep 14, 2005 9:43 pm

If you mean a solid rubber blanking plug, just drop into your local Commodore wreckers and grab one of the rubber plugs that fit into holes in the boot - drainage plugs I think ? they are very close to 25mm across.

cheers
RubberBootButtPlugDave

Re: rubber grommets

Wed Sep 14, 2005 9:58 pm

Simmo_ZX9R wrote:Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!! :)
Mate go to purple pig in mcintyre rd sunshine. or rare spares in gilbert rd preston.

Re: rubber grommets

Wed Sep 14, 2005 10:04 pm

Simmo_ZX9R wrote:Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!! :)


Simmo
Repco (and autobarn i think)
sell lil' packs of grommets
from about 5mm up to 32mm
cost me $6 a few years for the pack with about 10 grommets
in it
take ya pick from 'blanking' grommets (no hole)
or wiring/harness ones (mit hole)


cheers

Wed Sep 14, 2005 10:06 pm

Goose one of your best heheheheheheheeee;
Cheers Brett

Wed Sep 14, 2005 10:23 pm

:lol: *takes a bow* :lol:

Sun Oct 30, 2005 6:26 pm

Take apart the glass bong and use that....

Sun Oct 30, 2005 8:05 pm

of course, you mean the rubber foot eh ????? but then you would have dirty billy water all over the place uurrgrgghhhh and we all know how bad that smells :x :x :x

Sun Oct 30, 2005 8:24 pm

you could try off ya tree ;P

Sun Oct 30, 2005 8:36 pm

Shit I guess I will have to do this too.....

I hate effort. :roll:

Re: rubber grommets

Tue Nov 01, 2005 10:03 pm

Simmo_ZX9R wrote:Please help...
Gotta drill a hole in the belly pan of the bike about 20-25mm in size to meet GCR's...now l know how to drill the hole but you guys got any suggestions as to where l would get some blank grommets to fit the 20-25mm hole??
Any info is appreciated!!! :)

If all else fails let me know your address and I will mail you the one I found in the shed this arvo...

...gotta love Melbourne Cup holidays 8)

Couldn't give a stuff about the horse race though, I just like the day off. It's not a public holiday up here either, so the shops are open. Given I only get 3 hours on a Saturday to do all the local shopping this is a bonus.

Wed Nov 02, 2005 11:21 pm

Just threw a Valiant item in mine today. Works great!
Post a reply