Page 1 of 1

2012 650R Products

PostPosted: Tue Aug 28, 2012 7:56 pm
by young1
Hi all ....have noticed in the last cple of wks 2012 ninja 650 after market products have started hitting ebay ie: exhaust, windshields & bar ends e.t.c.

Re: 2012 650R Products

PostPosted: Tue Aug 28, 2012 9:53 pm
by Mothy
Couple of web sites i have found usefull for the 2012 Ninja 650

Radiator Gaurd & Levers - http://www.radguard.com.au/
Exhaust - http://www.revzilla.com/sportbike-gear - USA, fast delivery, 5 business days
Pazzo Levers - http://www.pazzoracing.com/ - Canada, very fast delivery, 3 business days
Rear Swing-arm bobbins, bar-ends, fender eliminator - http://www.evotech-performance.com/ - UK, fast delivery, 5 business days

I have purchased items from all the above sites with no problems at all.

Another helpful site is - http://www.ninja650shop.com/ - although i haven't purchased any thing from these guys so can't give any advice.

I am trying to find infill panels for the plastics around the rear seat so that i can get rid of the heavy handles that never get used. If anyone has any ideas please let me know.

Cheers.

Re: 2012 650R Products

PostPosted: Wed Aug 29, 2012 10:03 am
by young1
Nice 1 on the above links mothy I'll suss em
I've used Pro-Bolt 2 who r good www.probolt-australia.com. Don't no about infill panels.
I reckon with the pillion handles u could probably unscrew them & take them off, Use the same size thread if u don't want to see the head fill the holes with expoxy resin (leave a Cple of .mil 4 expansion) tubes from the surf shop 4 $15, give it a gentle sand with some fine wet/dry paper (use soaked) then touch up with enamel spark black available not sure about green. Rear seat cowl & yr sorted!!
If u eventually get yourself a girlfriend get yourself a older model rear seat with the strap.

Re: 2012 650R Products

PostPosted: Tue Jan 22, 2013 9:37 am
by wendyh
Hi
New to this forum.
I have a ninja 650R which I recently crashed....anyone know where I can get rearsets for this model,
or know if the American ones fit please?

Re: 2012 650R Products

PostPosted: Tue Jan 22, 2013 5:18 pm
by Six Addict
Hey Wendy! Anything from America labelled as a 650R will fit an Aussie bike. Exactly the same. Hope this helps :D

Re: 2012 650R Products

PostPosted: Tue Jan 22, 2013 5:41 pm
by tim
wendyh wrote:Hi
New to this forum.
I have a ninja 650R which I recently crashed....anyone know where I can get rearsets for this model,
or know if the American ones fit please?


Try Kaneg.com.au if you want some quality aussie supplied and supported rearsets, he's a site sponsor and all round nice guy ;)