Kawasaki Sportsbike Riders Club - Australia - Online Forum

Posted: **Thu Dec 24, 2009 2:30 pm**

I did a quick search and couldn't find anything else posted so here goes.

Has anyone else heard about this one? I went into CMC at Fyshwick this morning just to check, since I hadn't received a letter from Kawasaki yet. Turns out my bike is one of the ones on the recall list for a suspect oil leak on to the rear wheel. Glad I did go and check it out though. I wouldn't have known at all but the fella in at the bank this morning mentioned there was a recall on the 2010 models. Well I can confirm it's not just the 2010 model - http://www.recalls.gov.au/content/index ... mId/971208

Posted: **Thu Dec 24, 2009 3:35 pm**

Kawasaki—Models EX250J9F, EX250JAF and EX250JAFA Motorcycles—Porosity in the aluminium casting
PRA number: 2009/11306
Date created: 18th December 2009
Product information
Product description
The motorcycles were imported between August 2009 and December 2009.
Identifying features
Models EX250J9F, EX250JAF and EX250JAFA
Campaign number: DAC581A/2A
Target number: 972
What are the hazards?
Vehicle malfunction
What are the defects?
Some of the upper engine cases in the affected model range may have porosity in the aluminium casting. This porosity occurs in the vicinity of a pressurised oil passage just above the transmission output shaft. Engine oil leaking from this location may be deposited on the rear tyre, creating the potential for an accident to occur.
Where the product was sold

* National

Supplier
Kawasaki Motors Pty Ltd
What should consumers do?
Contact your Kawasaki dealer.

Posted: **Thu Dec 24, 2009 5:50 pm**

Link no worky

Kawasaki Sportsbike Riders Club - Australia - Online Forum

Time for a recall

Time for a recall

Re: Time for a recall

Re: Time for a recall