zx12 boat anchor

ZX2R, ZXR400, ZXR750, ZX6R, ZX7R, ZX9R & ZX12R & others.

zx12 boat anchor

Postby Rumbles » Wed Dec 02, 2009 8:02 pm

R.I.P 05ZX12R
managed to blow a hole about 3cm by 5cm out the front of my motor on saturday, she went off with a bang and a cloud of smoke. :cry: :cry:
on the up side it still ran, how i dont know, but i managed to get it home looking like a steam train as it smoked the whole way there. luckily it happened about 4km from home at the end of a poker run.
Rumbles
KSRC Member
KSRC Member
 
Posts: 133
Joined: Sat May 05, 2007 3:44 am
Location: leeton

Re: zx12 boat anchor

Postby Smitty » Wed Dec 02, 2009 8:09 pm

Rumbles wrote:R.I.P 05ZX12R
managed to blow a hole about 3cm by 5cm out the front of my motor on saturday, she went off with a bang and a cloud of smoke. :cry: :cry:
on the up side it still ran, how i dont know, but i managed to get it home looking like a steam train as it smoked the whole way there. luckily it happened about 4km from home at the end of a poker run.


a hole...??
as in the radiator, as in the engine block? head? crankcase?? busted hose??? oil cooler?

most peculiar
more info please
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10910
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: zx12 boat anchor

Postby Gosling1 » Wed Dec 02, 2009 8:21 pm

Given the floggings that old mate has mentioned in the past, my guess would be that he has lunched a crank, and spat a hole in the front of the block through the radiator......just a wild guess though....

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: zx12 boat anchor

Postby Smitty » Wed Dec 02, 2009 8:25 pm

Gosling1 wrote:Given the floggings that old mate has mentioned in the past, my guess would be that he has lunched a crank, and spat a hole in the front of the block through the radiator......just a wild guess though....

8)


and he rode it home...........???
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10910
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Re: zx12 boat anchor

Postby Gosling1 » Wed Dec 02, 2009 8:30 pm

yeh, seen it done before......a mate of mine lunched a CB750/4 crank once, blew a hole out the front of the motor ( and half a piston and rod) - it actually caught fire as he continued to ride along :lol: :lol: but after a couple of k's, the fire blew out :shock: - he made it home ( another k or 2 ) as the engine was finally seizing up from loss of oil. Probably less than 4 k's from where he lunched to home ??

The crank still spun freely, because it only had <1/2 a rod hanging off the buggered big-end, so it wasn't actually 'hanging-up' on anything as it spun around ......the other 3 cylinders kept firing.......bloody funny to watch !!

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: zx12 boat anchor

Postby Rumbles » Thu Dec 03, 2009 2:46 am

Gosling1 wrote:Given the floggings that old mate has mentioned in the past, my guess would be that he has lunched a crank, and spat a hole in the front of the block through the radiator......just a wild guess though....

8)

thats pretty close to the mark only didnt damage the radiator, the chunk out of the block must of hit the exhaust. No. 3 cylinder obviously didnt like what was going on.
will put some photos up once i pull it down
Rumbles
KSRC Member
KSRC Member
 
Posts: 133
Joined: Sat May 05, 2007 3:44 am
Location: leeton


Return to ZX-R Older Model Discussion

Who is online

Users browsing this forum: No registered users and 7 guests