How far CAN you lean a 12 ?

ZX2R, ZXR400, ZXR750, ZX6R, ZX7R, ZX9R & ZX12R & others.

How far CAN you lean a 12 ?

Postby frog » Tue Oct 14, 2008 9:22 am

I have previously posted pics of wind down shots from QR and we have all seens scrapes under the fairings of 12's especially around the pipe exit but I submit a new lean angle limit for the mighty 12R... I know, I know pics or it didnt happen. :roll:
Image

Sorry I didnt catch up to you at the GP Goz, the free piss and food was just too much and my phone died one day into the trip :cry:
Jedi of the darKside
Just because you can ride, doesnt mean you should. My reason on this earth is an example to others what NOT to do.
User avatar
frog
KSRC Member
KSRC Member
 
Posts: 202
Joined: Mon Jun 30, 2008 6:28 am
Location: Rockhampton
Bike: ZX12R
State: Queensland

Re: How far CAN you lean a 12 ?

Postby binther » Tue Oct 14, 2008 1:20 pm

lol i think there is different between a drop and a lean :P
binther
Warming up
Warming up
 
Posts: 62
Joined: Tue Jul 08, 2008 4:20 pm
Bike: GPx250
State: Queensland

Re: How far CAN you lean a 12 ?

Postby JetPilot » Tue Oct 14, 2008 1:45 pm

binther wrote:lol i think there is different between a drop and a lean :P


I think Binther is on to something. Did you scrape both knee sliders, elbows, head, etc.... :lol: :lol:
Attachments
grindoe1.jpg
grindoe1.jpg (30.6 KiB) Viewed 3846 times
Kawasaki Z1000r 2012
User avatar
JetPilot
KSRC Contributor
KSRC Contributor
 
Posts: 2455
Joined: Tue Dec 05, 2006 6:15 pm
Location: The Shire
Bike: Z1000
State: New South Wales

Re: How far CAN you lean a 12 ?

Postby hoffy » Tue Oct 14, 2008 9:53 pm

That is a fuckin brave effort !

I know the 9's scrape engine cases, ala madkaw at track, but I have not heard of the 12's doing it before..
hoffy
Team Barge
Team Barge
 
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Re: How far CAN you lean a 12 ?

Postby Wattie » Wed Oct 15, 2008 5:52 am

JetPilot wrote:
binther wrote:lol i think there is different between a drop and a lean :P


I think Binther is on to something. Did you scrape both knee sliders, elbows, head, etc.... :lol: :lol:



i think the "coolant" is water, seeings how the bike is filthy from riding in the rain.

if it had crashed i reckon there'd be scrapes going upwards, not just horizontal.

need the full pic frogsta 8)
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: How far CAN you lean a 12 ?

Postby binther » Wed Oct 15, 2008 12:27 pm

haha well maybe he just layed it down real slow... and it keep going straight.. or what ever hahaha who knows aye :)
binther
Warming up
Warming up
 
Posts: 62
Joined: Tue Jul 08, 2008 4:20 pm
Bike: GPx250
State: Queensland

Re: How far CAN you lean a 12 ?

Postby JetPilot » Wed Oct 15, 2008 12:42 pm

Wattie wrote:
JetPilot wrote:
binther wrote:lol i think there is different between a drop and a lean :P


I think Binther is on to something. Did you scrape both knee sliders, elbows, head, etc.... :lol: :lol:



i think the "coolant" is water, seeings how the bike is filthy from riding in the rain.

if it had crashed i reckon there'd be scrapes going upwards, not just horizontal.

need the full pic frogsta 8)




I realise all that mate, just having a digg Wattie. :roll:
That's bloody impressive to get a barge over that hard and scrape covers Frog. 8)
The only other time I sore scrapes like that was on Scotts 12 out the creek... turn 2.
Kawasaki Z1000r 2012
User avatar
JetPilot
KSRC Contributor
KSRC Contributor
 
Posts: 2455
Joined: Tue Dec 05, 2006 6:15 pm
Location: The Shire
Bike: Z1000
State: New South Wales

Re: How far CAN you lean a 12 ?

Postby frog » Wed Oct 15, 2008 4:36 pm

Nope its NOT binned, the footpeg also got ground and the wing went down too.
As pointed out the scrapes are horizontal not vertical and I am guessing there is a flies dick on case left.
BUT as Maxwell Smart would say "I was THAT close"
It was a Brown (Pants) Mountain moment and only the knee and devine intervention kept it up.
It would be the closest as I have EVER been without actually cartwheeling to oblivion. :oops:
Of course a lesser rider would have lost it (insert wank emoticon here :lol: )

The standard has been set gentlemen..... your mission, should you chose to accept it etc. etc. :lol:
Jedi of the darKside
Just because you can ride, doesnt mean you should. My reason on this earth is an example to others what NOT to do.
User avatar
frog
KSRC Member
KSRC Member
 
Posts: 202
Joined: Mon Jun 30, 2008 6:28 am
Location: Rockhampton
Bike: ZX12R
State: Queensland

Re: How far CAN you lean a 12 ?

Postby hoffy » Wed Oct 15, 2008 5:51 pm

Be carefull Frog....dont bin this one :shock:
hoffy
Team Barge
Team Barge
 
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Re: How far CAN you lean a 12 ?

Postby aardvark » Wed Oct 15, 2008 6:40 pm

If you were a better rider, you probably could have parked it perfectly upside down, resting on the bars, tank and seat. ;)
User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Location: Adelaide, S.A.
Bike: Yamaha
State: South Australia

Re: How far CAN you lean a 12 ?

Postby Wattie » Thu Oct 16, 2008 5:57 am

aardvark wrote:If you were a better rider, you probably could have parked it perfectly upside down, resting on the bars, tank and seat. ;)



:lol:
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10041
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: How far CAN you lean a 12 ?

Postby hoffy » Thu Oct 16, 2008 6:19 am

aardvark wrote:If you were a better rider, you probably could have parked it perfectly upside down, resting on the bars, tank and seat. ;)


Ahh yes, that did involve a roundabout just like the Cooley Incident though.. :lol:
hoffy
Team Barge
Team Barge
 
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Re: How far CAN you lean a 12 ?

Postby frog » Thu Oct 16, 2008 10:43 am

aardvark wrote:If you were a better rider, you probably could have parked it perfectly upside down, resting on the bars, tank and seat. ;)

Then I would be able to ride bikes for a living eh ? :lol:
Jedi of the darKside
Just because you can ride, doesnt mean you should. My reason on this earth is an example to others what NOT to do.
User avatar
frog
KSRC Member
KSRC Member
 
Posts: 202
Joined: Mon Jun 30, 2008 6:28 am
Location: Rockhampton
Bike: ZX12R
State: Queensland

Re: How far CAN you lean a 12 ?

Postby Gosling1 » Fri Oct 17, 2008 6:15 pm

frog wrote:.....sorry I didnt catch up to you at the GP Goz, the free piss and food was just too much and my phone died one day into the trip :cry:....


no drama mate - I didn't end up getting any leave for this trip anyway......its the WSB only at this stage. Maybe next year I will finally get down to the GP ?

Nice work on the lean angle too !! :shock: :shock: FMD you must have filled your smalls !!!

:lol:
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: How far CAN you lean a 12 ?

Postby jonoZRX » Fri Oct 17, 2008 10:12 pm

You obviously had your tyre pressure set to 35.22223 psi, any higher and the 12 just runs out of traction and falls over.

I was searching tyre threads this morning and found a really funny one
jonoZRX
 

Next

Return to ZX-R Older Model Discussion

Who is online

Users browsing this forum: No registered users and 3 guests

cron