zx9r 99 (C model) intake

ZX2R, ZXR400, ZXR750, ZX6R, ZX7R, ZX9R & ZX12R & others.

zx9r 99 (C model) intake

Postby Saki » Tue Dec 11, 2007 11:54 am

G'day guys,

just having a look at the bikes intake, under the head light where those air intake slots are, it actually seems to be all closed off and 2 little tubes are what suck in the air.

My question is can u open those slots right up to get more air in? or is it best just leaving it how it is ?

Has anyone attempted it before ? wat results did people get?

Cheers,
Nick
ZX-2R '88 -> ZX636 '06 -> ZX-9R '99 -> ZX-10R '04 -> Z1000 '03 -> ZX-10R '04 -> ZX-10R '08
User avatar
Saki
KSRC Contributor
KSRC Contributor
 
Posts: 2167
Joined: Wed Feb 22, 2006 5:59 pm
Bike: ZX10R
State: Western Australia

Re: zx9r 99 (C model) intake

Postby MickLC » Tue Dec 11, 2007 1:56 pm

The two little tubes inside the ram-air ducts are the carb balance tubes that equalise the pressure on the carbs to compensate for the ram-air pressurising the airbox. The main body of air is still going through the larger ducts and into the airbox.

Leave them as they are and don't forget to reconnect them if you ever take the fairings off otherwise it will run like shit and get worse the faster you go.
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MickLC
Team Crim
 
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Re: zx9r 99 (C model) intake

Postby JetPilot » Tue Dec 11, 2007 4:57 pm

Mick C wrote:The two little tubes inside the ram-air ducts are the carb balance tubes that equalise the pressure on the carbs to compensate for the ram-air pressurising the airbox. The main body of air is still going through the larger ducts and into the airbox.

Leave them as they are and don't forget to reconnect them if you ever take the fairings off otherwise it will run like shit and get worse the faster you go.



Spot on Mick. ;)
Kawasaki Z1000r 2012
User avatar
JetPilot
KSRC Contributor
KSRC Contributor
 
Posts: 2455
Joined: Tue Dec 05, 2006 6:15 pm
Location: The Shire
Bike: Z1000
State: New South Wales

Re: zx9r 99 (C model) intake

Postby mick_dundee » Tue Dec 11, 2007 6:00 pm

Why would you wanna fix what isn't fucked anyways?? Ya hear every man and their dog say "Ya gotta love the 9"
A good mate will bail you out of jail, a true mate will be sitting in the cell next to you saying "Damn, we fucked up!!!"
mick_dundee
Team Naked
Team Naked
 
Posts: 5344
Joined: Sat Jul 09, 2005 2:05 pm
Location: Kilmore
Bike: Suzuki
State: Victoria

Re: zx9r 99 (C model) intake

Postby Slow and wobbly » Tue Dec 11, 2007 7:10 pm

Mick C wrote:The two little tubes inside the ram-air ducts are the carb balance tubes that equalise the pressure on the carbs to compensate for the ram-air pressurising the airbox. The main body of air is still going through the larger ducts and into the airbox.

Leave them as they are and don't forget to reconnect them if you ever take the fairings off otherwise it will run like shit and get worse the faster you go.


What would he :arrowu: know? Those tubes are actually photon collectors for the flux capacitor. He's just spinning the factory line of "carburettor balance tubes" :roll:




Actually what they do is this -
Because the "Ram Air" system imparts such a force on the carb slides it causes them to jam / stick in their guides because of the air pressure against them. These tubes do something magical and balance this positive force with a negative - Yin Yang / The force, Dark side - kinda stuff and make the Kawasaki motorbicycle propel itself ever faster towards the horizon.
In short Saki don't mess with them they hold a mysterious power starwars2
I got a sweater for my birthday. I realy wanted a moaner or a screamer.
Image
User avatar
Slow and wobbly
KSRC Contributor
KSRC Contributor
 
Posts: 1541
Joined: Sun Sep 11, 2005 8:51 am
Location: Melbourne
Bike: Scooter
State: Victoria

Re: zx9r 99 (C model) intake

Postby MickLC » Wed Dec 12, 2007 6:07 am

Slow and wobbly wrote:
Mick C wrote:The two little tubes inside the ram-air ducts are the carb balance tubes that equalise the pressure on the carbs to compensate for the ram-air pressurising the airbox. The main body of air is still going through the larger ducts and into the airbox.

Leave them as they are and don't forget to reconnect them if you ever take the fairings off otherwise it will run like shit and get worse the faster you go.


What would he :arrowu: know? Those tubes are actually photon collectors for the flux capacitor. He's just spinning the factory line of "carburettor balance tubes" :roll: .....



Bugger, you caught me out :oops: :lol:
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MickLC
Team Crim
 
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Re: zx9r 99 (C model) intake

Postby Saki » Thu Dec 13, 2007 9:55 am

k sounds all good thought i would ask before hand! :D

thanks guys
ZX-2R '88 -> ZX636 '06 -> ZX-9R '99 -> ZX-10R '04 -> Z1000 '03 -> ZX-10R '04 -> ZX-10R '08
User avatar
Saki
KSRC Contributor
KSRC Contributor
 
Posts: 2167
Joined: Wed Feb 22, 2006 5:59 pm
Bike: ZX10R
State: Western Australia


Return to ZX-R Older Model Discussion

Who is online

Users browsing this forum: No registered users and 7 guests