Page 1 of 2

Just Joined

PostPosted: Fri Nov 25, 2011 8:21 am
by pah
Hi Guys,

I've just joined the KSRC forum. I am based in Western Sydney. Who do you guys recommend for bike servicing? Bike shop? Do we have a member who's a bike mechanic and does home visit on a fee for service basis?

My 2006 ZRX1200 has just clocked up 12k. I've changed the oil and filter. I might have a go at the brake and clutch fluids. Is it true that there's a need to keep a close eye on the swing arm bolt? Any hot tips that I should know about?



PAH

Re: Just Joined

PostPosted: Fri Nov 25, 2011 8:43 am
by Smitty
...welcome

Re: Just Joined

PostPosted: Fri Nov 25, 2011 9:25 am
by Errol
G'day pah,
I flicked you the link on ZRXOA, good to see ya made it here.

Bleedin' the clutch is simple enough, but the front brakes can be a nightmare, even with a vacumn bleeder.

I have always serviced all my own vehicles inc all brake work, but the ZRX front brakes are a whole nother ball game...... sometimes, be prepared.

No problems if you don't let any air in the system, for some reason once in it can @ times be a downright pain to get out.

I would actually suggest to get a bike shop to quote you to do it & let them deal with it, which in perfect hindsight is what I will do next time.

And yeah, my ZRX suffered the swingarm nut problem @ around 20,000 klm mark from memory.

I am sure some of the local sydney riders will be along to suggest some ride meets etc & offer advice.

Re: Just Joined

PostPosted: Fri Nov 25, 2011 10:04 am
by pah
Hi Errol, Thanks for all the good info. How important is it to flush the cooling system at 12k? The bike is 6 years old and I note that the book says flush the cooling system every 2 years. Oops - I let that one slip.


PAH

Re: Just Joined

PostPosted: Fri Nov 25, 2011 12:06 pm
by slaps999
Welcome, you will find one or two of us REX owners here. :D

Re: Just Joined

PostPosted: Fri Nov 25, 2011 12:20 pm
by robracer
Hi PAH wave.gif Welcome to KSRC

Re: Just Joined

PostPosted: Fri Nov 25, 2011 12:29 pm
by Phil
Yeh mate, check the swingarm bolt. I had it happen to me as well, lucky I noticed when it was only loose, not missing :shock:

If you love the ZRX you will fit in well round these parts ;)

The one other bit of advie that I have is if you do any work on your cooling system remember to bleed the waterpump ;) :kuda:

Re: Just Joined

PostPosted: Fri Nov 25, 2011 12:34 pm
by laidback
Welcome PAH.... :kuda:

Re: Just Joined

PostPosted: Fri Nov 25, 2011 12:58 pm
by Six Addict
Welcome dude!!

You can take ya bike around to the boss' place and drink his beer while he wOrks on ya bike... Maybe that offer is only valid for zx10s tho :lol:

Re: Just Joined

PostPosted: Fri Nov 25, 2011 1:07 pm
by smithy5
G'day and Welcome.......
Can't go wrong with either of these two workshops, both good sponsors who look after us here at KSRC...
(Kwaka Dealer) Kelen Kawasaki, York Road, Penrith PH (02) 4721 4439
(Non Kwaka Dealer) Allfixed Automotive Castle Hill (02) 9634 1455

Re: Just Joined

PostPosted: Fri Nov 25, 2011 1:31 pm
by Maddog
G'day and welcome aboard... ;)

Re: Just Joined

PostPosted: Fri Nov 25, 2011 2:00 pm
by pah
Thanks for the welcome guys. And thanks for the tip re Allfixed. They're a tad closer than Kelens.

I will go looking for the swingarm nuts. Do they stand out?


PAH

Re: Just Joined

PostPosted: Fri Nov 25, 2011 2:41 pm
by pah
Hi Guys,

I phoned Glenn at Allfixed. I am booked in with him. Thanks for the tip.



PAH

Re: Just Joined

PostPosted: Sat Jan 07, 2012 1:53 pm
by paintman
hi guys just joined bayside of brissy here

posted some pics of my zephyr1100 somwhere

Re: Just Joined

PostPosted: Sat Jan 07, 2012 7:49 pm
by hoffy
paintman wrote:hi guys just joined bayside of brissy here

posted some pics of my zephyr1100 somwhere


Welcome, always love pics of a zeph.. :kuda: