ZRX1200R starting problems

Z, ZRX, ER & other naked bikes. Get naked in here.!

ZRX1200R starting problems

Postby jcmutschler » Sun Aug 20, 2023 5:28 pm

Hi all,

I have a big problem with my 2004 ZRX1200R. For the last few months sometimes it starts and most of the time it doesn't. When you press the starter button nothing is happening. I replaced the starter relay, I checked that there was power coming and going from the starter button and there is but there is no power going to the relay when the bike won't start. Did I got a faulty relay on e-bay or is it something else.
Any ideas on this problem, please help.
Thanks
J-C
jcmutschler
Newbie
 
Posts: 2
Joined: Sun Aug 20, 2023 4:57 pm
Bike: ZRX
State: Queensland

Re: ZRX1200R starting problems

Postby bonester » Fri Aug 25, 2023 9:50 am

Clutch switch could cause that
2 X ZRX1200R 4 X ER6N, GT550, 1988 ZX-10, 4 X GPZ250R, 4 X GPZ900R and GPZ750R :) Yeah I like Kawasakis.
bonester
KSRC Contributor
KSRC Contributor
 
Posts: 2075
Joined: Sun Apr 17, 2005 1:00 pm
Location: Toowoomba/Ipswich Queensland

Re: ZRX1200R starting problems

Postby billwest » Sat Aug 26, 2023 9:50 pm

Lights come on when the key is "on"? Indicators?
Check main fuse?
Clutch in / out, any difference?
Don't ride as if you own the road.......
Ride as if you own the bike!

ZZR1200 ('02), FJR1300 ('19).
User avatar
billwest
VIP MEMBER
VIP MEMBER
 
Posts: 387
Joined: Sat Jan 28, 2006 8:49 pm
Location: Perth, WA
Bike: ZZR1200
State: Western Australia

Re: ZRX1200R starting problems

Postby James » Wed Aug 30, 2023 9:30 am

Could be a side stand/side stand switch issue
James
VIP MEMBER
VIP MEMBER
 
Posts: 337
Joined: Fri May 28, 2004 8:48 am
Location: Sydney
Bike: ZRX
State: New South Wales

Re: ZRX1200R starting problems

Postby jcmutschler » Sun Sep 10, 2023 4:06 pm

:D Thanks for your help guys, I was very close to burn it after spending hours finding nothing. Clutch lever in and the bike started straight away, what a relief!! Can I ride like this for a while until I get a new clutch switch?
Also, what are the best fork seals for a ZRX1200R, I have been using SKF which are supposedly the best but after six months, I have a leek again and the fork tubes are 3years old. What about Arisil seals.

Thanks again guys, it's great to have my ZRX back!!
jcmutschler
Newbie
 
Posts: 2
Joined: Sun Aug 20, 2023 4:57 pm
Bike: ZRX
State: Queensland

Re: ZRX1200R starting problems

Postby javaman » Tue Sep 12, 2023 11:15 am

After many ebay seals, I now sought to find original kwaka ones where possible.

I still can buy seals for 1982 bike (gpz750r1) so there should be plenty.
alien.gif andi - Red GPZ900R, GPZ750R1, KLR650 Tengai, KLR250
"my dad's motorbike is cool it is all ways clean.oheter pepole' s motorbikes
are't like my dad's one it's because their is one not always clean."
-ariel circa 2007
http://GPZninja.blogspot.com/
User avatar
javaman
VIP MEMBER
VIP MEMBER
 
Posts: 2473
Joined: Sun Nov 21, 2004 8:39 pm
Location: Bonbeach, VIC
Bike: GPz900
State: Victoria

Re: ZRX1200R starting problems

Postby Smitty » Thu Sep 28, 2023 12:14 pm

javaman wrote:After many ebay seals, I now sought to find original kwaka ones where possible.

I still can buy seals for 1982 bike (gpz750r1) so there should be plenty.


hey Andi
what bike shop sells the seals? .. or you buying online?
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria


Return to Z, ZRX, ER6 & other nakeds

Who is online

Users browsing this forum: No registered users and 50 guests