520 conversion for 1977-1980 Z1000's

All Old Skool kawasaki discussion - pre 90's

520 conversion for 1977-1980 Z1000's

Postby Gosling1 » Mon Feb 20, 2012 7:20 pm

This is a really simple how-to guide to installing a 520 chain & sprockets to your big old Z1000.

#1 - This conversion is only suitable for the following models:

Z1000A1 - A4, Z1000D1 (Z1R), Z1R MkII, Z1000MkII, Z1000H.

#2 - Basic specs of the OEM sprockets for these models is as follows:

Front - spline count 13, inner diameter 21.7mm, outer diameter 25mm
Rear - PCD 104mm, mounting bolt diameter 10.5mm, hub diameter 80mm


OK, that is the basics covered. All you need to do this conversion is this:

Bin all the OEM 630 shit - chain & sprockets, but keep the front sprocket mounting nut and splined lock washer, and all the rear sprocket mounting hardware.
NOTE - Buy another splined lock washer from Kawasaki.

Purchase the following sprockets from your local tyre dude:

Front sprocket - JTF512. Rear sprocket JTR1478.

These sprockets are the 520 conversion sprockets for the P1-P8 model ZX7R's between 1996 and 2003.

NOTE - Do NOT buy the OEM sprockets for this model - they are 530 sprockets. ( they will fit your Zed but thats not the point :lol: )

Fit one of the splined locking washer - flat (ie - don't fold any tabs) - straight onto the output shaft.
Fit the front sprocket.
Fit the other splined lock washer onto the output shaft over the sprocket.
Do the nut up tight - you can get it tight enough without having the chain fitted or using the rear brake or any of that palaver - just place a small piece of timber under the sprocket so it holds the sprocket while you tighten the nut. It just needs to be snug.
Then fold over 2 opposite sides of the lock washer so it locks the nut in place. The nut does all the work.

Fit the rear sprocket - no differences here from the OEM 630 sprocket. It will just bolt straight into place.
Fit the chain. I used an X-ring chain, nothing too flash or expensive. 122 links you need to cut off maybe 6 depending on the gearing.

Which brings me to gearing. OEM 630 gearing on these models varies, but 15/35 is not uncommon.

You cannot use this gearing with either 520 or 530 conversions. 17/40 is close, but after some experimentation I am going to 17/38 on the Black Pearl for longer legs on the highway. Currently it is fitted with 17/41, so it is good off the mark ! :lol:

That's it. Easiest conversion known to mankind. 1 additional part only ( the extra splined washer spaces out the front sprocket to the correct position).

Heaps less unsprung weight, and less power loss through that massive heavy boat-anchor chain known as 630. It is so much overkill.

Have fun :kuda:
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: 520 conversion for 1977-1980 Z1000's

Postby h.b.bear » Mon Feb 20, 2012 8:17 pm

:shock:
h.b.bear
KSRC Contributor
KSRC Contributor
 
Posts: 1175
Joined: Wed Oct 27, 2010 2:21 pm
Location: Tamworth NSW
Bike: ZRX
State: New South Wales

Re: 520 conversion for 1977-1980 Z1000's

Postby Phil » Tue Feb 21, 2012 9:39 pm

Fuck yeah..........mouth is now watering
Phil

2018 Z900RS
2017 Z125 Pro

HCC - Road Captain
User avatar
Phil
Philthy
Philthy
 
Posts: 5811
Joined: Thu Jul 01, 2004 8:44 am
Location: somewhere in nasho

Re: 520 conversion for 1977-1980 Z1000's

Postby hoffy » Tue Feb 21, 2012 10:38 pm

Do i get to havago tomoz??
hoffy
Team Barge
Team Barge
 
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Re: 520 conversion for 1977-1980 Z1000's

Postby Gosling1 » Tue Feb 28, 2012 1:39 pm

looks like next time Hoffy - bit wet today :shock: :lol:

cheers cnut.
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: 520 conversion for 1977-1980 Z1000's

Postby Kwakked Up » Sun Mar 04, 2012 8:46 am

Thanks Gos

You have given me sooo much info for my project my head is full. You are like a freakin walking encyclopdedia :kuda:

Is there a way of saving this stuff on here so I can access it later, like that one you did on sticking a relay into the electricals for a more direct power supply to the coils?

cheers
06 zx10r - road
99 zx7r - trackie
77 z1000 - project
User avatar
Kwakked Up
VIP MEMBER
VIP MEMBER
 
Posts: 580
Joined: Mon Jan 10, 2011 2:18 pm
Location: Goulburn
Bike: ZX10R
State: New South Wales

Re: 520 conversion for 1977-1980 Z1000's

Postby Gosling1 » Sun Mar 04, 2012 10:27 am

Kwakked Up wrote:.......Is there a way of saving this stuff on here so I can access it later, like that one you did on sticking a relay into the electricals for a more direct power supply to the coils?......


:kuda: no probs mate

This thread is now a sticky - so it will always be at the top of the page for threads in Classic Kawi discussions - you won't have to go digging for it.

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: 520 conversion for 1977-1980 Z1000's

Postby Kwakked Up » Mon Mar 05, 2012 5:58 pm

thanks for that, damned good thing that sticky :D

The only way I found of making them easy to find was to make some lame post on the thread so i could find them in my post section :oops:
06 zx10r - road
99 zx7r - trackie
77 z1000 - project
User avatar
Kwakked Up
VIP MEMBER
VIP MEMBER
 
Posts: 580
Joined: Mon Jan 10, 2011 2:18 pm
Location: Goulburn
Bike: ZX10R
State: New South Wales

Re: 520 conversion for 1977-1980 Z1000's

Postby Eastoe » Thu May 23, 2013 2:06 pm

The rear sprocket is also good for the 82 GPZ750.
http://www.jtsprockets.com/catalogue/model/5246
Eastoe
KSRC Member
KSRC Member
 
Posts: 102
Joined: Fri Feb 10, 2006 6:11 pm
Location: Casula NSW
Bike: GPz750
State: New South Wales


Return to Classic Kawi Discussion

Who is online

Users browsing this forum: No registered users and 9 guests