GPZ 750 1984 restoration project

All GPx and GPz Models

GPZ 750 1984 restoration project

Postby The_Fixer » Sat Dec 02, 2017 8:08 pm

G'day guys.
Been about 15 years since I last rode (CB750F 1976). Up and down about wether I would do it again.
Sydney is a hairy prospect for taking up riding again.
Anyway, was at work and saw this bike sitting there all neglected and ended up asking the owner of the company next door who owns the bike out there?
He said "You do, if you want it".
Long story short, I got it. Free. Hasn't ran in 5 years, not busted, it just got forgotten about.
1984 GPZ 750a. Looking a bit sad, but not as sad as I thought it would be.
Have started working on it. It is my first resto project and I'm keen to see how it works out.
Will post pics when I figure out how to!
The_Fixer
Newbie
 
Posts: 32
Joined: Sat Dec 02, 2017 7:47 pm
Bike: GPz750
State: New South Wales

Re: GPZ 750 1984 restoration project

Postby BrettZZR » Mon Dec 04, 2017 11:22 am

Winner winner! Those are awesome, and definitely worth fixing.

Post some pic... Oh... Umm... click HERE for a quick how-to on posting pics on a forum...

(-8
User avatar
BrettZZR
VIP MEMBER
VIP MEMBER
 
Posts: 604
Joined: Fri Apr 13, 2012 4:44 pm
Location: Perth
Bike: ZZR1100
State: Western Australia

Re: GPZ 750 1984 restoration project

Postby pkay » Mon Dec 04, 2017 12:02 pm

Winner!
Nothing beats a free bike. You'll find that many of the parts are still available so shouldn't have too many issues puttting it back on the road. There is a lot of parts interchange with other models of this vintage so make sure you grab yourself the parts book and search by part number. Ebay is your friend although the posatge can be a bit nasty. You'll be suurprised what you can still get from Kawasaki.
I have one too, great bike, not going to pull your arms out but fun all the same. You can see apicture of it on my facebook site Brisbane Clasic Motorcycle Collection.
PK
"Too many bikes is never enough"
ZXR750H1,GPX750R,GPz600R,750,900R,1000RX,KR250,Z1a,Mach3,Z1300 and..
pkay
KSRC Member
KSRC Member
 
Posts: 158
Joined: Thu Jan 30, 2014 1:13 pm
Location: Brizvegas
Bike: ZXR750
State: Queensland

Re: GPZ 750 1984 restoration project

Postby The_Fixer » Tue Dec 05, 2017 6:37 pm

Ok, I'm back Uploading my pics to Photobucket was slower than a wet epoch.

The bike is complete, I had taken some bits off before.

Image

Had a little accident with the tacho, oops...

Image

The fairing liner was ugly, so cleaned it up....

Image

Image

Image

Took off the rocker cover, wow, look at that! these pics are as it happened....

Image

Image

Image
The_Fixer
Newbie
 
Posts: 32
Joined: Sat Dec 02, 2017 7:47 pm
Bike: GPz750
State: New South Wales

Re: GPZ 750 1984 restoration project

Postby The_Fixer » Tue Dec 05, 2017 6:41 pm

BTW, thanks for the welcome guys.

The last Kawa I owned was the good old 500 triple. What a lethal weapon! Don't know how I'm still alive after that one.
The_Fixer
Newbie
 
Posts: 32
Joined: Sat Dec 02, 2017 7:47 pm
Bike: GPz750
State: New South Wales

Re: GPZ 750 1984 restoration project

Postby Mister_T » Tue Dec 05, 2017 7:31 pm

That is quite a cleanup job you have there. It will eventually make a fine candidate for club rego. Somebody must have really liked the colour blue.
Lots of pattern parts available for these, places like http://www.wemoto.com.au (based in Wollongong and supplied by the mothership in England) are worth a look for the more common wearing bits. I bought some genuine grips from them the other day which are much nicer than the aftermarket jobbies the Resurrection GPX was wearing when acquired.

How are the insides of the fuel tank? I'm guessing stale fuel and outdoor(?) storage have not been kind to the metal. Keep us posted. It looks like you are well stuck into it.
User avatar
Mister_T
VIP MEMBER
VIP MEMBER
 
Posts: 205
Joined: Sat Dec 12, 2015 10:18 am
Bike: GPx750
State: Victoria

Re: GPZ 750 1984 restoration project

Postby The_Fixer » Wed Dec 06, 2017 4:56 am

It had a heavy cover over the top of it, so it had some protection.

Surprisingly, the tank is very clean inside with no signs of rust. It was empty and has a strong stale fuel smell. Small amount of rust on the fuel level sender and the wiper bar on it wasn't touching the slider, which I've fixed now.
Carbies are reasonably clean inside, but will run a new kit through. Softening up the rubber mounts at the moment.
Can't believe how clean it is inside the rocker cover. Like it's brand new. Oil filter looked new too. Looks as though it was looked after before it was put aside.

Brake master need fixing or replacing. Muffler had some water inside, so I'll pull that apart and have a look.
Last edited by The_Fixer on Wed Dec 06, 2017 4:54 pm, edited 1 time in total.
The_Fixer
Newbie
 
Posts: 32
Joined: Sat Dec 02, 2017 7:47 pm
Bike: GPz750
State: New South Wales

Re: GPZ 750 1984 restoration project

Postby pkay » Wed Dec 06, 2017 12:57 pm

Bugger about the tacho. Very complete you've done well. Usually missing bits are the pain but doesn't seem to be anything missing from the photos
PK
"Too many bikes is never enough"
ZXR750H1,GPX750R,GPz600R,750,900R,1000RX,KR250,Z1a,Mach3,Z1300 and..
pkay
KSRC Member
KSRC Member
 
Posts: 158
Joined: Thu Jan 30, 2014 1:13 pm
Location: Brizvegas
Bike: ZXR750
State: Queensland

Re: GPZ 750 1984 restoration project

Postby The_Fixer » Wed Dec 06, 2017 5:30 pm

Okay guys, another question.
What is the best coating system for the frame?

I'm not overly taken by the original paint scheme and had other ideas n mind. But the missus thinks the original scheme would be the best.

Opinions?
The_Fixer
Newbie
 
Posts: 32
Joined: Sat Dec 02, 2017 7:47 pm
Bike: GPz750
State: New South Wales

Re: GPZ 750 1984 restoration project

Postby BrettZZR » Wed Dec 06, 2017 8:54 pm

The_Fixer wrote:... What is the best coating system for the frame? ...


Powdercoating is excellent, I did it once and never again! Good two part paint - easy to do, easy to touch up.
Got to be black!

As for the colour scheme for the bike, you could go OE black:
Image

or emulate the turbo:
Image

I'd be very tempted to try replicate the later 9R scheme:
Image

I think the kawa green is overused, but will always attract attention, and with blue and white works nicely:
Image

Talking of white, I saw this in the google images and there are those on here that would approve:
Image

(-8
User avatar
BrettZZR
VIP MEMBER
VIP MEMBER
 
Posts: 604
Joined: Fri Apr 13, 2012 4:44 pm
Location: Perth
Bike: ZZR1100
State: Western Australia

Re: GPZ 750 1984 restoration project

Postby pkay » Thu Dec 07, 2017 12:07 pm

Once you go black - and you can get the decals from the UK as well.

I have powdercoated in the past but now paint. Easier to touch up when damaged (like when you try to put the engine back in). Plus I think it is cheaper too.
PK
"Too many bikes is never enough"
ZXR750H1,GPX750R,GPz600R,750,900R,1000RX,KR250,Z1a,Mach3,Z1300 and..
pkay
KSRC Member
KSRC Member
 
Posts: 158
Joined: Thu Jan 30, 2014 1:13 pm
Location: Brizvegas
Bike: ZXR750
State: Queensland

Re: GPZ 750 1984 restoration project

Postby The_Fixer » Thu Dec 07, 2017 5:26 pm

Yeah, I have heard powdercoating and 2 pack comes with issues over longevity with maintenance. Just looking for viewpoints about it all.

Maybe you're onto something there pkay, a reason for the traditional ways?"
The_Fixer
Newbie
 
Posts: 32
Joined: Sat Dec 02, 2017 7:47 pm
Bike: GPz750
State: New South Wales

Re: GPZ 750 1984 restoration project

Postby Gosling1 » Thu Dec 07, 2017 7:04 pm

Powdercoating is fine, as long as the frame prep is 100%. My local powdercoaters also have a blasting shed, so the frame and any other bits are all sandblasted properly, immediately before the powdercoating is applied.

Looks like a great score for $0 !! These are the best bikes ;)

No surprise to see the internals in good nick - these old 2-valve motors are bulletproof. You should not have to replace anything internally. The externals - clutch cables etc - may need looking at.

There are a lot of places that do spares - one of the best in Oz is wemoto.com.au - they have a great range of pattern and OEM parts.

Looking forward to the progress photos of this bike :kuda:
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

Re: GPZ 750 1984 restoration project

Postby pkay » Fri Dec 08, 2017 1:54 pm

I had to replace the starter clutch on mine and the spark plug threads in the head had suffered from stupidity and had to be redone. Other than that I probably need to set up the carbies as can be a bastard to get going when I haven't run it for a while but once it's going starts on the button. It does have 80,000km and is whisper quiet and blows no smoke.
PK
"Too many bikes is never enough"
ZXR750H1,GPX750R,GPz600R,750,900R,1000RX,KR250,Z1a,Mach3,Z1300 and..
pkay
KSRC Member
KSRC Member
 
Posts: 158
Joined: Thu Jan 30, 2014 1:13 pm
Location: Brizvegas
Bike: ZXR750
State: Queensland

Re: GPZ 750 1984 restoration project

Postby Sulli » Mon Dec 11, 2017 7:50 pm

I may have a tacho for you talk to me https://www.facebook.com/john.sullivan.3597e
Nostradamus probably got it right
User avatar
Sulli
KSRC Contributor
KSRC Contributor
 
Posts: 1095
Joined: Tue Jun 21, 2005 7:12 pm
Location: Brisbane/southside
Bike: ZX9R
State: Queensland

Next

Return to GPX & GPZ Discussion

Who is online

Users browsing this forum: No registered users and 4 guests