GPX Tank Sealer?

All GPx and GPz Models

GPX Tank Sealer?

Postby loubre » Sun Jun 26, 2011 1:42 pm

Hi, have just noticed that my GPX 250 tank has succumbed to the dreaded pinhole leak syndrome! Have done some research online and would like to know if anyone has used the KBS MotorCycle Tank Sealer Kits and with what sort of results? So far it's only the one very tiny little hole just barely weeping on the left side bottom seam but would like to fix it before it gets any worse! I can get a second hand tank for $450 from fleabay (even the right colour) but who's to say it's not going to have the same problems anyway. Thanks Lou
2005 BMW R1200RT
2012 ZX6R
User avatar
loubre
KSRC Member
KSRC Member
 
Posts: 283
Joined: Tue Jun 21, 2011 8:43 pm
Bike: ZX6R
State: Northern Territory

Re: GPX Tank Sealer?

Postby the kid » Sun Jun 26, 2011 4:18 pm

Have not heard anything about the KBS stuff but POR and Kreme ?sp are suposed to get the job done . Make sure what ever you get has an etch primer to use before the final coat of goo and follow the instruction to the letter . The coating can peel away if not prepared properly .
Ummmm let me see
User avatar
the kid
KSRC Addict
KSRC Addict
 
Posts: 3948
Joined: Thu May 12, 2005 5:10 pm
Location: Bendigo
Bike: Yamaha
State: Victoria

Re: GPX Tank Sealer?

Postby ducati_paul » Sun Jun 26, 2011 4:50 pm

Used the POR on my ZZR, follow the instructions and it does a great job! 8)
2012 Royal Enfield Military for the Road
User avatar
ducati_paul
KSRC Contributor
KSRC Contributor
 
Posts: 1713
Joined: Tue Aug 22, 2006 8:58 pm
Location: Sydney
Bike: ZX10R
State: New South Wales

Re: GPX Tank Sealer?

Postby h.b.bear » Sun Jun 26, 2011 4:51 pm

por 15 i have heard is pretty good stuff and you can buy the motor bike tank kit for $75.00+postage.I read in another forum i am involved with were a bloke used it and said it was also a good paint stripper .so avoid paintwork.

http://www.ppcco.com.au//kits3.htm
h.b.bear
KSRC Contributor
KSRC Contributor
 
Posts: 1175
Joined: Wed Oct 27, 2010 2:21 pm
Location: Tamworth NSW
Bike: ZRX
State: New South Wales

Re: GPX Tank Sealer?

Postby loubre » Sun Jun 26, 2011 6:21 pm

thanks will order some of that and give it a go, thanks also for the paint stripping warning, good to know!
2005 BMW R1200RT
2012 ZX6R
User avatar
loubre
KSRC Member
KSRC Member
 
Posts: 283
Joined: Tue Jun 21, 2011 8:43 pm
Bike: ZX6R
State: Northern Territory

Re: GPX Tank Sealer?

Postby h.b.bear » Sun Jun 26, 2011 6:27 pm

loubre wrote:thanks will order some of that and give it a go, thanks also for the paint stripping warning, good to know!



their ph is 1-800 643 229
fax 02 9999 03 94
they are at Warriewood and acording to my order form you will be looking at $54.00 just for delivery to NT
h.b.bear
KSRC Contributor
KSRC Contributor
 
Posts: 1175
Joined: Wed Oct 27, 2010 2:21 pm
Location: Tamworth NSW
Bike: ZRX
State: New South Wales

Re: GPX Tank Sealer?

Postby loubre » Sun Jun 26, 2011 6:33 pm

still cheaper than another tank, lol
2005 BMW R1200RT
2012 ZX6R
User avatar
loubre
KSRC Member
KSRC Member
 
Posts: 283
Joined: Tue Jun 21, 2011 8:43 pm
Bike: ZX6R
State: Northern Territory

Re: GPX Tank Sealer?

Postby jj-taylor » Mon Jun 27, 2011 11:08 pm

I have just used the KBS tank kit and it seems to work very well, I was also talking to a mate about it and he said he used some in a tank that sprung a leak in the NT then rode it back to Perth without issue. As long as you do all the cleaning and preparation properly it works well.

Cheers,

Jeff
Growing older, but not up!
jj-taylor
Newbie
 
Posts: 6
Joined: Sun Sep 26, 2010 8:41 am
Location: Perth W.A
Bike: GPz750
State: Western Australia

Re: GPX Tank Sealer?

Postby kghost » Tue Jun 28, 2011 9:55 am

Definitely use the POR-15.

I've done about 4 or 5 tanks over the years with it.

Stay away from the Kreme....I've seen some unfortunate outcomes.

Doesn't seem to like some additives in petrol and it peels.

Never used the KBS
kghost
Newbie
 
Posts: 9
Joined: Mon Jun 27, 2011 3:49 pm
Bike: Z750
State: Queensland

Re: GPX Tank Sealer?

Postby loubre » Tue Jun 28, 2011 4:44 pm

Thanks everyone, have ordered the POR, will let you know how I get on once it's arrived and I've used the stuff. Really great to be able to get feedback from actual users, have always been a bit suss about the product feedback sites but definitely great to get some feedback and info from fellow riders. Thanks again Lou
2005 BMW R1200RT
2012 ZX6R
User avatar
loubre
KSRC Member
KSRC Member
 
Posts: 283
Joined: Tue Jun 21, 2011 8:43 pm
Bike: ZX6R
State: Northern Territory

Re: GPX Tank Sealer?

Postby loubre » Mon Jul 18, 2011 7:20 pm

Ok, have finally got round to fixing the tank, used a POR kit, fiddly but decent instructions supplied and took almost all weekend doing it right but now have a NON leaking tank, now though have another problem and do think it's directly related to the tank, when I drained the tank I noticed water in the fuel so threw that lot away and after I fixed the tank filled with clean fuel but now the little cow won't idle below about 4000 rpm and doesn't rev clean under load till about 8000 rpm so am assuming some of that water has done some nasties inside the carbies so job for this weekend, lucky it's a long weekend up here!
2005 BMW R1200RT
2012 ZX6R
User avatar
loubre
KSRC Member
KSRC Member
 
Posts: 283
Joined: Tue Jun 21, 2011 8:43 pm
Bike: ZX6R
State: Northern Territory

Re: GPX Tank Sealer?

Postby h.b.bear » Mon Jul 18, 2011 7:31 pm

glad to hear it worked good,yet to do mine but by the sound of it ,it is pretty straight forward 8)
h.b.bear
KSRC Contributor
KSRC Contributor
 
Posts: 1175
Joined: Wed Oct 27, 2010 2:21 pm
Location: Tamworth NSW
Bike: ZRX
State: New South Wales

Re: GPX Tank Sealer?

Postby loubre » Mon Jul 18, 2011 8:00 pm

Yeah Bear, quite simple to do, supplied instructions were very easy to follow, it is quite time consuming though so allow at least a full weekend to do it properly, well a full day and a bit if you don't count the refreshment breaks, lol, oh and don't do it anywhere near the kitchen table, she who must be obeyed went right off her head :lol:
2005 BMW R1200RT
2012 ZX6R
User avatar
loubre
KSRC Member
KSRC Member
 
Posts: 283
Joined: Tue Jun 21, 2011 8:43 pm
Bike: ZX6R
State: Northern Territory

Re: GPX Tank Sealer?

Postby h.b.bear » Mon Jul 18, 2011 8:15 pm

loubre wrote:Yeah Bear, quite simple to do, supplied instructions were very easy to follow, it is quite time consuming though so allow at least a full weekend to do it properly, well a full day and a bit if you don't count the refreshment breaks, lol, oh and don't do it anywhere near the kitchen table, she who must be obeyed went right off her head :lol:


their a breed of there own,without a sense of humour or understanding :lol:
h.b.bear
KSRC Contributor
KSRC Contributor
 
Posts: 1175
Joined: Wed Oct 27, 2010 2:21 pm
Location: Tamworth NSW
Bike: ZRX
State: New South Wales

Re: GPX Tank Sealer?

Postby loubre » Mon Jul 18, 2011 8:20 pm

too bloody true, banned me from the kitchen, had to keep sending the kids in to get me a beer from the fridge :lol:
2005 BMW R1200RT
2012 ZX6R
User avatar
loubre
KSRC Member
KSRC Member
 
Posts: 283
Joined: Tue Jun 21, 2011 8:43 pm
Bike: ZX6R
State: Northern Territory

Next

Return to GPX & GPZ Discussion

Who is online

Users browsing this forum: No registered users and 19 guests