Page 1 of 1

ZZR1200 Rear Shock

PostPosted: Tue Jul 17, 2018 4:37 pm
by billwest
I replaced my rear shock with a somewhat newer ZZR OEM one.
Details here.

Riding and cornering is much nicer now.
I did dial it in a bit differently than the old one.
I put preload at around 4.5 (old one was 3.5), and damping adjustment at 3 (2 on the old one).
I weigh around 100kg.

So far so good.

Re: ZZR1200 Rear Shock

PostPosted: Tue Jul 17, 2018 4:55 pm
by BrettZZR
Mmmm... Is the old one rebuild-able? It is exactly the same size as the 11's all round except for the fork width of the bottom bracket being a few mm narrower on the 1200 unit.

Would you flog it for an inconceivably small amount of cash? If it's rebuild-able then it might be a good "upgrade" with the remote adjustment etc etc?

Dunno. Better bust out a few of my workshop manuals...

(-8

Re: ZZR1200 Rear Shock

PostPosted: Tue Jul 17, 2018 5:08 pm
by billwest
I don't know about rebuildable, but have a read of this.

I emailed them, and they said they could do it for around $800.

Ikon pic:

ikon.jpg
ikon.jpg (147.34 KiB) Viewed 1328 times


I was thinking of keeping mine in case I want to do the Ikon thing. I can then send it away while still having a shock on the bike.

Re: ZZR1200 Rear Shock

PostPosted: Tue Jul 17, 2018 11:27 pm
by BrettZZR
billwest wrote:... keeping mine in case ...

Fairy Nuff... Makes sense.

12 unit is pressurised, and the workshop manual doesn't mention rebuilding, not that that means it can't be done.

Might keep a butchers hook out for a cheapie, and have a poke and prod (sometime in the next milennium when I have some free time!)

(-8

Re: ZZR1200 Rear Shock

PostPosted: Mon Jul 30, 2018 11:21 am
by billwest
Brett, how small an amount were you thinking?
I'm considering $50.

Bill.

Re: ZZR1200 Rear Shock

PostPosted: Mon Jul 30, 2018 2:38 pm
by BrettZZR
Could work - I'll swing past sometime and have a look.

Re: ZZR1200 Rear Shock

PostPosted: Thu May 30, 2019 10:18 am
by billwest
It is still here, Brett .....
Could go for $40.