ZZR 250 fairings

ZZR 250, 600, 1100 & 1200

ZZR 250 fairings

Postby DWC » Sat Jun 04, 2011 9:26 am

I got my bike 2 weeks ago and don't have a manual for it yet.
Can somebody tell me how to get the rear/underseat fairing off. I've taken out the screws front and back, but I can't get it out of the tail-light section.
Cheers

Dave
DWC
Newbie
 
Posts: 1
Joined: Sun May 15, 2011 11:41 am
Bike: ZZR250
State: New South Wales

Re: ZZR 250 fairings

Postby MrWasabi » Sat Jun 04, 2011 10:48 am

Hi and welcome.

From memory to remove the tail fairings there is a screw on the front section holding it to the frame and one joining it to the plastic bit just behind the seat. You also need to remove the luggage clips on each side. To do that just flick them up and underneath is a screw. After that it should just slip off
Bit hard to describe but if you look at the bike you should be able to decipher my gibberish
Mistakes:
Learn from the mistakes of others. You won't live long enough to make all of them yourself.

http://www.sentechcomputers.com.au
User avatar
MrWasabi
Team Kuda
Team Kuda
 
Posts: 2039
Joined: Tue Feb 12, 2008 12:59 pm
Location: Omicron Persei 8
Bike: ZX6R
State: New South Wales

Re: ZZR 250 fairings

Postby RyBoy » Fri Jun 17, 2011 10:01 am

Hi mate,
So you have taken out the screws that are under the luggage strap points,
I thought I was missing something too,
But then I gave it a bit of a pull.. (lol)
And all that was holding the fairing on was the rubber plug things, and they take a bit of muscle to pull out,
Have a squiz with a torch from underneath; you should be able to see the plug up the front of the fairing
Good Luck Buddy
Ry
User avatar
RyBoy
Newbie
 
Posts: 18
Joined: Wed Jan 12, 2011 1:16 pm
Location: Wodonga
Bike: ZZR250
State: Victoria


Return to ZZR Discussion

Who is online

Users browsing this forum: No registered users and 25 guests