1993 ZZR 600 stopped!!

ZZR 250, 600, 1100 & 1200

1993 ZZR 600 stopped!!

Postby farmer » Tue Jan 25, 2011 10:39 pm

As i was riding home from work, i pulled over after already ridden around 50 kilometres. As normal my bike started and ran perfect, when i changed from 5th to 6th when i let out the clutch i lost all revs. My bike will start fine and idle away but as soon as the clutch is released when put into gear it losses all revs and stops.. If anyone has any suggestions to what this may be caused by i am willing to give it ago. Your help will be muchly appreciated.
farmer
Warming up
Warming up
 
Posts: 59
Joined: Sun Sep 07, 2008 8:08 pm
Bike: Z1000
State: Queensland

Re: 1993 ZZR 600 stopped!!

Postby waynemorgan » Tue Jan 25, 2011 10:53 pm

Welcome to KSRC ;)

Does it feel like an electrical issue or a fueling issue? IE is it coughing and spluttering when you try to increase the revs or just die suddenly like no spark?

When was the last time the plugs were replaced? Carbs cleaned? Valves checked? Fuel filter checked? There are a lot of variables here to consider - and more experienced people who will be along with other ideas for you to check.
I don't like the term insane - I prefer mentally hilarious!
User avatar
waynemorgan
KSRC Contributor
KSRC Contributor
 
Posts: 1989
Joined: Sun Aug 31, 2008 4:36 pm
Location: Penrith NSW Australia
Bike: ZZR600
State: New South Wales

Re: 1993 ZZR 600 stopped!!

Postby penno » Wed Jan 26, 2011 1:37 am

Perhaps a fault with the side stand switch?
User avatar
penno
KSRC Member
KSRC Member
 
Posts: 199
Joined: Tue Oct 23, 2007 11:52 pm
Location: Gold Coast
Bike: ZZR600
State: Queensland

Re: 1993 ZZR 600 stopped!!

Postby farmer » Wed Jan 26, 2011 7:28 am

Does it feel like an electrical issue or a fueling issue? IE is it coughing and spluttering when you try to increase the revs or just die suddenly like no spark?

When was the last time the plugs were replaced? Carbs cleaned? Valves checked? Fuel filter checked? There are a lot of variables here to consider - and more experienced people who will be along with other ideas for you to check.[/quote]


Doesnt appear to be fuel as it starts and idles fine. Will rev out ok. Wil rev and idle fine when in gear with the clutch in, but when released the motors dies. Even at higher revs.
farmer
Warming up
Warming up
 
Posts: 59
Joined: Sun Sep 07, 2008 8:08 pm
Bike: Z1000
State: Queensland

Re: 1993 ZZR 600 stopped!!

Postby farmer » Wed Jan 26, 2011 7:29 am

penno wrote:Perhaps a fault with the side stand switch?


Will check that out this morning. thanks.
farmer
Warming up
Warming up
 
Posts: 59
Joined: Sun Sep 07, 2008 8:08 pm
Bike: Z1000
State: Queensland

Re: 1993 ZZR 600 stopped!!

Postby tim » Wed Jan 26, 2011 7:46 am

There is a cutout switch on the clutch perch of some bikes so that you have to hold the clutch in when starting the bike. I can't see how that's causing the problem exactly but it sounds like a possibility....
2008 ZX6R Special Edition
User avatar
tim
VIP MEMBER
VIP MEMBER
 
Posts: 5815
Joined: Wed Dec 10, 2008 10:12 pm
Location: Sydney, NSW
Bike: ZX6R
State: New South Wales

Re: 1993 ZZR 600 stopped!!

Postby farmer » Wed Jan 26, 2011 9:35 am

Thanks for your suggestions it appears to be the side stand switch. will have to order a new one. thanks for your help!
farmer
Warming up
Warming up
 
Posts: 59
Joined: Sun Sep 07, 2008 8:08 pm
Bike: Z1000
State: Queensland


Return to ZZR Discussion

Who is online

Users browsing this forum: No registered users and 27 guests