ZX6R, ZX10R, ZX14R, Ninja 1000 etc
by elrond » Wed Apr 19, 2006 8:32 pm
Well the post-theft damage report on the poor 7 is in and its a mixed bag.
My main concern currently is the awful running of the engine.
The mechanic explained it was running like ass because it had been laid on it side and oil had gotten in somewhere it shouldn't have (I can't recall the component but I'm sure someone knows what I'm referring to).
He said that basically the engine would sort itself out but is this sound advice?
The engine is down on power
Power isn't smooth even when holding the same RPM
Prone to stalling/poor take off
It sounds like a drag car (in a bad way)
Suggestions?
-
elrond
- Warming up

-
- Posts: 49
- Joined: Wed Mar 15, 2006 11:27 pm
- Location: Brisbane
by Johnnie5 » Wed Apr 19, 2006 10:53 pm
i would more suspect carbs have crud in them , laying it down has made it an issue
-
Johnnie5
- KSRC Regular

-
- Posts: 546
- Joined: Sun Nov 21, 2004 8:30 pm
- Location: Marayong
-
by Smitty » Wed Apr 19, 2006 11:02 pm
I would be looking at plugs.....
and carbies
lying on its side will fill one of the cylinders with oil
and the plug won't like that..maybe more cylinders too
the carbs which were fine standing right way up may have had some crud
in the bottom of 'em disturbed...so they may need a clean out
otherwise if you have electrics and spark the bits down low
should be fine (unless the thing was run on its sideand then things will get serious...cranks don't like oil starvation)
cheers
GOTTA LUV the 12R!!
-

Smitty
- VIP MEMBER

-
- Posts: 10910
- Joined: Wed Apr 21, 2004 1:59 pm
- Location: 3rd rock from the Sun
- Bike: ZX12R
- State: Victoria
-
by elrond » Fri Apr 21, 2006 1:14 pm
thanks smitty
its going to the mechanics with a note that says
"just fix it - I will forgive you but my wallet won't forgive me"

-
elrond
- Warming up

-
- Posts: 49
- Joined: Wed Mar 15, 2006 11:27 pm
- Location: Brisbane
by Felix » Fri Apr 21, 2006 1:37 pm
If the oil level is ok, then I'd look at carbs like everyone has said. Quite possibly dislodged something or screwed up a float level setting or something...
- Team Furball -

-
Felix
- KSRC Contributor

-
- Posts: 1173
- Joined: Thu Sep 02, 2004 1:54 am
- Location: Osaka
- Bike: Suzuki
- State: Overseas
Return to ZX-R / Ninja Current Model Discussion
Who is online
Users browsing this forum: No registered users and 6 guests