07 ZX10 help needed

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

07 ZX10 help needed

Postby Yella » Sun Aug 14, 2016 4:53 pm

07 ZX10 wont start
No codes
Turn key switch on tacho cycles nothing else happens , press start button, The motor turns over but ecu is not supplying a earth to pump relay, injectors coils

New ECU, Harness, relay box. Checked tip over, clutch, side stand, everything checks out OK but the wont start

Running out of ideas

Ian
Yella
Warming up
Warming up
 
Posts: 41
Joined: Tue Nov 29, 2005 7:47 pm

Re: 07 ZX10 help needed

Postby Mister_T » Mon Aug 15, 2016 12:14 am

Silly question, but have you run the pump by independently connecting it to a battery? Or tested the pump for continuity?

I had an issue with a car not starting. I could hear the pump was not priming. Checks showed no error codes on the ECU and the ECU was not earthing the fuel pump relay (which earths the fuel pump at max volts). Turned out the swimmer fuel pump was open circuit internally, maybe rooted brushes, and the ECU detected that.
User avatar
Mister_T
VIP MEMBER
VIP MEMBER
 
Posts: 205
Joined: Sat Dec 12, 2015 10:18 am
Bike: GPx750
State: Victoria

Re: 07 ZX10 help needed

Postby Wattie » Mon Aug 15, 2016 9:40 pm

sounds like immobiliser.

is the edu matched with the key?
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10039
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: 07 ZX10 help needed

Postby Mister_T » Tue Aug 16, 2016 11:03 am

Wattie wrote:sounds like immobiliser.

Indeed.
Or, as on one car I got running (which had already been through two auto elecs) , a cunning kill switch.
User avatar
Mister_T
VIP MEMBER
VIP MEMBER
 
Posts: 205
Joined: Sat Dec 12, 2015 10:18 am
Bike: GPx750
State: Victoria

Re: 07 ZX10 help needed

Postby Yella » Tue Aug 16, 2016 7:01 pm

The new ecu has had the immobilizer bypassed, but I also tried running 5v to the blue wire on the immobilizer plug.
I have checked the kill switch off it on it crank on it will.
Not having taken an 06/7 ZX10 for a run before I am not sure on the safety cut out but checked the normal stuff, plus all sensors seem to check out ok
Yella
Warming up
Warming up
 
Posts: 41
Joined: Tue Nov 29, 2005 7:47 pm

Re: 07 ZX10 help needed

Postby Yella » Wed Aug 17, 2016 4:43 pm

Sorted new ecu flashed with US file sorted that then bypassed the immobilizer Happy days . Turbo ZX10 to hit the track soon
Yella
Warming up
Warming up
 
Posts: 41
Joined: Tue Nov 29, 2005 7:47 pm

Re: 07 ZX10 help needed

Postby Kwakked Up » Wed Aug 17, 2016 6:08 pm

Turbo zx10 :shock: :kuda:
Yeehaa
06 zx10r - road
99 zx7r - trackie
77 z1000 - project
User avatar
Kwakked Up
VIP MEMBER
VIP MEMBER
 
Posts: 580
Joined: Mon Jan 10, 2011 2:18 pm
Location: Goulburn
Bike: ZX10R
State: New South Wales

Re: 07 ZX10 help needed

Postby Kwakked Up » Sat Aug 20, 2016 5:15 pm

06 zx10r - road
99 zx7r - trackie
77 z1000 - project
User avatar
Kwakked Up
VIP MEMBER
VIP MEMBER
 
Posts: 580
Joined: Mon Jan 10, 2011 2:18 pm
Location: Goulburn
Bike: ZX10R
State: New South Wales

Re: 07 ZX10 help needed

Postby Wattie » Sat Aug 20, 2016 9:57 pm

woot woot :kuda:
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10039
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: 07 ZX10 help needed

Postby Yella » Thu Aug 25, 2016 6:12 pm

Yella
Warming up
Warming up
 
Posts: 41
Joined: Tue Nov 29, 2005 7:47 pm


Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 5 guests

cron