Kawasaki Sportsbike Riders Club - Australia - Online Forum
Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
Fitting a quick shifter
4 posts
• Page 1 of 1
Fitting a quick shifter
by MKY » Fri Jul 25, 2014 4:19 pm
I have a quick shifter that I am going to fit to my zx14r. Hm type. How long should it take to fit and any tips or tricks?
- MKY
- KSRC Member
- Posts: 157
- Joined: Wed Apr 03, 2013 10:06 pm
- Bike: ZRX
- State: Queensland
Re: Fitting a quick shifter
by Baddie » Fri Jul 25, 2014 7:35 pm
If you buy standalone "HM" unit try and connect directly to your OEM harness.
http://superbikesource.com.au/
For aftermarket racing products, from Annitori Quickshifters to Race fairings.
http://tarmactalk.com/forum/forum.php
For aftermarket racing products, from Annitori Quickshifters to Race fairings.
http://tarmactalk.com/forum/forum.php
-
Baddie - KSRC Member
- Posts: 310
- Joined: Sat Oct 02, 2010 9:02 am
- Location: Glenmore Park
- Bike: ZX10R
- State: New South Wales
Re: Fitting a quick shifter
by ducati_paul » Sat Jul 26, 2014 9:06 am
I fitted an HM to my ZX10R, the actual fitting took about 5 minutes (plugs into the top of the coils) then just add how long it takes to remove and replace a tank .... About an hour for me LOL 
2012 Royal Enfield Military for the Road
-
ducati_paul - KSRC Contributor
- Posts: 1713
- Joined: Tue Aug 22, 2006 8:58 pm
- Location: Sydney
- Bike: ZX10R
- State: New South Wales
Re: Fitting a quick shifter
by Maccarocks » Mon Jul 28, 2014 8:57 pm
Yes it's an easy fit....
Just depends on how long it takes you to remove everything...!! But having said that if you are unsure, dont worry about how long it will take, just do it step by step and make sure you remember how everything goes back on.. do the install and make sure the wiring is perfect, loomed up nicely with the other wiring and not going to rub on anything.. double check this stuff so you don't get problems in the future...
Macca
Just depends on how long it takes you to remove everything...!! But having said that if you are unsure, dont worry about how long it will take, just do it step by step and make sure you remember how everything goes back on.. do the install and make sure the wiring is perfect, loomed up nicely with the other wiring and not going to rub on anything.. double check this stuff so you don't get problems in the future...
Macca
Maccarocks
16' - Z1000 (Road)
Too many other bikes to fit in here !!
16' - Z1000 (Road)
Too many other bikes to fit in here !!
-
Maccarocks - KSRC Regular
- Posts: 571
- Joined: Tue Jan 22, 2008 7:02 am
- Location: Melbourne, Victoria
- Bike: ZX10R
- State: Victoria
4 posts
• Page 1 of 1
Return to ZX-R / Ninja Current Model Discussion
Who is online
Users browsing this forum: No registered users and 7 guests