Cracked frame on zx10 13 model

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

Cracked frame on zx10 13 model

Postby Natsev » Fri Jun 06, 2014 11:34 pm

Hi guys,

I hit a deer while riding through my local national park a few days ago, I was probably traveling at about 80kmh when I hit the deer front on, it was a significant impact but I managed to keep the bike upright.

I took my bike to my local repairer and he assessed the bike and believed he found a crack in the frame near my radiator mount, the insurance assessor came out and took some photo's and doesn't believe that the frame is cracked, he took the bike to another repairer for a second opinion and wrote me an email stating that after taking some high resolution photo's he is 100% satisfied that my frame is not cracked. The photo's bellow are not the high res ones he is talking about but were the original photo's he took, I will post up the other photo's when I get them, but does anyone have an opinion or some advice based on what's provided?
As there is two different repairers with two dif opinions should I be asking for an X-ray of the frame?ImageImageImageImage
User avatar
Natsev
Warming up
Warming up
 
Posts: 52
Joined: Wed Jan 08, 2014 1:57 pm
Location: Helensburgh
Bike: ZX10R
State: New South Wales

Re: Cracked frame on zx10 13 model

Postby Kermit » Sat Jun 07, 2014 12:28 am

Ouch,

Take your bike to an independent for assessment,

Laurie Alderton
Address: 2/ 10 Long St, Smithfield, NSW 2164
Fairfield-liverpool, Sydney Metro
Tel: (02) 96092889

Although he prefers the bike just be a fame only.
User avatar
Kermit
KSRC Contributor
KSRC Contributor
 
Posts: 1651
Joined: Sat Apr 17, 2010 6:35 pm
Location: Sydney
Bike: ZX6R
State: New South Wales

Re: Cracked frame on zx10 13 model

Postby Natsev » Sat Jun 07, 2014 1:13 am

Thanks Kermit, I'll give him a call..
User avatar
Natsev
Warming up
Warming up
 
Posts: 52
Joined: Wed Jan 08, 2014 1:57 pm
Location: Helensburgh
Bike: ZX10R
State: New South Wales

Re: Cracked frame on zx10 13 model

Postby sunnycoaster » Sun Jun 08, 2014 7:30 pm

Oh Deer!
Sorry. dontknow.gif
User avatar
sunnycoaster
Newbie
 
Posts: 5
Joined: Sun Sep 15, 2013 8:01 am
Bike: ZX14R
State: Queensland

Re: Cracked frame on zx10 13 model

Postby Jonnymac » Sun Jun 08, 2014 8:17 pm

sunnycoaster wrote:Oh Deer!
Sorry. dontknow.gif

:)
User avatar
Jonnymac
KSRC Contributor
KSRC Contributor
 
Posts: 1165
Joined: Thu Jun 16, 2011 1:33 pm
Bike: ZX6R
State: Victoria

Re: Cracked frame on zx10 13 model

Postby Maccarocks » Sun Jun 08, 2014 10:15 pm

It does look a bit like a small crack... even though it is only a radiator mount lug, the bike will be written off if it is confirmed..!!!

Let me know how you go, but you need to get it assessed by another professional...


Macca
Maccarocks
16' - Z1000 (Road)
Too many other bikes to fit in here !!
User avatar
Maccarocks
KSRC Regular
KSRC Regular
 
Posts: 571
Joined: Tue Jan 22, 2008 7:02 am
Location: Melbourne, Victoria
Bike: ZX10R
State: Victoria

Re: Cracked frame on zx10 13 model

Postby Mazabuzz » Tue Jun 10, 2014 11:03 am

+1 On Laurie Alderton, he's been fixing bent & cracked motorbike parts for years. You can take the bike to him as a whole for an inspection but if any work needs to be done to it you will need to remove everyting other than the engine.
Even if Laurie says it's not a crack i would still look at getting the bike checked for straightness especially with such an impact, you could have bent forks or a twisted frame. Will cost around the $300-$500 range depending on work needed.
User avatar
Mazabuzz
Warming up
Warming up
 
Posts: 58
Joined: Fri May 25, 2012 8:23 am
Bike: ZX6R
State: New South Wales

Re: Cracked frame on zx10 13 model

Postby Natsev » Tue Jun 10, 2014 6:14 pm

Thanks for the advice guys, I spoke to David today (Laurie's son)
And I will be taking the bike for them to have a look.
I also drove out to Parramatta today to look at the bike, and it appears that there is no crack in the frame, and that it was diagnosed incorrectly originally.
The repair bill has come too just over 7k including left and right upper and lower forks.
Hoping for no further damage but time will tell.
Thanks again for advice..
User avatar
Natsev
Warming up
Warming up
 
Posts: 52
Joined: Wed Jan 08, 2014 1:57 pm
Location: Helensburgh
Bike: ZX10R
State: New South Wales

Re: Cracked frame on zx10 13 model

Postby Mickwitchy » Tue Jul 22, 2014 10:46 am

Was there an update after showing Dave Alderton?
Mickwitchy
Warming up
Warming up
 
Posts: 78
Joined: Tue Oct 30, 2012 6:00 pm
Bike: ZX10R
State: ACT

Re: Cracked frame on zx10 13 model

Postby Natsev » Fri Jul 25, 2014 9:12 pm

Yeah no crack, original assessment was incorrect..
User avatar
Natsev
Warming up
Warming up
 
Posts: 52
Joined: Wed Jan 08, 2014 1:57 pm
Location: Helensburgh
Bike: ZX10R
State: New South Wales


Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 11 guests