Page 1 of 1
zx14 new Map done on dyno
Posted:
Fri Jan 11, 2013 2:45 pmby xlur8
Hey guys i just bought the zx14 decided to take the flies out so decided it needed a new tune here is when it had the Power commander put in and tuned about 6 months ago
And this is the tune i had done today 11/1/13 very different results Can anyone tell me if the new tune is ok i thought it was abit low but i havent much of a clue on the readings cheers
Re: zx14 new Map done on dyno
Posted:
Fri Jan 11, 2013 2:53 pmby Blurr
Different dyno's are calibrated very differently. Don't be shocked to loose or gain 15-20hp from shop to shop as some are more realistic than others
Re: zx14 new Map done on dyno
Posted:
Fri Jan 11, 2013 2:53 pmby Blurr
The power curve on the second looks good, very linear.
Re: zx14 new Map done on dyno
Posted:
Fri Jan 11, 2013 2:55 pmby xlur8
thx for the reply cheers
Re: zx14 new Map done on dyno
Posted:
Fri Jan 11, 2013 9:15 pmby Gosling1
Blurr wrote:....The power curve on the second looks good, very linear.....
they started with a great motor and just made it better
Re: zx14 new Map done on dyno
Posted:
Sat Jan 12, 2013 6:06 pmby xlur8
Also guys if i take the baffles out of the yoshi mufflers will that effect the tune ??
Re: zx14 new Map done on dyno
Posted:
Sat Jan 12, 2013 6:44 pmby Blurr
Yep but whether it is positve or negative to power output cant be determined without a dyno.
Usually if the baffles are fairly restrictive you will loose back pressure.
This will generally give you alittle more up top but loose a little in the middle.
Re: zx14 new Map done on dyno
Posted:
Sat Jan 12, 2013 6:47 pmby xlur8
Thanks Blurr will just leave it as is cheers man