ZX7R-P2 suspension settings

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

ZX7R-P2 suspension settings

Postby mrmina » Wed Apr 21, 2004 8:14 pm

hi all,

can anybody tell me what the orginal factory setting are for a zx7r-p2
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Postby mfzx6r » Fri Apr 23, 2004 9:16 am

Mina
Try your local Kwaka shop or the zx7rr Yahoo group someone on there should be able to help you
http://groups.yahoo.com/group/zx7rr/ I think
mario
User avatar
mfzx6r
KSRC Addict
KSRC Addict
 
Posts: 3329
Joined: Thu Apr 22, 2004 8:36 am
Location: Lost :-) in melton VIC
Bike: Other Kawi
State: Victoria

Postby mrmina » Sun Apr 25, 2004 10:32 am

Thanks mario. I'll give peter stevens a call. Thats as local as it gets in melton.
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Postby mfzx6r » Tue Apr 27, 2004 9:27 am

Or RaceReplica onGeelong Road.
Did I see your bike on Coburns road on the weekend ?

mario
User avatar
mfzx6r
KSRC Addict
KSRC Addict
 
Posts: 3329
Joined: Thu Apr 22, 2004 8:36 am
Location: Lost :-) in melton VIC
Bike: Other Kawi
State: Victoria

Postby mrmina » Tue Apr 27, 2004 1:43 pm

Thats me. Pull me over next time.

2 shops i'll never go to in melb are:

* Race Replica (Absolute cock-head, dont like the guy)
* Bikes and Bits in Brighton (Mate of my brothers and he ripped me off)

Peter Stevens (city) are excellent, All west (Melton) Brian is very good with bikes and does alot on my bike and also Bikes Plus are good for gear and tyres.
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Postby mfzx6r » Tue Apr 27, 2004 3:07 pm

Hahahaha
Was that Phil at race Rep ?
He's gone sacked.
All West is that the one near the boat Shop and Alan Mance?


mario
User avatar
mfzx6r
KSRC Addict
KSRC Addict
 
Posts: 3329
Joined: Thu Apr 22, 2004 8:36 am
Location: Lost :-) in melton VIC
Bike: Other Kawi
State: Victoria

Postby mrmina » Wed Apr 28, 2004 8:08 pm

it could have been phil not sure of the name but a real arrogant, smart arse.

Yeah all west is the one next to the boat shop. Brain is awesome and knows his stuff.
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Postby mfzx6r » Thu Apr 29, 2004 1:13 pm

Phil talked absolute crap all the time..
Dark hair and glasses What a wanker :lol: The bullshit use to flow
out of his mouth non stop


mario
User avatar
mfzx6r
KSRC Addict
KSRC Addict
 
Posts: 3329
Joined: Thu Apr 22, 2004 8:36 am
Location: Lost :-) in melton VIC
Bike: Other Kawi
State: Victoria

Postby mrmina » Mon May 03, 2004 1:52 pm

Yeah thats him!

Rude fucker he was
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria

Factory standard suspension settings.

Postby ninjaboy » Mon May 03, 2004 11:26 pm

I'm definitely NO expert,... so I spoke to my Kawasaki mechanic, and he told me that most factory bikes are set with their suspensions in the middle settings - ie, turn the Preload all the way to the softest setting, then count either the "clicks" or number of turns, all the way through until the limit (hardest setting), then calculate the "midline" - usually 2 and a half clicks from either limit.

The other options are to start from the softest settings, and work up.
Or measure the bike sag, G-sag, etc (see other thread re suspension settings).

Hope this helps.

Dr Dan hello.gif
NinjaBoy

At least my mum thinks I'm cool...
~Sweet~!
Image
Image
'98 ZX-9R, Royal blue!
ninjaboy
Newbie
 
Posts: 32
Joined: Sat Apr 24, 2004 2:02 am
Location: Sydney

Postby mrmina » Tue May 04, 2004 1:49 pm

Thanks mate.

I got a hold of the factory manual and done the factory setting last weekend when i got around to it
mrmina
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 7039
Joined: Wed Apr 21, 2004 8:11 pm
Location: Sydenham, Victoria


Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 13 guests