Breaking-in period ZX636R

ZX6R, ZX10R, ZX14R, Ninja 1000 etc

Postby mitch179 » Thu Oct 12, 2006 12:08 pm

there are flaws in that guys argument and it always comes up and is debated on most forums i frequent ..

personally if it was my bike, i would just ride it like i normally do when im riding around town, dont rev it much over 9k and dont labour the motor and vary the revs, when u are on the high way drop it up and down the box to keep the revs varied and it should be cool, and frequent oil changes for the first while are a good idea!

most of all enjoy the thing :D
mitch179
KSRC Member
KSRC Member
 
Posts: 326
Joined: Fri Jan 13, 2006 12:53 pm
Location: GoldCoast Aus

Postby Saki » Thu Oct 12, 2006 2:29 pm

so how do u guys reccomend running that motor in ? i am thinking i might follow this running it hard method of reving it to about 100 in 2nd and 3rd gear then slowing speed under compression
User avatar
Saki
KSRC Contributor
KSRC Contributor
 
Posts: 2167
Joined: Wed Feb 22, 2006 5:59 pm
Bike: ZX10R
State: Western Australia

Postby MrStompy » Thu Oct 12, 2006 2:57 pm

the running in period often isnt just for the bike.
its can be for the rider too.

you could use that period to slowly get used to the new bike's handling and power - especially if you are up sizing.

And realistically when you buy a brand new bike you will be riding everywhere and that first 1000k's is over before you know it. I know when i had a brand new bike i did that first 1000ks in the first 2 weeks of owning it.
User avatar
MrStompy
KSRC Regular
KSRC Regular
 
Posts: 892
Joined: Tue Aug 30, 2005 12:36 am
Location: Tropical Northern Rivers NSW
Bike: It's not worth Mentioning
State: New South Wales

Postby mike-s » Thu Oct 12, 2006 3:14 pm

Saki wrote:hmmm well wonder why did the kawa dealer tell my mate with his ZZR that was new from dealer, was told that cause he did an oil change that his warranty was void.. thats why i assumed the same..

but the dealer told me, u can do exhaust, fender eleminator, and al these extra stuff, he said as long as u don't play with the engine u r fine!!


sounds like your kawa dealer was a bit of an asshat, i guess just dont tell them you did an oil change at 100-20k's ;-)
Image
If it hurts, you aren't doing it right.
User avatar
mike-s
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 6142
Joined: Sat Aug 07, 2004 5:43 am
Location: Arncliffe, Sydney
Bike: Suzuki
State: New South Wales

Postby Stereo » Thu Oct 12, 2006 4:22 pm

Saki wrote:so how do u guys reccomend running that motor in ?


The first step is to buy one............. :P
The world is round. It has no point.
User avatar
Stereo
KSRC Addict
KSRC Addict
 
Posts: 4578
Joined: Thu Aug 11, 2005 8:01 am
Location: Pt Cook, Melbourne, Victoria, Australia, Pacific Ocean, Earth
Bike: ZX10R
State: Victoria

Postby Colette » Thu Oct 12, 2006 8:29 pm

Thanks everyone for the advice :)
User avatar
Colette
Team Cougar
 
Posts: 3089
Joined: Thu Apr 22, 2004 10:20 am
Bike: ZX6R
State: New South Wales

Postby Saki » Sat Oct 14, 2006 7:22 am

Stereo wrote:
Saki wrote:so how do u guys reccomend running that motor in ?


The first step is to buy one............. :P

its already ordered, i hacve already put a deposit on it, just waiting for it to turn up at the shop!
User avatar
Saki
KSRC Contributor
KSRC Contributor
 
Posts: 2167
Joined: Wed Feb 22, 2006 5:59 pm
Bike: ZX10R
State: Western Australia

Postby Minorci » Tue Oct 24, 2006 9:25 pm

Saki wrote:hmmm well wonder why did the kawa dealer tell my mate with his ZZR that was new from dealer, was told that cause he did an oil change that his warranty was void.. thats why i assumed the same..

but the dealer told me, u can do exhaust, fender eleminator, and al these extra stuff, he said as long as u don't play with the engine u r fine!!


Loosing your warranty on doing an oil change is a load of bollocks. As far as im aware as long as you get your dealer service's done on time, it should be sweet.
Image
User avatar
Minorci
Warming up
Warming up
 
Posts: 73
Joined: Sat May 06, 2006 4:38 pm

Postby Neka79 » Wed Oct 25, 2006 12:24 am

i actually didnt think it mattered an iota on WHO put oil in it..i thought the warranty would only be void if u openned the motor up in any way??
does it state u MUST have the bike serviced by a Genuine Kwaka Dealer to maintain warranty??


as for the run in, i dont stress too much abt it... just for the 1st 400 or so km nice and easy..then increase the revs by 1000rpm every 1000km...thats what i did ...
no labouring of motor, no hard engine braking, no wheelies...no snapping the throttle on.... everything nicve and smooth...

but im also guessing by now uve run her in neway...lol...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Postby Saki » Wed Oct 25, 2006 8:19 am

i've done 900k on mine i haven't changed the oil in mine yet either, i was speaking to my kawa dealer as well as a few other bike mechanics and they reckon that the filter will catch most of that shit! but the service will b done

As for my run in, i have been riding it between 4000 - 8000 rpm each gear.

I am sort of wondering wether i should have dropped the "run in" oil out of it! i mean by the feel of riding it, it doesn't feel like its lacking any power! should i drop the oil out now, or just leave it for another 100km ? till the 1000k service ?
User avatar
Saki
KSRC Contributor
KSRC Contributor
 
Posts: 2167
Joined: Wed Feb 22, 2006 5:59 pm
Bike: ZX10R
State: Western Australia

Postby Neka79 » Wed Oct 25, 2006 9:26 pm

Saki wrote:i've done 900k on mine i haven't changed the oil in mine yet either, i was speaking to my kawa dealer as well as a few other bike mechanics and they reckon that the filter will catch most of that shit! but the service will b done

As for my run in, i have been riding it between 4000 - 8000 rpm each gear.

I am sort of wondering wether i should have dropped the "run in" oil out of it! i mean by the feel of riding it, it doesn't feel like its lacking any power! should i drop the oil out now, or just leave it for another 100km ? till the 1000k service ?

if its done 900km ..i dont see what another 100km is gunna do...

then again, i didnt change my 1st oil till 1000km and my bike was OK for its 14,000km life.....

i did however run mineral oil for the first 6000km from memory...
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Postby hoffy » Wed Oct 25, 2006 10:54 pm

Ride and service it as the manufacturer intended is my advice, given to me by a wise man, with a shaved head and a beard named Phil, and his bike has done 110,000+, so Im taking his word for it..
hoffy
Team Barge
Team Barge
 
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Postby Neka79 » Wed Oct 25, 2006 11:52 pm

hoffy wrote:Ride and service it as the manufacturer intended is my advice, given to me by a wise man, with a shaved head and a beard named Phil, and his bike has done 110,000+, so Im taking his word for it..

yea...but that bugger will tell ya "its not that far" then make u ride 40km of dirt...lol
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Postby Saki » Thu Oct 26, 2006 7:37 am

[quote="Neka79]
if its done 900km ..i dont see what another 100km is gunna do...

then again, i didnt change my 1st oil till 1000km and my bike was OK for its 14,000km life.....

i did however run mineral oil for the first 6000km from memory...[/quote]

wat happened to it at 14,000k did the motor seize up ?
The manual can't be wrong i spose and the filter would catch most of the small flecks of shit in the motor!!
User avatar
Saki
KSRC Contributor
KSRC Contributor
 
Posts: 2167
Joined: Wed Feb 22, 2006 5:59 pm
Bike: ZX10R
State: Western Australia

Postby Neka79 » Thu Oct 26, 2006 11:09 pm

Saki wrote:
wat happened to it at 14,000k did the motor seize up ?
!!

nah..if that hadda happened i woulda told ya, it woulda been relevant....

my vtr arse-punched a rock wall on macquarie pass....
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

PreviousNext

Return to ZX-R / Ninja Current Model Discussion

Who is online

Users browsing this forum: No registered users and 8 guests

cron