ZX6R, ZX10R, ZX14R, Ninja 1000 etc
Mon Jan 30, 2012 8:11 am
My Crim's FI light keeps coming on and im a bit concerned.
It hasn't lost power at all and runs exactly as it should but the light stays on now.
It happened to me a little while ago but i put it down to bad fuel but the last
couple of times ive been out for a ride it comes on amd stays on.
Any help as to what could be the problem & how to fix it would be
a great help.
Thanx in advance.
Mon Jan 30, 2012 8:28 am
Exhaust valve working?
There is a way to check the codes somehow...
Mon Jan 30, 2012 11:08 am
Wattie wrote:Exhaust valve working?
There is a way to check the codes somehow...
I have a full akro system on it , so would there even be an exaust valve on it ?
or is it the black box with the hex looking nut that turns when you
turn the bike on ?
Mon Jan 30, 2012 11:10 am
Under the rear seat.
Mon Jan 30, 2012 11:25 am
That's it. Has the light come on since you put the Akra on?
You normally stick a little doovey on instead of the hex thingy to stop it rotating and it tricks it into thinking the exhaust valve is still there
Mon Jan 30, 2012 11:29 am
The box may be dead. Happened in robracers 6.
If the code says its that, then get a servo buddy and get rid of the servo.
Yeah it's the hex thing under the seat.
Mon Jan 30, 2012 11:35 am
Ok ill check it out this arvo.
Mon Jan 30, 2012 9:50 pm
Servo is the problem, just checked it and its jamed up but if I turn it by hand it will work but not by itself.
thanx for the advise and help guys
much appreciated.
Have already ordered a Servobuddy from the website you put up greenmeanie cheers mate
Mon Jan 30, 2012 10:38 pm
See money fixes all !
Mon Feb 20, 2012 5:39 am
FI light problem solved.
Servo buddy installed and tested @ the old rd race track
Yesterday and has been tried & test under the most extreem of condition.
Now i have an error free crim once more.
Thanx to all who steered me in the right direction as to the problem
Mon Feb 20, 2012 10:12 am
Excellent.
Sat Mar 03, 2012 6:29 pm
Gazza wrote:FI light problem solved.
Servo buddy installed and tested @ the old rd race track
Yesterday and has been tried & test under the most extreem of condition.
Now i have an error free crim once more.
Thanx to all who steered me in the right direction as to the problem

I'd heard they were unrelaible those Crims
Sat Mar 03, 2012 6:32 pm
Servobuddy is fantastic
Sat Mar 03, 2012 6:47 pm
Yeah, I had that problem with one of my bikes. I removed the globe!
Powered by phpBB © phpBB Group.
phpBB Mobile / SEO by Artodia.