Helmet problem

Riding gear and Clothing Discussion

Helmet problem

Postby hidepenny » Wed Jan 11, 2006 2:42 pm

Hey guys, i don't know if it happens to lots of you, but unfortunately i'm one of them, the problem is

how do ppl with glasses wear helmet? do they upsize their helmet by one or two just to fit the glasses? or is there special helmets that cater for that?

or somehow ppl cut or remove the cheek pad in the helmet so the arms of the glasses can fit thru?
hidepenny
KSRC Regular
KSRC Regular
 
Posts: 970
Joined: Mon Dec 19, 2005 5:58 pm
Location: Melbourne - Eastern
Bike: ZX6R
State: Victoria

Postby chameleon » Wed Jan 11, 2006 2:46 pm

Why don't you get different glasses? My helmet fits like a glove "snug" and I wear sunnies inside it with no drama. Of course I put the glasses on "after" the helmet is on. Doesn't work the other way.
chameleon
KSRC Regular
KSRC Regular
 
Posts: 763
Joined: Sat Nov 26, 2005 8:38 am
Location: Briso

Postby icebreaker » Wed Jan 11, 2006 2:52 pm

I bought metal framed oakley sunnies and had to give up wearing them on the bike after 1 day, cause the arms kept getting bent.

I know a few people on here wear glasses, it prob comes down to the style of glasses and helmet..

You might be able to press into the helmet with something right where the frames sit so that the padding has abit more movement behind it.. dunno if that's a goer or not but short of cutting the lining it's prob about all you could do..


Your not wear Dame Edna Everage glasses are ya??? Cause no way those giant things will fit... :P :P :P
Ducati Monster S2R1000
Kawasaki '77 Z1000A1, '76 z900 (Project) & '78 Z1000A2 (Project)

http://www.unihost.com.au - Affordable, Reliable Webhostng
icebreaker
Administrator
Administrator
 
Posts: 2794
Joined: Wed Apr 07, 2004 7:07 pm
Location: Hobart
Bike: Z1000
State: Tasmania

Postby hidepenny » Wed Jan 11, 2006 4:44 pm

well.......i upsized by helmet by one, just for the sake of glasses, but when time goes by , the wear of lining shows and the helmet is now becoming loose, it's only been 2 months.
hidepenny
KSRC Regular
KSRC Regular
 
Posts: 970
Joined: Mon Dec 19, 2005 5:58 pm
Location: Melbourne - Eastern
Bike: ZX6R
State: Victoria

Postby MrStompy » Wed Jan 11, 2006 4:46 pm

i found that wearing sunnies in my helmet would eventually give me a headache.

without the sunnies its fine. its probably just my glasses though.

I got a tinted lense now so thats my problem solved.

that doesnt help at all to answer your question though.
but i got no ideas... sorry
User avatar
MrStompy
KSRC Regular
KSRC Regular
 
Posts: 892
Joined: Tue Aug 30, 2005 12:36 am
Location: Tropical Northern Rivers NSW
Bike: It's not worth Mentioning
State: New South Wales

Postby John H » Wed Jan 11, 2006 4:54 pm

My Shoei TZ1 seems to have no trouble fitting my glasses frames. What brand/model helmet have you got?
'01 Kawasaki ZZR250 (my motorbike)
'96 Daihatsu Charade TE (my other motorbike)
'91 Alfa 164 3.0 V6 (a.k.a. the money pit)
John H
KSRC Member
KSRC Member
 
Posts: 231
Joined: Tue Nov 15, 2005 12:34 pm
Location: Melbourne

Postby Gosling1 » Wed Jan 11, 2006 4:56 pm

you should never upsize your lid to fit glasses - rather you need to get your lenses fitted to helmet-friendly 'frames' . ie frames with thin metal arms and good strong hinges. Its the only way around this problem.

I will not ride without sunglasses, and always look for a style with the thinnest arms out there, these will work and not give you a headache. Normally you get a headache because the thick arms press tight against your temples...... :x :x ugly scenes.

Talk to your optometrist, he should be able to sort out a decent frame to suit your lenses.

8)
".....shut the gate on this one Maxie......it's the ducks guts !!............."
User avatar
Gosling1
Team Donut
Team Donut
 
Posts: 13823
Joined: Mon Jun 20, 2005 9:30 pm
Location: Anarchy Road
Bike: Z900
State: ACT

glasses

Postby krafty55 » Wed Jan 11, 2006 4:58 pm

Its not a good idea to upsize ur helmet for the sake of ur glasses, are the glasses u r talking about prescription, maybe go to opsm and get a frame that is a size smaller, i've worn glasses for many years now and had the same problem when i 1st bought a helmet, its a real paint the the a*** when u cant focus properly, i now have contact lenses when i ride but on windy days they can dry out, where abouts in melbourne are you by the way lindsay
Looking for people to ride with in my area or somewhere close.
krafty55
Warming up
Warming up
 
Posts: 87
Joined: Wed Nov 23, 2005 10:04 am
Location: Altona Meadows Melbourne

Postby greeny » Wed Jan 11, 2006 5:03 pm

I found before i got a tinted visor that metal frames would bend and basically be a bastard to get on.
But frames like the one found on Oakley Fives were easier to get on and more comforable to wear inside your lid.

Thats my 2 cents
User avatar
greeny
KSRC Member
KSRC Member
 
Posts: 415
Joined: Thu Aug 04, 2005 8:00 am
Location: Adelaide- S.A.
Bike: Yamaha
State: South Australia

Postby Smitty » Wed Jan 11, 2006 6:23 pm

Gosling1 wrote:you should never upsize your lid to fit glasses - rather you need to get your lenses fitted to helmet-friendly 'frames' . ie frames with thin metal arms and good strong hinges. Its the only way around this problem.

I will not ride without sunglasses, and always look for a style with the thinnest arms out there, these will work and not give you a headache. Normally you get a headache because the thick arms press tight against your temples...... :x :x ugly scenes.

Talk to your optometrist, he should be able to sort out a decent frame to suit your lenses.

8)


i am with Gos here
no problems with helmets (AGV Shoei etc)
and I ALWAYS ride with glasses
...sunnies or if dull, yellow safety glasses
but
the arms are thin...and slide in after I put the helmet on
get some professional help if you still have an issue!


cheers
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10910
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

Postby esie » Wed Jan 11, 2006 10:50 pm

I wear prescription glasses or prescription sunglasses at all times. My sunglasses and usual glasses have a thin metal frame and these slide well between the helmet and my head, causing no headaches. I also have a couple of pairs of plastic framed glasses, these I can't wear under the helmet. When you next go to the optometrist for new glasses (and if you are in Brisbane, see my sister at Eyecare Plus at either Ascot or Springwood) take your helmet with you to try the glasses on underneath.
Cheers,
Anne

Note: No trees were killed in the sending of this message, but a large number of electrons were terribly inconvenienced.
User avatar
esie
KSRC Contributor
KSRC Contributor
 
Posts: 1357
Joined: Mon Mar 28, 2005 1:33 pm
Location: Brisbane
Bike: Z1000
State: Queensland

Postby Neka79 » Wed Jan 11, 2006 11:14 pm

mate..i agree re getting a bigger lid...and as u now kno..its getting loose cos the paddings softening up...
i use to have probs finding sunnies i could wear under a lid, and therefore gave up...tho as i have really sooky eyes with bright light, ive had to start doing it...
ive found my old Oakley "twenty" work a treat...they are comfy underneath,...and i got a new pair for every day use (u get chips in em, the rubber arm sleeves rip etc..but they were 4 yrs old neway)...
also with my lid (xlite) theres heaps of room for them, unlike my old arai,agv or axo which all made my head hurt (same sunnies)...
can u get glasses with a oakley frame ?? (i would if i had to get googles)
Neka
2006 Zeddy 1000
1996 VS series 2 S pak Ute
Image
User avatar
Neka79
Extreme Post Whore :-)
Extreme Post Whore :-)
 
Posts: 13115
Joined: Fri Apr 23, 2004 12:20 am
Location: Adelaide......nah its cool..no really!!
Bike: Z900
State: South Australia

Postby Nanna10r » Wed Jan 11, 2006 11:19 pm

Ann hit it on the Head as usual. :wink:

There's another thread here with lots of opinions & good advoce in it as well, hit the old search function for that one ,

Anyway get small metal frame Glasses. i have polaroid self timting perspex prescription glasses, get the spring loaded arm frames but not the titanium flexie arms.
Then with helmet in hand, head to your local opthalmic dispenser for a fitting,. they can shrten & bend the arms to fit. May take a coupla visits to get them sorted for long use but its worth it.
Oh on another point i found the frames with movable nose rests stay back on your face better inside the helmet.
hth.
Cheers Brett
"Nan & Pop Racing"
Poppy Hops on .... CBR150 (Superlite) CBR954 "Blade"
Nanna Naps on .... MoriWAKI NSR85 (Motolite) ZX10R "Crim"
We may ride like Old Can'ts, But Phuk we look DOOG !!!!!!
User avatar
Nanna10r
Team Ninja
 
Posts: 4291
Joined: Wed Jul 14, 2004 10:42 pm
Location: Brisbane Australia
Bike: ZX10R
State: Queensland

Postby z900/zx9 » Fri Jan 13, 2006 3:32 pm

Lazer eye surgery :shock:
http://tinypic.com/hu369k.jpg[/img]
[b]Z900, z900RS , H2 Ninja 1000 Supercharged. FPV Supercharged Pursuit ute..
User avatar
z900/zx9
KSRC Contributor
KSRC Contributor
 
Posts: 2796
Joined: Wed Nov 02, 2005 1:33 pm
Location: Kawasakiville Victoria

Postby red_dave » Fri Jan 13, 2006 3:36 pm

What about a "Seeing Eye Greyhound"?

5obsessed.gif
Image
User avatar
red_dave
Team Kuda
Team Kuda
 
Posts: 7973
Joined: Thu Oct 07, 2004 12:47 pm
Location: Dodgy BrisVegas
Bike: ZX6R
State: Queensland

Next

Return to Riding Gear Discussion

Who is online

Users browsing this forum: No registered users and 7 guests