Helmet Sizing - When is too tight, too tight?

Riding gear and Clothing Discussion

Helmet Sizing - When is too tight, too tight?

Postby gray_rm » Wed Jun 01, 2005 1:43 pm

I have a basic question - I think my head is inbetween helmet sizes (no comments from those who've seen me :wink: )

My current lid wobbles a little bit at speed, especially during a shoulder check. One size down makes me look like a cabbage patch kid.

Can anyone describe their "Tight is too tight" theory on helmet sizing?
Richard
'02 636
Image
gray_rm
KSRC Member
KSRC Member
 
Posts: 189
Joined: Fri Apr 08, 2005 11:48 am
Location: North Sydney, NSW
Bike: ZX6R
State: New South Wales

re: Helmet Sizing - When is too tight, too tight?

Postby Yankee » Wed Jun 01, 2005 1:47 pm

when i bought a new lid.....
i tried on about a million helmets!! from differnt makes, stores, models, brands, prices, etc, etc......
you'll eventually find a brand/model that feels like it is just "outter skin".... buy it in the size that is VERY TIGHT, as it'll 'wear in'......
if u're really having probs (cuz you have an odd shaped cranium) go for models with replacable cheek pads and things so you can more tailor it to suit your noggin
that's about it!
Image
Yankee
Team Ninja
 
Posts: 858
Joined: Fri Nov 05, 2004 9:17 pm
Location: SEQ 4000

re: Helmet Sizing - When is too tight, too tight?

Postby icebreaker » Wed Jun 01, 2005 1:50 pm

i think the helmet will give after a few wears..

I know mine has... and the misses helmet is much bigger on her now than it was.. the lining packs down abit after a while.

Looking back I wish i'd gotten a smaller helmet, but I had 1 hour to pick up a helmet so I could pick up the ZX2R, so I was happ just to find a Green Shoei that fitted, considering every other helmet wouldn't fit over my head.. and I only ended up with a Large.
Ducati Monster S2R1000
Kawasaki '77 Z1000A1, '76 z900 (Project) & '78 Z1000A2 (Project)

http://www.unihost.com.au - Affordable, Reliable Webhostng
icebreaker
Administrator
Administrator
 
Posts: 2794
Joined: Wed Apr 07, 2004 7:07 pm
Location: Hobart
Bike: Z1000
State: Tasmania

re: Helmet Sizing - When is too tight, too tight?

Postby NovaCoder » Wed Jun 01, 2005 1:55 pm

Best advice I can give you is buy one that is tight when new because they tend to 'bed-down' over time.

I brought a Shark that seemed like a perfect fit but after 6 months I had the dreaded 'wobble' and so it had to go :cry:

My next helmet was an AGV which was a squeeze to get on new (no so much that it hurt though, that would be silly) and now even after 4 years it's still a snug fit....ok, it does smell a bit but that's another story :P
Motorcycle's are inherently unstable... :twisted:

Race #87 - Blog
NovaCoder
KSRC Member
KSRC Member
 
Posts: 410
Joined: Thu Feb 10, 2005 2:48 pm
Location: Kilsyth, Vic, Oz

re: Helmet Sizing - When is too tight, too tight?

Postby gray_rm » Wed Jun 01, 2005 2:06 pm

Thanks Guys - maybe the Cabbage Patch look will fade after a few wears 5footballhelmet.gif
Sounds like tight is better than loose & too tight that stops the blood flow is dumb... why does all this sounds vaguely familiar?
Richard
'02 636
Image
gray_rm
KSRC Member
KSRC Member
 
Posts: 189
Joined: Fri Apr 08, 2005 11:48 am
Location: North Sydney, NSW
Bike: ZX6R
State: New South Wales

re: Helmet Sizing - When is too tight, too tight?

Postby icebreaker » Wed Jun 01, 2005 2:15 pm

mine feels ok, but at highish speed it is very noisy..
at anything over about 160-240+ the front of the helmet is literally touching my lips.. or if poke my tongue out a tiny bit the helmet is right there..

just wish i could afford a new one.. a Nakano Race Rep would be nice.. big $$$ though
Ducati Monster S2R1000
Kawasaki '77 Z1000A1, '76 z900 (Project) & '78 Z1000A2 (Project)

http://www.unihost.com.au - Affordable, Reliable Webhostng
icebreaker
Administrator
Administrator
 
Posts: 2794
Joined: Wed Apr 07, 2004 7:07 pm
Location: Hobart
Bike: Z1000
State: Tasmania

re: Helmet Sizing - When is too tight, too tight?

Postby matchan » Wed Jun 01, 2005 2:18 pm

Hi Richard,

Tighter is better when they are new 3 things I check for are:

if you put your chin down on your chest, can you pull the helmet off from the back ?

if you push down lightly on the top of the helmet while wearing it does the top of the visor obstruct your vision.

make sure it fits uniformly, ie not spots tighter than others.

Good Luck

Matt
User avatar
matchan
KSRC Contributor
KSRC Contributor
 
Posts: 1351
Joined: Thu Apr 22, 2004 12:03 am
Location: Sydney
Bike: ZX6R
State: New South Wales

Re: re: Helmet Sizing - When is too tight, too tight?

Postby MickLC » Wed Jun 01, 2005 2:19 pm

Dan wrote:....the front of the helmet is literally touching my lips.. or if poke my tongue out a tiny bit the helmet is right there..



You might want to reword that a bit Dan :wink: :lol: :lol: :lol: :lol:
'13 Z1000, '76 Z650+,'91 KLR250, '95 ZX6R Racebike
User avatar
MickLC
Team Crim
 
Posts: 5429
Joined: Wed Apr 21, 2004 1:04 pm
Bike: Z1000
State: ACT

Re: re: Helmet Sizing - When is too tight, too tight?

Postby gray_rm » Wed Jun 01, 2005 2:23 pm

Mick C wrote:
Dan wrote:....the front of the helmet is literally touching my lips.. or if poke my tongue out a tiny bit the helmet is right there..

You might want to reword that a bit Dan :wink: :lol: :lol: :lol: :lol:

... I was going to say I've never licked a helmet - but thought better about it! :roll:

Thanks Matt - it's a tight fit, uniformly - and if it 'beds in' as everyone says, I reckon she's sweet.
Richard
'02 636
Image
gray_rm
KSRC Member
KSRC Member
 
Posts: 189
Joined: Fri Apr 08, 2005 11:48 am
Location: North Sydney, NSW
Bike: ZX6R
State: New South Wales

Re: re: Helmet Sizing - When is too tight, too tight?

Postby Smitty » Wed Jun 01, 2005 2:25 pm

gray_rm wrote:Thanks Guys - maybe the Cabbage Patch look will fade after a few wears 5footballhelmet.gif
Sounds like tight is better than loose & too tight that stops the blood flow is dumb... why does all this sounds vaguely familiar?


keep trying em..different makes brands models
if you think it fits the forehead area ..not too tight or loose
try smiling..if you can easily, its too loose
if you struggle...its the right fit
GOTTA LUV the 12R!!
User avatar
Smitty
VIP MEMBER
VIP MEMBER
 
Posts: 10900
Joined: Wed Apr 21, 2004 1:59 pm
Location: 3rd rock from the Sun
Bike: ZX12R
State: Victoria

re: Helmet Sizing - When is too tight, too tight?

Postby Cath » Wed Jun 01, 2005 2:54 pm

Actually, this is probably a good thread to ask my helmet question.

Are you supposed to be able to touch your helmet with your chin, just by moving your jaw forward a little? I worry that if I come off, my brains will be fine, but I'll definitely break my jaw (something that is apparently a total pain in the arse, slow to heal and painful).
Road: 2005 ZX10R - not named yet
Road: 2008 Z750 - Kwak
Track: 2006 ZX6R - Yoshi (with a very Genki undertail)
User avatar
Cath
KSRC Addict
KSRC Addict
 
Posts: 3447
Joined: Wed Oct 13, 2004 9:08 pm
Location: Yarramalongwayaway
Bike: ZX10R
State: New South Wales

re: Helmet Sizing - When is too tight, too tight?

Postby Colette » Wed Jun 01, 2005 3:26 pm

What type of helmet do you have? It might be worth checking a different brand as an option.

I have an Arai and one of the reasons I got it was because it fits me really well. I tried on a Shoei (same head size), but it seemed to have a lot more space at the bottom front part.
User avatar
Colette
Team Cougar
 
Posts: 3089
Joined: Thu Apr 22, 2004 10:20 am
Bike: ZX6R
State: New South Wales

re: Helmet Sizing - When is too tight, too tight?

Postby seraph » Wed Jun 01, 2005 4:05 pm

Cath, I'd check a few brands because I think they are all different shapes inside (makes sense) I also found the Shoei way too roomy in teh cheeks and jaw area, and my arai fits like a dream, nice 'n' snug but with stick-out-tongue room in front (v.imp). Maybe if your helmet is likely to mash your face into a pulp, you could try one like the shoei with more room in the jaw area. -J.
the sweet things don't stick around but the bullshit lasts forever
http://www.twistybitz.net
seraph
KSRC Regular
KSRC Regular
 
Posts: 648
Joined: Wed Feb 23, 2005 9:31 am
Location: 1000 miles from home
Bike: ZX12R
State: Queensland

re: Helmet Sizing - When is too tight, too tight?

Postby red_dave » Wed Jun 01, 2005 4:08 pm

Cath... I can touch the front with my jaw (if i poke it out that is) in my X-Lite helmet but i'm not sure about the jaw-breaking thing... I hit the right side and back right corner of helmet during my recent off.

It would be interesting to know if anyone has had a Jaw injury from this? :roll:
Last edited by red_dave on Wed Jun 01, 2005 4:09 pm, edited 1 time in total.
Image
User avatar
red_dave
Team Kuda
Team Kuda
 
Posts: 7973
Joined: Thu Oct 07, 2004 12:47 pm
Location: Dodgy BrisVegas
Bike: ZX6R
State: Queensland

re: Helmet Sizing - When is too tight, too tight?

Postby Cath » Wed Jun 01, 2005 4:08 pm

HAHAHA! Thanks anyway, seraph and Colette. I have a Shoei already. Maybe I just have the jaw of a Neanderthal? :lol:
Road: 2005 ZX10R - not named yet
Road: 2008 Z750 - Kwak
Track: 2006 ZX6R - Yoshi (with a very Genki undertail)
User avatar
Cath
KSRC Addict
KSRC Addict
 
Posts: 3447
Joined: Wed Oct 13, 2004 9:08 pm
Location: Yarramalongwayaway
Bike: ZX10R
State: New South Wales

Next

Return to Riding Gear Discussion

Who is online

Users browsing this forum: No registered users and 27 guests