Helmet Safety Standards - Australia

Riding gear and Clothing Discussion

Helmet Safety Standards - Australia

Postby Johnnyflash » Wed Jul 18, 2012 8:03 am

Howdy,

Since moving here earlier this year I have noticed that all the helmets in Oz have a silver standards sticker on them.
I brought an Arai RX-7 Corsair GP with me that has the British ACU stamp on it. This is the standard needed for racing in the UK and Ireland.

Is it legal to use this on the roads and more importantly, can it be used for track days?!

Dont fancy shelling out another $1100 for a replacement Arai!

Cheers
Johhny.
Johnnyflash
KSRC Member
KSRC Member
 
Posts: 105
Joined: Sun Jul 01, 2012 6:36 am
Bike: ZX10R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby fireyrob » Wed Jul 18, 2012 9:33 am

Definately not legal on the roads unfortunately. As for trackdays or racing I doubt it but Im sure a more qualified opinion will pop up soon! Yes its ridiculous :(
09 ZX6R
03 Zthou
User avatar
fireyrob
KSRC Addict
KSRC Addict
 
Posts: 4828
Joined: Wed Mar 12, 2008 10:13 am
Location: Ashfield
Bike: Z1000
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby z900/zx9 » Wed Jul 18, 2012 9:49 am

Not more qualified but nope on the roads and probably nope on the track,depends on the scrutenier but take a approved one just in case or buy a helmet.I bought a shoei x12 helmet from shoei .com for $850 recently which is a australian site.Pretty good value since most people wanted $1200.00
http://tinypic.com/hu369k.jpg[/img]
[b]Z900, z900RS , H2 Ninja 1000 Supercharged. FPV Supercharged Pursuit ute..
User avatar
z900/zx9
KSRC Contributor
KSRC Contributor
 
Posts: 2795
Joined: Wed Nov 02, 2005 1:33 pm
Location: Kawasakiville Victoria

Re: Helmet Safety Standards - Australia

Postby Wattie » Wed Jul 18, 2012 10:00 am

gotta protect ya melon! :kuda:
Wattie #55
ZX10R "The Crim"
ZX10R "Gumby"
Proudly Supported by Allfixed Automotive 9634 1455
sam & srt, survived
RGM, left a message
User avatar
Wattie
VIP MEMBER
VIP MEMBER
 
Posts: 10039
Joined: Mon Oct 31, 2005 12:23 pm
Location: Bligh Park
Bike: ZX10R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby MadKaw » Wed Jul 18, 2012 10:01 am

I believe its illegal to use it on the road, but is OK to use at race meetings (most race meeting state FIM helmet regs which approves most international standards).
Eastern Creek ride days state helmets must meet Australian Standards, but I've never had one checked.
Dave
2010 Z1000
ex bikes
05 ZX-10R Race Bike - No.77
95 ZXR750R M Race Bike - No. 75
98 ZX9R Race Bike - No. 000
zx6r, zx7r, GPX750, GPX500, lots of KX's.
Image
I ride way too fast to worry about cholesterol
User avatar
MadKaw
Administrator
Administrator
 
Posts: 9666
Joined: Tue Apr 20, 2004 4:33 pm
Location: Windsor or the Creek..
Bike: ZX10R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby red_dave » Wed Jul 18, 2012 10:41 am

These are approved for use in Australia...

Image


:kuda:
Image
User avatar
red_dave
Team Kuda
Team Kuda
 
Posts: 7973
Joined: Thu Oct 07, 2004 12:47 pm
Location: Dodgy BrisVegas
Bike: ZX6R
State: Queensland

Re: Helmet Safety Standards - Australia

Postby Johnnyflash » Wed Jul 18, 2012 11:36 am

Jeez...... that is some load of S%ite!!!!

Tis good enough for the lads riding flat chat around the IOM TT circuit but not good enought to tip to the shops in Sydney! :roll:

Wife wont be too pleased, something else to spend some cash on!!! :twisted:
Johnnyflash
KSRC Member
KSRC Member
 
Posts: 105
Joined: Sun Jul 01, 2012 6:36 am
Bike: ZX10R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby EDU » Wed Jul 18, 2012 12:05 pm

More than accepted at both track days and race meetings!
User avatar
EDU
KSRC Regular
KSRC Regular
 
Posts: 526
Joined: Wed Nov 24, 2010 12:30 pm
Location: Bondi/Tamarama
Bike: ZX6R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby Johnnyflash » Wed Jul 18, 2012 12:49 pm

EDU wrote:More than accepted at both track days and race meetings!


This is the ACU stamp!

Are you saying that it will be accepted at track days?

I would sicken me to have to buy a new helmet for a trackday !
Attachments
ACU.jpg
ACU.jpg (13.45 KiB) Viewed 7958 times
Johnnyflash
KSRC Member
KSRC Member
 
Posts: 105
Joined: Sun Jul 01, 2012 6:36 am
Bike: ZX10R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby steve086 » Wed Jul 18, 2012 1:02 pm

Does it have a snell sticker? Or label it could be inside stitched into it cause that it is recognized everywhere and will be fine to use racing or track
User avatar
steve086
KSRC Member
KSRC Member
 
Posts: 268
Joined: Wed Oct 06, 2010 9:00 pm
Location: albion park nsw
Bike: Honda
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby Johnnyflash » Wed Jul 18, 2012 1:45 pm

No Snell sticker but just found this webpage from Motorcycling Australia!

http://www.ma.org.au/fileadmin/user_upl ... elmets.pdf

My Arai is Marked ECE22-05 - E04 (Netherlands) so should be no problem using it out in the creek........ Using it on the road is another matter :cry:
Johnnyflash
KSRC Member
KSRC Member
 
Posts: 105
Joined: Sun Jul 01, 2012 6:36 am
Bike: ZX10R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby EDU » Wed Jul 18, 2012 2:33 pm

Johnnyflash wrote:
EDU wrote:More than accepted at both track days and race meetings!


This is the ACU stamp!

Are you saying that it will be accepted at track days?

I would sicken me to have to buy a new helmet for a trackday !



Yes, I have 2 helmets I bought from the UK and they never had a problem with any of them.
User avatar
EDU
KSRC Regular
KSRC Regular
 
Posts: 526
Joined: Wed Nov 24, 2010 12:30 pm
Location: Bondi/Tamarama
Bike: ZX6R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby pittster » Wed Jul 18, 2012 2:41 pm

I'm in no way condoning this but alot of the HD crew get there skull cap's imported in and "aquire" the little AS stickers to put on, you could "aquire" a sticker to use it on the road. It's not like the helmet dosen't meet the set safety standard's unlike the skull caps which are about as good as a stack hat. :kuda:

Image = Image
Kawasaki ZX-10R 2008 - R77 Yoshi full system, PC3 Custom Mapped, Benneli bar end mirrors, Puig Double Bubble, Radiator protector, CircuitOne Mirror blanks, Pazzo levers, Shift-I, etc
User avatar
pittster
KSRC Member
KSRC Member
 
Posts: 254
Joined: Wed Mar 02, 2011 12:35 pm
Location: Newcastle
Bike: ZX10R
State: New South Wales

Re: Helmet Safety Standards - Australia

Postby aardvark » Wed Jul 18, 2012 8:47 pm

User avatar
aardvark
Apprentice Post Whore :-)
Apprentice Post Whore :-)
 
Posts: 5766
Joined: Wed Apr 07, 2004 6:45 pm
Location: Adelaide, S.A.
Bike: Yamaha
State: South Australia

Re: Helmet Safety Standards - Australia

Postby hoffy » Wed Jul 18, 2012 8:57 pm

Wattie wrote:gotta protect ya melon! :kuda:


ditto..
hoffy
Team Barge
Team Barge
 
Posts: 8744
Joined: Sun Oct 30, 2005 10:59 am
Bike: Z1000
State: New South Wales

Next

Return to Riding Gear Discussion

Who is online

Users browsing this forum: No registered users and 35 guests