hey guys i'm new to forum, i was wondering if anybody knows where and waht footpegs with rubber on then i can fit on my er6n 2006 model.
just to reduce vibration a little
Kawasaki Sportsbike Riders Club - Australia - Online Forum
Australian Kawasaki Sportsbike Riders Discussion Forum - All Welcome, free and easy to join, just click "register" below - www.ksrc-au.com
foot pegs
7 posts
• Page 1 of 1
foot pegs
by er6nkawasaki » Sat Nov 17, 2012 11:42 pm
- er6nkawasaki
- Newbie
- Posts: 2
- Joined: Sat Nov 17, 2012 11:37 pm
- Bike: ER6
- State: New South Wales
Re: foot pegs
by Stuzrx » Sun Nov 18, 2012 9:22 pm
G'day mate ,welcome to what I call "Team Green Central".A place where you'll find all sorts of handy/interesting/useful and useless information!
I fitted a set of ZRX footpegs, with rubber inserts, to my girls then ride an '07 ER-6,for the exact same reason,vibration. I had to give the ZRX pegs a soft run on a bench grinder for them to fit properly,didn't have to take much off. The pins fitted very easily but pegs would'nt fold all way down,hence the final shaping on the grinder.According to my girl Kerry it worked a treat.
You may be able to find something at a wreckers that fits staight up.This is what i did so if it helps ,goodoh !
I fitted a set of ZRX footpegs, with rubber inserts, to my girls then ride an '07 ER-6,for the exact same reason,vibration. I had to give the ZRX pegs a soft run on a bench grinder for them to fit properly,didn't have to take much off. The pins fitted very easily but pegs would'nt fold all way down,hence the final shaping on the grinder.According to my girl Kerry it worked a treat.
You may be able to find something at a wreckers that fits staight up.This is what i did so if it helps ,goodoh !
I luurrve the smell of 2stroke in the mornin'.
'09 Z750 - '77 RD400 - '72 S1 250 Triple - '04 SV650.
'09 Z750 - '77 RD400 - '72 S1 250 Triple - '04 SV650.
- Stuzrx
- KSRC Member
- Posts: 301
- Joined: Thu Dec 16, 2010 6:37 am
- Location: Casino.
- Bike: Z750
- State: New South Wales
Re: foot pegs
by bonester » Sun Nov 18, 2012 10:52 pm
Would be good to know if a suitable peg can be found. Factory pegs for Er6ns cost $90!!!!!!!!!!!! Peg only. I bought chinese zx6r,zx10r, pegs which look identical and seem to be similar in strength- break sometimes, but not always when the bike is dropped, for $12 A PAIR to my door off ebay and they come with springs, pivots and c washers. No rubber on top though. 
2 X ZRX1200R 4 X ER6N, GT550, 1988 ZX-10, 4 X GPZ250R, 4 X GPZ900R and GPZ750R 
Yeah I like Kawasakis.
Yeah I like Kawasakis.- bonester
- KSRC Contributor
- Posts: 2075
- Joined: Sun Apr 17, 2005 1:00 pm
- Location: Toowoomba/Ipswich Queensland
Re: foot pegs
by 6maniac » Mon Nov 19, 2012 7:54 pm
I think '08 onwards have the rubber insert pegs ???
Try wreckers .....
Try wreckers .....
I've spent over 40 years of my life riding bikes .... the rest of it, I wasted ..
If it's got wheels or tits, it's gonna give you trouble !
HCST #2
Team Black '09 ..... R.I.P. - 2011.
Back in Black....2011.
If it's got wheels or tits, it's gonna give you trouble !
HCST #2
Team Black '09 ..... R.I.P. - 2011.
Back in Black....2011.
-
6maniac - KSRC Addict
- Posts: 4832
- Joined: Thu Oct 18, 2007 7:26 pm
- Location: Hawkesbury
- Bike: Z750
- State: New South Wales
Re: foot pegs
by er6nkawasaki » Wed Nov 21, 2012 6:05 pm
thanks guys, i will try and check out the wreckers this weekend.
also has anyone had a problem with the vibration getting worst (unbearable) between 4000-5000rpm after i installed a set of crash knobs i bought on e-bay.
had to ditch them, a waste of $120.
also has anyone had a problem with the vibration getting worst (unbearable) between 4000-5000rpm after i installed a set of crash knobs i bought on e-bay.
had to ditch them, a waste of $120.
- er6nkawasaki
- Newbie
- Posts: 2
- Joined: Sat Nov 17, 2012 11:37 pm
- Bike: ER6
- State: New South Wales
Re: foot pegs
by 6maniac » Wed Nov 21, 2012 6:12 pm
Check for frame cracking near the right hand top engine mount ..... was a warranty issue on some '05/'06 models.
I've spent over 40 years of my life riding bikes .... the rest of it, I wasted ..
If it's got wheels or tits, it's gonna give you trouble !
HCST #2
Team Black '09 ..... R.I.P. - 2011.
Back in Black....2011.
If it's got wheels or tits, it's gonna give you trouble !
HCST #2
Team Black '09 ..... R.I.P. - 2011.
Back in Black....2011.
-
6maniac - KSRC Addict
- Posts: 4832
- Joined: Thu Oct 18, 2007 7:26 pm
- Location: Hawkesbury
- Bike: Z750
- State: New South Wales
Re: foot pegs
by 6maniac » Wed Nov 21, 2012 6:40 pm
There were revised factory crash knobs issued in '06/'07 because the original brackets were cracking ( mine were replaced under warranty ).
These came with spacer washers to take up the gap when the engine was unbolted from the frame to fit the crash knobs.
These spacers were intended to relieve tension stress in the the frame/engine mount.
HTH .....
These came with spacer washers to take up the gap when the engine was unbolted from the frame to fit the crash knobs.
These spacers were intended to relieve tension stress in the the frame/engine mount.
HTH .....
I've spent over 40 years of my life riding bikes .... the rest of it, I wasted ..
If it's got wheels or tits, it's gonna give you trouble !
HCST #2
Team Black '09 ..... R.I.P. - 2011.
Back in Black....2011.
If it's got wheels or tits, it's gonna give you trouble !
HCST #2
Team Black '09 ..... R.I.P. - 2011.
Back in Black....2011.
-
6maniac - KSRC Addict
- Posts: 4832
- Joined: Thu Oct 18, 2007 7:26 pm
- Location: Hawkesbury
- Bike: Z750
- State: New South Wales
7 posts
• Page 1 of 1
Return to Bodywork & Bling Mods
Who is online
Users browsing this forum: No registered users and 32 guests