The paint job so far(More Updated pics)

[Gazza]

Here are some pics of the new tank.
So far I've taken the stickers off ( which i had to cut out from under the clear coat ) and primed those areas and one spot on top near the fuel
cap opening where there was a small ding, which i had fixed at work with a bit of tig welding.
Next will be the colour.
More pics to come.

P1000880.JPG (122.38 KiB) Viewed 3367 times

P1000881.JPG (121.99 KiB) Viewed 3365 times

P1000882.JPG (95.71 KiB) Viewed 3365 times

P1000883.JPG (105.68 KiB) Viewed 3363 times

P1000884.JPG (118.06 KiB) Viewed 3364 times

[SoundGuy]

Nice one mate

[dutchy]

keep the updates coming!!

[ijuschill]

Nice one Gazza, looks good

[Tinman]

Nice one hopefully you much up that colour I heard It's a bastard to much

[Wattie]

you gotta make sureyou get the right green.

04 and 05 completely different

[Gazza]

you gotta make sureyou get the right green.

04 and 05 completely different

Yeah mate all sorted.
Got the colour matched with a spectrometer , but even the machine couldnt match it perfect
so the guys i got it done buy had to had to tweek it a bit .
But it looks pretty farking close.

[Gazza]

Rubbed back and ready for paint

P1000885.JPG (138.15 KiB) Viewed 3213 times

P1000886.JPG (114.34 KiB) Viewed 3210 times

Sprayed with the new colour

P1000887.JPG (123.97 KiB) Viewed 3209 times

P1000888.JPG (124.32 KiB) Viewed 3209 times

Clear coat and buffing to come.

[robracer]

I thought you were spraying 2K

[boozatboo]

aaaaawww nnnnniiiiiiiiiicceeee !!!

Good job braaaa !!!

You can do mine next ... hee hee hee

[drunkmeerkat]

Hey man, The colour looks tops..

I'm currently looking at respraying my zx6 track bike. Any chance you could post a quick tutorial... or even a few tips to get started..

I have a fairly reasonable compressor and spray gun available at work, but haven't got a clue about which paint to buy or even where to get it from...
Wouldn't know the first thing about preparation either...

[Gazza]

I thought you were spraying 2K

Yeah Rob I am, but only the clear coat , after i put the stickers back on.
The colour is a bass coat that i can paint 2K clear over.

[Nelso]

Looks like you know what you are doing Gazza. Nice job.

[Gazza]

Hey man, The colour looks tops..

I'm currently looking at respraying my zx6 track bike. Any chance you could post a quick tutorial... or even a few tips to get started..

I have a fairly reasonable compressor and spray gun available at work, but haven't got a clue about which paint to buy or even where to get it from...
Wouldn't know the first thing about preparation either...

Having a good compressor & spray gun at your disposal is half the battle.

The most important thing to get right is the prep work eg:
Making sure that if you have Bogged up any damage , that you rub back with the correct
grades of wet & dry, use filler putty where needed and DONT be lazy and cut any corners if you want a mickey mouse job.
But i dont think you need to be that critical for a track bike.

As for what type of paint to use, i just asked a local paint supplier & told him what i was doing and he pointed me in the right direction.

[robracer]

So I have to ask, are you trying to put 2Pak over an acrylic?
The whole idea about 2 pak is that it does not need a clear coat