Grab Rail Fillers

Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?

Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?

you can buy christmas tree plugs to fit off a stand at your local Supercheap auto..they also have rubber grommets that fit too. Check it out.

On the 12 you have to put normal bolts in place of the grab rails/tie down points, as they hold the rear ducktail on, check yours aint the same..if it is Id just put bolts with big washers in..

Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?

you can buy christmas tree plugs to fit off a stand at your local Supercheap auto..they also have rubber grommets that fit too. Check it out.

On the 12 you have to put normal bolts in place of the grab rails/tie down points, as they hold the rear ducktail on, check yours aint the same..if it is Id just put bolts with big washers in..

Cheers Hoffy - Its not true what they say mate, you are a good bloke!

Cheers Hoffy - Its not true what they say mate, you are a good bloke!

Nah it is true you cauht him on an off moment

Cheers Hoffy - Its not true what they say mate, you are a good bloke!

Nah it is true you cauht him on an off moment

nah, i used his login....

Does anyone know if there is some one who makes filler panels for the removal of grab rails on an 01 zx6r?

you can buy christmas tree plugs to fit off a stand at your local Supercheap auto..they also have rubber grommets that fit too. Check it out.

On the 12 you have to put normal bolts in place of the grab rails/tie down points, as they hold the rear ducktail on, check yours aint the same..if it is Id just put bolts with big washers in..

i got a feeling the 6 may be the same... Greeny took the rails of his and had 2 big washers under a couple of bolts...

Nah i dont think it holds it on - well the handles bolt to the subframe but dont have any mounting tabs for the duck tail

Ill take them off again and see how flimsy it is without them

Nah i dont think it holds it on - well the handles bolt to the subframe but dont have any mounting tabs for the duck tail

Ill take them off again and see how flimsy it is without them

Looks like it would have to be bolts then

i removed the grab rails from my e mod 9 had the holes pluged and plastic welded came up sweet.

Attachments

9r_5.jpg (51.87 KiB) Viewed 4084 times

i removed the grab rails from my e mod 9 had the holes pluged and plastic welded came up sweet.

and sum bastard scribbled on ur arm too!!

wash that off!!

i removed the grab rails from my e mod 9 had the holes pluged and plastic welded came up sweet.

and sum bastard scribbled on ur arm too!!

wash that off!!

no can do tuff stickers dont was off, LOL