2010 z1000 indicators...

On the weekend i replaced my oem indicators with some smaller ones to suit the fender elim.

I bought some with standard globes as i assumed led's would flash too fast

The problem is these new indicators flash too fast anyway

So i took out the flasher relay and it says on the front 10w + 21w + LED. Does this mean the globes need to be 10 or 21w to flash correctly? Does this also mean i could have bought LED's after all

the new globes are 23w unfortunately....

Hey mate, you can get fender elims that take the standard indicators, best solution I reckon as they look pretty good..check this out,

http://www.ebay.com.au/itm/Kawasaki-Z10 ... 2eba9681dd

Hey mate, you can get fender elims that take the standard indicators, best solution I reckon as they look pretty good..check this out,

http://www.ebay.com.au/itm/Kawasaki-Z10 ... 2eba9681dd

Too late for that! I had my standard ones mounted to the elim I have but I found they stuck out too far and I kept on booting them as I got on the bike hence the smaller ones...

If I had my chance again I would have bought something similar to that...

Yeah on that elim they sit in closer together...which is good..

Yeah on that elim they sit in closer together...which is good..

Makes yer bum look bigger but

Yeah on that elim they sit in closer together...which is good..

Makes yer bum look bigger but

not if your covering it with a massive arse top box it dont